Embedded Files
Building A Box
Building A Box
Working on Power Pools
Making A Storage Box
Saw Stop/Table Saw
Saw Stop/Table Saw
Wear Safety Glasses
Remove Loose Clothing
Don't Put Your Fingers within 6" of the blade when its moving.
Use the feather board
Use the rip fence or the miter gauge
Vacuum 10 minutes before class ends
What I made
What I made
The table saw has a blade that spin forwards and is used to cut wood.
CNC Router/Machine
CNC Router/Machine
Safety Guidelines:
Wear Safety Classes
Clamp or/and screw all wood down
Always watch the CNC router when it's cutting anything
Do not run a bit over any screws (design around them)
What I made
What I made
Description: The CNC is a 2d & 3D cutting machine with a 3 step process to ensure the cut. First 0 the machine then design you're idea in cad. Cam will tell the machine what do to and where to put the important details. This is where you input your ideas. Now the CNC Router converts this to g-code. Now you can start, but make sure you clamp down the wood. We will use the VcarvePro for cad and shopbot for cam.
Planner Saw
Planner Saw
What I made
What I made
Miter Saw
Miter Saw
Safety Guidelines:
Wear Safety Goggles
Firmly Secure The Material With Your Hand Outside Of the Hand Placement Line Up Against The Fence
Don't Touch Or Manually Move The Blade Guard
Don't Measure Material While On the Saw
What I Made
What I Made
Description: The miter saw is a tool used to make cuts. Using the ruler and Y axis tool you can move the the saw back and forward. You start by measuring your wood to size you want then you bring the saw forward before the wood then start it and put it down to cut though the wood.
Biscuit Joiner
Biscuit Joiner
Make sure your wood is secure.
Make sure you go in and out fast.
Wear safety glasses
It is used to connect 2 pieces of wood.
What I made.
What I made.
The Biscuit Joiner is a tool that makes a slit into wood. First you clamp down the wood. Next you line up the line with where you want to cut. Finally you push in and out quickly to make the slit.
Orbital Sander
Orbital Sander
Make sure you have goggles on.
Only use it on the wood.
Make sure your hand is on the wood.
What I made.
What I made.
A orbital sander is a machine that spins fast. It is used to make wood soft. To use the orbital sander turn it on and put it on the wood,
Edge Lit Lamp Light(colorful)
Edge Lit Lamp Light(colorful)
Brief: Today we learned that we are making a Edge Lit Lamp Light. We are going to use pixel strip lights to light up our lamp. We will program them with Arduino. We will use wood for the base and acrylic for the top. We will use inkscape to code it.
Brief: Today we learned that we are making a Edge Lit Lamp Light. We are going to use pixel strip lights to light up our lamp. We will program them with Arduino. We will use wood for the base and acrylic for the top. We will use inkscape to code it.
Research: Edge Lit Lamp Light
Research: Edge Lit Lamp Light
Idea Development:
Idea Development:
3D Prototyping
3D Prototyping
Evaluation And Testing
Evaluation And Testing
Idea Development
Idea Development
Page updated
Report abuse