Embedded Files
Empowering Today’s Learners to Become Tomorrow’s Leaders
Cable Holders
Cable Holders
1 Plug Holder
File>New>Part.
Units>MMGS.
Front Plane>New Sketch.
Draw a pie wedge.
(Click on image to enlarge)
Select Right Plane>Reference Geometry>Plane.
(Click on image to enlarge)
Move Plane 1 12.5mm to right.
(Click on image to enlarge)
Select Right Plane>Reference Geometry>Plane.
Move Plane 2 12.5mm to left by checking Flip off-set.
(Click on image to enlarge)
Create New Sketch on Plane 1.
Draw Ellipse using the following dimensions.
(Click on image to enlarge)
Create New Sketch on the Right Plane.
Draw Ellipse using the following dimensions.
(Click on image to enlarge)
Create New Sketch on the Plane 2.
Convert Entities from Plane 1 to create Ellipse.
(Click on image to enlarge)
Exit Sketch.
Feature>Lofted Cut.
(Click on image to enlarge)
Finished Part.
(Click on image to enlarge)
3 Plug Holder
File>New>Part.
Units>MMGS.
Front Plane>New Sketch.
Draw a half circle.
Extrude Boss/Base .
(Click on image to enlarge)
Create New Sketch on end of half circle extrusion.
Draw a Pie Wedge and Revolve 180°.
(Click on image to enlarge)
Features>Mirror Revolve to other side of extrusion.
(Click on image to enlarge)
Select Right Plane>Reference Geometry>Plane.
(Click on image to enlarge)
Move Plane 1 12.5mm to right.
(Click on image to enlarge)
Select Right Plane>Reference Geometry>Plane.
Move Plane 2 12.5mm to left by checking Flip off-set.
(Click on image to enlarge)
Create New Sketch on Plane 1.
Draw Ellipse using the following dimensions.
(Click on image to enlarge)
Create New Sketch on the Right Plane.
Draw Ellipse using the following dimensions.
(Click on image to enlarge)
Create New Sketch on the Plane 2.
Draw Ellipse using the following dimensions.
(Click on image to enlarge)
Exit Sketch.
Feature>Lofted Cut.
(Click on image to enlarge)
Features>Linear Pattern.
(Click on image to enlarge)
Finished Part.
(Click on image to enlarge)
Page updated
Report abuse