MOULD X
MOULD X
Embedded Files
PRODUCT VARIANT
PRODUCT VARIANT
Mould X (Oil-Based)
Mould X (Oil-Based)
Mould X (Water-Based)
Mould X (Water-Based)
PRODUCTS ADVANTAGE
PRODUCTS ADVANTAGE
- Ensures effective and clean release from aluminium formwork.
- Reduces labour costs, cleaning time, and risk of surface damage.
- Produces a smooth, stain-free, high-quality concrete finish.
- Protects aluminium formwork, extending its service life.
- Provides consistent and improved results with continued use.
AREAS OF APPLICATION
AREAS OF APPLICATION
- Steel, aluminium, timber, and plastic formwork
- Precast concrete elements
- On-site casting and moulding works
- Architectural or exposed concrete finishes
METHOD OF STATEMENT
METHOD OF STATEMENT
- Surface Preparation:
Ensure all formwork surfaces are clean, dry, and free from previous release agent residues, oil, or debris. - Mixing:
If slight separation occurs due to prolonged storage, stir gently until uniform consistency is restored. This is normal for water-based formulations. - Application:
Apply Mould X using a low-pressure sprayer, brush, or clean cloth in a thin, even film. Avoid over-application or puddling. - Drying:
Allow the coating to dry before placing reinforcement or pouring concrete. - Reapplication:
Untreated or highly absorbent surfaces (especially new timber formwork) may require a second coat for best results.
COVERAGE EFFICIENCY
COVERAGE EFFICIENCY
Approximately 15–18 m² per litre, depending on surface porosity, texture, and roughness.
Approximately 15–18 m² per litre, depending on surface porosity, texture, and roughness.
PACKAGING & SHELF LIFE
PACKAGING & SHELF LIFE
Packaging: 200 L / drum
Packaging: 200 L / drum
Shelf Life: 3 months (unopened, stored under recommended conditions)
Shelf Life: 3 months (unopened, stored under recommended conditions)
PRECAUTIONS
PRECAUTIONS
- Conduct a small-scale trial before large-scale application to verify compatibility with formwork material and desired surface finish.
- Separation during storage is normal; simply stir to rehomogenize before use.
- Avoid excessive application, which may affect concrete surface quality.
The information, and, in particular, the recommendations relating to the application and end-use of W&H products, are given in good faith based on W&H's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with W&H’s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. W&H reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Page updated
Google Sites
Report abuse