A-PLAS
A-PLAS
Embedded Files
PRODUCT VARIANT
PRODUCT VARIANT
11T
11T
11U
11U
12L
12L
14M
14M
A-Plas Mortar Additive is a high-performance polymer admixture specially formulated to enhance the bonding strength, flexibility, and workability of cement mortars. It is designed for use in plastering, rendering, masonry work, and tile bedding applications. A-Plas improves adhesion to various substrates, reduces surface cracking, and increases overall durability of the finished surface.
A-Plas Mortar Additive is a high-performance polymer admixture specially formulated to enhance the bonding strength, flexibility, and workability of cement mortars. It is designed for use in plastering, rendering, masonry work, and tile bedding applications. A-Plas improves adhesion to various substrates, reduces surface cracking, and increases overall durability of the finished surface.
PRODUCT ADVANTAGES
PRODUCT ADVANTAGES
AREAS OF APPLICATION
AREAS OF APPLICATION
- Internal and external plastering works
- Bricklaying and block jointing
- Tile fixing and bedding mortar
- Rendering on concrete or precast surfaces
RECOMMENDED MIXING RATION (PER BATCH)
RECOMMENDED MIXING RATION (PER BATCH)
METHOD OF STATEMENT
METHOD OF STATEMENT
- Pour 30 L of clean water into the concrete mixer.
- Add 100 g of A-Plas Mortar Additive and stir until fully dissolved.
- Gradually add 50 kg of Ordinary Portland Cement and 250 kg of fine sand while mixing thoroughly.
- Ensure the mortar is uniform and smooth before application.
The information, and, in particular, the recommendations relating to the application and end-use of W&H products, are given in good faith based on W&H's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with W&H’s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. W&H reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Page updated
Google Sites
Report abuse