AdvanGo-200

Introduction

AdvanGo is an RFID-based modular solution that identifies faster and with higher reliability all the products a customer wants to buy.

As a result, the payment process it’s accelerated, reducing queues, which improves the customer shopping experience and increases sales.

This system has a special on-board software for confining the reading area, which avoids reading unwanted RFID tags.

It reads the EPC codes of the products being purchased and filtering the results for easy processing by the POS software.

AdvanGo can be used together with AdvanSafe, AdvanMat or AdvanGate to provide a complete loss prevention system fully based on RFID UHF.

It can be used for different types of self checkout:

• • Wall mount

  • Desktop

  • Bag well

  • Basket

AdvanGo comprises:

• • High power RFID reader

  • Antennas

  • RF cables

  • Power supply

  • Specific on-board software

  • AdvanCloud platform (optional)

Getting Started

These are the minimum steps to start using AdvanGo:

Power AdvanGo unit

AdvanGo can be powered by PoE or any superior PoE standard

Connecting to AdvanGo

AdvanGo supports three different connection interfaces:

• 1. TCP/IP

  2. TCP/IP over USB

TCP/IP

The Ethernet interface can be set to static or dynamic (DHCP). DHCP is the default option

TCP/IP over USB

Is it possible to create an ad-hoc point-to-point Ethernet network by using the USB-B connection of the ADRD160, or USB-MicroB of ADRD70

This interface only has one static IP: 192.168.7.2

Follow the instructions here to configure the Host PC to use this interface

Configuration

Almost on any installation, it is required to adjust the AdvanGo operation.

Discover Device

TCP/IP

Configuration requires Ethernet access to the unit, as it uses a web application.

We need therefore to connect the AdvanGo unit to an Ethernet network and execute an IP discovery process. After the configuration process is finished, the Ethernet cable can be removed.

To be able to discover the AdvanGo IP address, use a PC in the same network as the computer.

Please see the discover devices for the 150/60 Series devices: series150/60-Discover-devices.

TCP/IP over USB

Check the USB connection page

Enter AdvanNet Manager

The previous step will result in the IP that is assigned to the device. Let's named it <AdvanGo-IP-address>

1. Use a computer in the same network as the AdvanGo.

2. Open a Web Browser (Chrome or Firefox are required).

3. Go to the page: http://<AdvanGo-IP-address>

4. Replace the <AdvanGo-IP-address> for the IP found in the discover devices.

5. You will see the AdvanNet GUI:

The default configuration should be a good starting point.

Additional information on AdvanNet Manager can be found here.

Read Modes

AdvanGo uses by default the ADVANGO_DYNAMIC mode

Additional information on the AdvanGo operation mode can be found here.

Monitor

An easy way to check if the system is reading is by using the Monitor menu

Advanced configuration

Power and Sensitivity

The power and sensitivity of the AdvanGo its already being set for the best performance but in the RF & Antenna Options tab the sensitivity can be configured for more suitable performance. For more information about it look at this post: What-is-the-difference-between-Power-and-Sensitivity. Remember that if you're using the AdvanGo API is better to configuring the Power using the API.

System features

Access CSV log

All system activity is logged into a CSV file. This file can be accessed at any time:

• • Retrieve CSV log file accessing the URL (HTTP GET request)

http://{device_ip}:3161/system/fs/retrieveFile/AdvanNetCSVS

• The CSV file is retrieved as a compressed file named

  • AdvanNetCSVS.zip

• The CSV file structure is self-explanatory. It contains events of the following type:

  • TAG_READ: a read event of a tag

  • TAG_ADDED: a read that has to be considered for a payment operation

  • TAG_WRITE: a tag write event. Tag write events may be a side-effect of the AdvanGo operation.

Clear CSV log

To clear the internal CSV log file, access the URL (HTTP GET request):

http://{device_ip}:3161/system/fs/removeFile/AdvanNetCSVS

Access real-time data

All system activity can be accessed at real-time by listening at TCP socket port 3177.

The protocol used is very similar to HTTP and the message format is XML. The following is a sample of a message:

ADVANNET/1.1

Content-Length:452

Content-Type:text/xml

<?xml version="1.0" encoding="UTF-8"?>

<deviceEventMessage>

    <type>deviceEventMessage</type>

    <ts>1478216232082</ts>

    <status>OK</status>

    <event>

        <type>TAG_ALARM</type>

        <deviceId>AdvanPay-cf-us-120</deviceId>

        <alarmType>TAG_ADDED</alarmType>

        <epcs>303602c25c09bbe003deb652</epcs>

        <sku>08433815099679</sku>

        <readerPort>1</readerPort>

        <mux1>0</mux1>

        <mux2>0</mux2>

    </event>

    <deviceId>AdvanPay-cf-us-120</deviceId>

</deviceEventMessage>

Important features:

• Header always contains

  • ADVANNET/1.0: protocol version

  • Content-Length: length of the message

  • Content-Type: type of message

• There is an empty line between the headers and the start of the message.

• Line separators are CRLF characters: this applies to header lines and the empty line between headers and content. The content itself (in case of TXT or XML type) may contain any form of line separator.

TAG messages

Possible TAG events that will be received are:

• INVENTORY

<?xml version="1.0" encoding="UTF-8"?>

<inventory>

    <type>inventory</type>

    <ts>1445500793000</ts>

    <status>OK</status>

    <msg-version>2.3.0</msg-version>

    <op>inventory</op>

    <data>

        <advanNetId>AdvanNet-instance-78:a5:04:ed:a8:f2--1</advanNetId>

        <deviceId>AdvanPay-cf-us-120</deviceId>

        <inventory>

            <class>INVENTORY</class>

            <deviceId>AdvanPay-cf-us-120</deviceId>

            <size>1</size>

            <timeWindow>-1</timeWindow>

            <items>

                <item>

                    <class>READ_EVENT</class>

                    <epc>30360000a1360008889d3604</epc>

                    <ts>1445500793789</ts>

                    <deviceId>AdvanPay-cf-us-120</deviceId>

                    <data>

                        <class>TAG_DATA</class>

                        <hexepc>30360000a1360008889d3604</hexepc>

                        <opMode>AdvanPay-cf-us-120.AdvanPay.ADVANPAY_PAYMENT</opMode>

                        <props>

                            <prop>TIME_STAMP:1445500793789</prop>

                            <prop>RF_PHASE:0</prop>

                            <prop>FREQ:866829</prop>

                            <prop>READ_COUNT:1</prop>

                            <prop>RSSI:-50</prop>

                            <prop>ANTENNA_PORT:1</prop>

                        </props>

                    </data>

                    <locationData>

                        <class>LOCATED_TAG_DATA</class>

                        <epc>30360000a1360008889d3604</epc>

                        <antenna>

                            <class>ANTENNA_DEFINITION</class>

                            <def>AdvanPay-cf-us-120,1,0,0,0,antenna1,1,0,0</def>

                        </antenna>

                        <location>

                            <class>LOCATION_DEFINITION</class>

                            <loc>antenna1,1,0,0</loc>

                        </location>

                    </locationData>

                </item>

            </items>

        </inventory>

    </data>

</inventory>

• TAG_ADDED

ADVANNET/1.1

Content-Length:452

Content-Type:text/xml

<?xml version="1.0" encoding="UTF-8"?>

<deviceEventMessage>

    <type>deviceEventMessage</type>

    <ts>1478216232082</ts>

    <status>OK</status>

    <event>

        <type>TAG_ALARM</type>

        <deviceId>AdvanPay-cf-us-120</deviceId>

        <alarmType>TAG_ADDED</alarmType>

        <epcs>303602c25c09bbe003deb652</epcs>

        <sku>08433815099679</sku>

        <readerPort>1</readerPort>

        <mux1>0</mux1>

        <mux2>0</mux2>

    </event>

    <deviceId>AdvanPay-cf-us-120</deviceId>

</deviceEventMessage>

• • DEVICE_ERROR

A common error found when the configured password do not match the tag password:

<?xml version="1.0" encoding="UTF-8"?>

<deviceEventMessage>

    <type>deviceEventMessage</type>

    <ts>1445499839780</ts>

    <status>ERROR</status>

    <event>

        <class>DEV_ERROR_EVENT</class>

        <type>DEVICE_ERROR</type>

        <typeclass>com.keonn.spec.event.DeviceEvent$EventType</typeclass>

        <advanNetId>AdvanNet-instance-78:a5:04:ed:a8:f2--1</advanNetId>

        <deviceId>AdvanPay-cf-us-120</deviceId>

        <errors>

            <error>

                <code>25</code>

                <humanCode>Error[0000040a] Changing EPC pattern in 30360000a1360033331d3604. Error msg: Password seems wrong.</humanCode>

                <ts>1445499839774</ts>

            </error>

        </errors>

    </event>

    <deviceId>AdvanPay-cf-us-120</deviceId>

</deviceEventMessage>

A common error found when the write operation fails. Usual conditions are:

• • The tag does not stay the required time for the write operation

  • The write power is not high enough

<?xml version="1.0" encoding="UTF-8"?>

<deviceEventMessage>

    <type>deviceEventMessage</type>

    <ts>1445499840685</ts>

    <status>ERROR</status>

    <event>

        <class>DEV_ERROR_EVENT</class>

        <type>DEVICE_ERROR</type>

        <typeclass>com.keonn.spec.event.DeviceEvent$EventType</typeclass>

        <advanNetId>AdvanNet-instance-78:a5:04:ed:a8:f2--1</advanNetId>

        <deviceId>AdvanPay-cf-us-120</deviceId>

        <errors>

            <error>

                <code>25</code>

                <humanCode>Error[00000400] Changing EPC pattern in 30360000a1360033331d3604. Error msg: No tags found.</humanCode>

                <ts>1445499840683</ts>

            </error>

        </errors>

    </event>

    <deviceId>AdvanPay-cf-us-120</deviceId>

</deviceEventMessage>

SYSTEM messages

Possible SYSTEM events that will be received are:

• • ADVANNET_INFO

<?xml version="1.0" encoding="UTF-8"?>

<eventMessage>

    <type>eventMessage</type>

    <ts>1409827170979</ts>

    <status>OK</status>

    <event>

        <class>com.keonn.advannet.impl.event.DefaultAdvanNetEvent</class>

        <type>ADVANNET_INFO</type>

        <typeclass>com.keonn.spec.event.AdvanNetEvent$AdvanNetEventType</typeclass>

        <advanNetId>AdvanNet-instance-00:1e:8c:25:0c:43--1</advanNetId>

        <deviceId>AdvanPay-cf-us-120</deviceId>

        <msg>Device[AdvanPay-cf-us-120] started in mode: EPC_EAS_ALARM</msg>

    </event>

</eventMessage>

• • ADVANNET_DEVICE_CONNECTED

<?xml version="1.0" encoding="UTF-8"?>

<eventMessage>

    <type>eventMessage</type>

    <ts>1398285635331</ts>

    <status>OK</status>

    <event>

        <class>com.keonn.advannet.impl.event.DefaultAdvanNetEvent</class>

        <type>ADVANNET_DEVICE_CONNECTED</type>

        <typeclass>com.keonn.spec.event.AdvanNetEvent$AdvanNetEventType</typeclass>

        <advanNetId>AdvanNet-instance-7c:66:9d:55:60:df--1</advanNetId>

        <deviceId>AdvanPay-cf-us-120</deviceId>

    </event>

</eventMessage>

• • ADVANNET_DEVICE_DISCONNECTED

<?xml version="1.0" encoding="UTF-8"?>

<eventMessage>

    <type>eventMessage</type>

    <ts>1398285635331</ts>

    <status>OK</status>

    <event>

        <class>com.keonn.advannet.impl.event.DefaultAdvanNetEvent</class>

        <type>ADVANNET_DEVICE_DISCONNECTED</type>

        <typeclass>com.keonn.spec.event.AdvanNetEvent$AdvanNetEventType</typeclass>

        <advanNetId>AdvanNet-instance-7c:66:9d:55:60:df--1</advanNetId>

        <deviceId>AdvanPay-cf-us-120</deviceId>

    </event>

</eventMessage>

• • Also several error messages can be received.

Reset settings to default

It is possible to reset the system to factory defaults. That means:

• Any network settings are removed and the system is reverted to use DHCP

• Any persisted operation settings (AdvanNet settings) are removed

The procedure is as follows:

• Power Up the system

• Get into AdvanNet -> Dasboard Tab

• Go to Reset options on top right of the Dashboard Tab

• Select facotry Reset

Integration

We have a dedicated page on how to integrate our AdvanGo system with your POS system here:

Integration

Latest Firmware

You can always download and install the latest Firmware from here

https://wiki.keonn.com/rfid-components/reader-upgrade/update-advannet-procedure

Downloads

Find the User Guide and other downloadable content below: