FAQ's & Guides

HOW TO GUIDES

FAQ'S

Can I book out more than one unit?

To give everyone a chance to take advantage of this incredible benefit, you can reserve a maximum of 1 vehicle at a time, for a total of up to 4 days

If you decide not to use a product, however last minute, please update your booking in the calendar as someone else may take the opportunity to use them.

Can my family / friends use the units?

You are the responsible driver for all products & you must be with the unit at all times.

What riding gear do I need to have?

It is a legal requirement that all riders and passengers are wearing the appropriate Personal Floatation Device (PFD); these are available for you to borrow when you make a booking.

BRP also requires that all riders wear neoprene bottoms.

Other recommended riding gear include;

Goggles
Gloves
Riding Shoes
Neoprene Jacket / Rashie (weather dependant)

HOW TO REFUEL THE UNITS

If refueling in water at a marina - Secure your unit to the dock, turn off the engine, remove the key and all riders (inc passengers) to disembark.
Lift the handlebars on the unit to find the fuel tank
Unscrew the fuel cap
Select PREMIUM 98RON FUEL ONLY. Lower RON fuel may cause engine damage.
The fuel nozzle may need to be raised out of the filler neck in order for the tank to be completely filled.
Once done, securely replace the fuel cap.
Immediately clean off any fuel that may have been spilled during the refuel process.
Turn the unit to accessory and check the fuel indicator is displaying full.

HOW TO FLUSH OUT THE UNITS

Due to the corrosive nature of salt water, it is essential that the units are flushed out after each ride with fresh water to prolong their use and prevent break down. Note: It is important to follow this procedure in this exact order.

Attach the hose (see below)
Start the engine
Turn on the tap
Check that water is running from the back of the unit
Turn the tap of after 30 seconds - do not leave it running for longer as it will cause the seal to burn out!
Rev the accelerator 3 times to flush out the water.
Turn off the engine
Done!

Attach the end of the hose to the unit (found on the rear underside of the unit).

Report abuse