SUBFRAME  HARDWARE LIST * UPDATED 8.17.23 *

MCM SUBFRAME HARDWARE LIST (# FROM BOLT DEPOT):

Product#:                           Description:                                Quantity:                Location:

#811 - Hex bolts, Zinc plated grade 8 steel yellow, 3/4"-16 x 5" Quantity (2) TOP SUBFRAME

#3054 - SAE flat washers, Zinc plated grade 8 steel yellow, 3/4" Quantity (2) TOP SUBFRAME

#6273 - Metric hex bolts, Zinc plated class 8.8 steel, 12mm x 1.75mm x 140mm Quantity (2) L & R ENGINE MOUNTS

#4790 - Metric hex nuts, Zinc plated class 8.8 steel, 12mm x 1.75mm Quantity (2) L & R ENGINE MOUNTS

#4829 - Metric lock washers, Zinc plated steel, 12mm Quantity (2) L & R ENGINE MOUNTS

#4531 - Metric flat washers, Zinc plated steel, 12mm Quantity (12) L & R ENGINE MOUNTS

#648 - Hex bolts, Zinc plated grade 8 steel yellow, 1/2"-13 x 3" Quantity (2) LOWER ARMS

#2586 - Hex nuts, Zinc plated grade 8 steel yellow, 1/2"-13 Quantity (8) LOWER ARMS

#3064 - USS flat washers, Zinc plated grade 8 steel yellow, 1/2" Quantity (4) LOWER ARMS

#3041 - Lock washers, Zinc plated grade 8 steel yellow, 1/2" Quantity (4) LOWER ARMS

#7275 - Metric hex bolts, Zinc plated class 8.8 steel, 14mm x 1.5mm x 100mm Quantity (1) REAR STEADY

#6227 - Metric hex bolts, Zinc plated class 8.8 steel, 8mm x 1.25mm x 55mm Quantity (1) REAR STEADY

#6879 - Metric hex nuts, Zinc plated class 8.8 steel, 14mm x 1.5mm Quantity (1) REAR STEADY

#4788 - Metric hex nuts, Zinc plated class 8.8 steel, 8mm x 1.25mm Quantity (1) REAR STEADY

#4532 - Metric flat washers, Zinc plated steel, 14mm Quantity (2) REAR STEADY

#4830 - Metric lock washers, Zinc plated steel, 14mm Quantity (1) REAR STEADY

#4827 - Metric lock washers, Zinc plated steel, 8mm Quantity (1) REAR STEADY

#4529 - Metric flat washers, Zinc plated steel, 8mm Quantity (2) REAR STEADY

#600 - Hex bolts, Zinc plated grade 8 steel yellow, 5/16"-18 x 1-1/4" Quantity (4) FLOOR HARDWARE

#2583 - Hex nuts, Zinc plated grade 8 steel yellow, 5/16"-18 Quantity (4) FLOOR HARDWARE

#3061 USS flat washers, Zinc plated grade 8 steel yellow, 5/16" Quantity (8) FLOOR HARDWARE

#3038 Lock washers, Zinc plated grade 8 steel yellow, 5/16" Quantity (4) FLOOR HARDWARE

Here is a list of additional Supporting Products/Parts we use on our Honda Conversion Builds:

Engine:

1992-2000, d15/d16 with Hydro Transmission.

OEM headgasket we always use. Cometic is nice to get the .018 headgasket to give more compression, but extremely hard to get for the past year.

Transmission:

Contact David Ruiz, parts@synchrotechtrans.com

C9600-425 type 2 w 3.72 final drive, mfactory lsd, carbon synchros 

David Ruiz

Synchrotech Transmissions

909-592-5900

Computer / ECU:

P28 Hondata S300 V3 if its in your budget, otherwise a chipped P28 will do, just not as user friendly and easy to diagnose

Suspension:

Minisport Adjustable Lower Arms - Heavy Duty

https://usa.minisport.com/spdsp431a-heavy-duty-adjustable-mini-bottom-suspension-arms.html

Poly Lower Arm Bush Kit - Red Set of 4

https://usa.minisport.com/spdsp657-poly-mini-suspension-bottom-arm-bush-kit-red-set-of-4.html

Mini Sport Adjustable Tie Rods pair

https://usa.minisport.com/c-8g4249-mini-sport-adjustable-front-suspension-tie-rod-pair.html

Uprated Rubber Tie Rod Bush Kit set 4

https://usa.minisport.com/c-str628-uprated-rubber-mini-suspension-tie-rod-bush-kit-set-4.html

Mini Front tie bar fitting kit

https://usa.minisport.com/mini-front-tie-bar-fitting-kit.html

Intake:

LHD MINI SPI Throttle Cable (Regardless if your mini is RHD or LHD), lots of places to get them from, but like this:

https://www.minisport.com/sbb10186-throttle-cable-spi-lhd-1992-95.html

Skunk 2 66mm Alpha throttle body:

https://www.amazon.com/Skunk2-309-05-1030-Alpha-Throttle-Body/dp/B008M5ISEU

SENSORS:

We buy a new TPS, MAP, IAT, IACV, and upstream 02 sensor. All earlier obd1 stuff to accommodate the obd1 standalone harness.

FUEL:

Fuel Tank:

MPI with MPI Pump assembly, the feed/return are 5/16". So we usually run 5/16" out of that with soft lines to 3/8" hard lines underneath with 6an couplers to 5/16" barb on rear. 6an on the front.

MPI pump is sufficient to run the D16, SPI pump is not. You can also run Walbo 190lph or 255lph if you want.

Fuel Injectors:

Stock is fine

https://www.ebay.com/itm/253238148885

 Fuel Rail:

https://www.ebay.com/itm/324669735018

 Fuel Pressure Regulator:

Something like this:

https://www.ebay.com/itm/265068002860

Cooling:

 This is the radiator we use:

https://www.ebay.com/itm/152617223165

 Mishimoto fan is fantastic:

https://www.ebay.com/itm/324064461762

 80c fan switch would def be recommended in Florida:

https://www.ebay.com/itm/324064461630

 I usually buy this hose set:

https://www.ebay.com/itm/273379725476

RADIATOR TOP BRACKET MOUNT WE USE:

https://www.ebay.com/itm/133747629391

Steering:

We recommend using either KAD steering limiters, or ideally a new sportpack steering rack.