ACM6000T
ACM6000T Automatic Calibration Kit
ACM6000T is an Automatic Calibration Module (ACM) designed for full one-port and two-port calibrations of vector network analyzers from Copper Mountain Technologies. It operates in the frequency range from 300 kHz to 6 GHz.
ACM6000T is an Automatic Calibration Module (ACM) designed for full one-port and two-port calibrations of vector network analyzers from Copper Mountain Technologies. It operates in the frequency range from 300 kHz to 6 GHz.
For lower frequencies, the ACM6000T operates up to 6 GHz.
For lower frequencies, the ACM6000T operates up to 6 GHz.
ACM6000T calibrates any CMT VNA in fully automatic mode through the built-in functions of the analyzer software. ACM6000T switches to the impedance states one by one in the process of calibration. The VNA calibration coefficients are calculated using the measured S-parameters of the ACM impedance states and the data stored in the ACM6000T memory.
ACM6000T calibrates any CMT VNA in fully automatic mode through the built-in functions of the analyzer software. ACM6000T switches to the impedance states one by one in the process of calibration. The VNA calibration coefficients are calculated using the measured S-parameters of the ACM impedance states and the data stored in the ACM6000T memory.
Advantages of Automatic Calibration
The ACM6000T calibration offers the following advantages over traditional mechanical SOLT calibration:
Reduced number of connections (for example, full two-port calibration requires only one connection of the ACM to a VNA instead of 7 connections of mechanical standards)
Faster calibration procedure
Reduced risk of human error
Higher accuracy
Reduced wear on test port connectors
The
ACM6000T contains two RF connectors for connection to VNA test ports, Mini-USB control port, several different transmission and reflection impedance states and electronic changeover switches. ACM6000T has six reflection states (three for each port) and a Thru, and ACM6000T has ten reflection states (five for each port) and a Thru. The precise S-parameters of the calibration impedance states are stored in the ACM6000T memory (factory characterization data).
ACM6000T contains two RF connectors for connection to VNA test ports, Mini-USB control port, several different transmission and reflection impedance states and electronic changeover switches. ACM6000T has six reflection states (three for each port) and a Thru, and ACM6000T has ten reflection states (five for each port) and a Thru. The precise S-parameters of the calibration impedance states are stored in the ACM6000T memory (factory characterization data).
Basic configuration options for ACM6000T are below. For more information on ACM6000T configurations and specifications, please see the data sheet at right.
Basic configuration options for ACM6000T are below. For more information on ACM6000T configurations and specifications, please see the data sheet at right.
ACM6000T (300 kHz to 6 GHz):
N-Type M-F
N-Type F-F
3.5mm M-F
3.5mm F-F
Because the ACM6000T comes in multiple configurations and connectors, we advise you to talk to us to see which one is best for your application.
Support Vector Network Analyzers
Support Vector Network Analyzers
808/1
804/1
304/1
R140
R54
S5048
S7530
TR5048
TR7530
TR1300/1
PLANAR ACM6000T 文件下載
PLANAR ACM6000T 文件下載