News
18/12/2023
Our manuscript, entitled "BENDING ANALYSIS OF FGSP NANOPLATE RESTING ON ELASTIC FOUNDATION BY USING NONLOCAL QUASI-3D THEORY", has been accepted for publication in Thin-Walled Structures, Elsevier, ISI, IF=6.4, Q1
08/07/2023
Our manuscript, entitled "Multi-Objective Optimization based on Machine Learning and Non-dominated Sorting Genetic Algorithm for Surface Roughness and Tool Wear in Ti6Al4V Turning", has been accepted for publication in Machining Science and Technology, Taylor and Francis Publications, ISI, IF=2.154, Q1
21/04/2023
Our manuscript, entitled "Optimization of Neural Network Architecture and Derivation of Closed-Form Equation to Predict Ultimate Load of Functionally Graded Material Plate", has been accepted for publication in Advances in Mechanical Engineering, Sage Publications, ISI, IF=1.566, Q3
20/03/2023
Our manuscript, entitled "Optimal Design of Circular Concrete-Filled Steel Tubular Columns based on a Combination of Artificial Neural Network, Balancing Composite Motion Algorithm and a Large Experimental Database", has been accepted for publication in Expert Systems With Applications, Elsevier, ISI, IF=8.665, Q1
01/02/2023
Our manuscript, entitled "A Hybridization of Machine Learning and NSGA-II for Multi-Objective Optimization of Surface Roughness and Cutting Force in ANSI 4340 Alloy Steel Turning", has been accepted for publication in Journal of Machine Engineering, ESCI, Q2
21/12/2022
Our manuscript, entitled "Predicting Volumetric Error Compensation for Five-axis Machine Tool Using Machine Learning", has been accepted for publication in International Journal of Computer Integrated Manufacturing, Taylor & Francis, ISI, IF=4.42, Q1
02/12/2022
Dr. Tien-Thinh Le has participated to the "The 5th International Conference on Engineering Research and Applications – ICERA 2022", Thai Nguyen, Vietnam, with two presentations: "Discrete Element Modeling based Determination of Shear Behavior in a Granular Medium through Displacement Field" and "Balancing Composite Motion Optimization and Artificial Neural Network for the Prediction of Critical Load of Concrete-filled Steel Tubes under Axial Compression"
12/11/2022
Dr. Tien-Thinh Le has participated to the "the Third International Conference on Material, Machines and Methods for Sustainable Development - MMMS2022", Can Tho, Vietnam, with two poster presentations: "Prediction Model for Surface Roughness of Polycarbonate using Single-Point-Diamond-Turning Lathe Machining based on Machine Learning Techniques", "Predicting of Roughness of Surface Texture in Ball End Tool Milling Aluminum using Machine Learning" and "Optimization of Process Parameter in High-Speed Milling AA6061 Using SVR and NSGA-II"
25/10/2022
Our manuscript, entitled "Practical Machine Learning Application for Predicting Axial Capacity of Composite Concrete-Filled Steel Tube Columns considering Effect of Cross-sectional Shapes", has been accepted for publication in International Journal of Steel Structures, Springer, ISI, IF=1.54, Q2
23/10/2022
Our manuscript, entitled "Prediction Model for Surface Roughness of Polycarbonate using Single-Point-Diamond-Turning Lathe Machining based on Machine Learning Techniques", has been accepted for publication in Lecture Notes in Mechanical Engineering, Scopus
23/10/2022
Our manuscript, entitled "Surface Roughness Prediction in Ball End Milling of AA6061 by Various Machine Learning Algorithms", has been accepted for publication in Lecture Notes in Mechanical Engineering, Scopus
23/10/2022
Our manuscript, entitled "Optimization of Process Parameter in High-Speed Milling AA6061 Using SVR and NSGA-II", has been accepted for publication in Lecture Notes in Mechanical Engineering, Scopus
06/09/2022
Dr. Tien-Thinh Le, Dr. Quan Tran Quoc and Dr. Van-Hai Nguyen have been awarded Phenikaa University grant for "Investigation of mechanical behaviors of composite structural members under compression by finite element method and machine learning".
31/08/2022
Our manuscript, entitled "Balancing Composite Motion Optimization and Artificial Neural Network for the Prediction of Critical Load of Concrete-filled Steel Tubes under Axial Compression", has been accepted for publication in Lecture notes in networks and systems, Scopus (presentation at the 4th International Conference on Engineering Research and Applications - ICERA 2022)
22/07/2022
Dr. Tien-Thinh Le has presented "Computation of drad coefficient of discrete particles. Application for research and development of agricultural machinery" at the 15th National conference on fluid mechanics, organized by VIETNAM ASSOCIATION FOR FLUID MECHANICS
28/06/2022
Our manuscript, entitled "Correlating the unconfined compressive strength of rock with the compressional wave velocity effective porosity and Schmidt hammer rebound number using artificial neural networks", has been accepted for publication in Rock Mechanics and Rock Engineering, Springer, ISI, IF=6.73, Q1
05/05/2022
Our manuscript, entitled "Multi-Objective Optimization of Surface Roughness and Tool Wear in High-Speed Milling by Machine Learning and NSGA-II", has been accepted for publication in Advances in Materials Science and Engineering, Hindawi, ISI, IF=1.726, Q2
22/04/2022
Our manuscript, entitled "Design and Manufacture a Microbial Fertilizer Machine for Vegetable Production", has been accepted for publication in Journal of Rural Industry, Vietnam Society of Agricultural Engineering
13/04/2022
Dr. Van-Hai Nguyen and Dr. Tien-Thinh Le have been awarded Phenikaa University grant for "Geometry error prediction and compensation for CNC machining tools".
07/04/2022
Dr. Tien-Thinh Le and Dr. Nguyen Van Hai have visited Faculty of Mechanical Engineering, Hanoi University of Industry, for a potential research collaboration. A special thanks to Dr. Nguyen Anh Tu for the faculty tour and discussion.
01/04/2022
Welcome MSc. Nguyen Thi Hanh Nguyen joining the team as a PhD student. The subject of the research: Identification of main working parameters for sorting equipment in a 5.5 ton/h carrot processing line. Altair EDEM discrete element simulations will be used for simulating the sorting process.
20/03/2022
Our manuscript, entitled "Adaptive-Neuro-Fuzzy-Inference-System Model for Prediction of Ultimate Load of Rectangular Concrete-Filled Steel Tubular Columns", has been accepted for publication in Journal of Intelligent & Fuzzy Systems, IOS Press, ISI, IF = 1.739, Q2
01/03/2022
Congratulations to Le Thanh Hai for successfully defending his PhD thesis on Post-buckling Response of Functionally Graded Porous Plates at National University of Civil Engineering, Hanoi, Vietnam
10/01/2022
Our manuscript, entitled "Calibration of a Stress-Strain Response for Geopolymer Concrete under Axial Compressive Load", has been accepted for publication in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE, ISI, IF = 2.311, Q2
17/12/2021
Dr. Tien-Thinh Le and Dr. Van-Hai Nguyen have presented respectively "Development and identification of working parameters for threshing unit of peanut tuber picking machine" and "Developing Geometric Error Compensation Software for Fiveaxis CNC Machine Tool on NC program based on Artificial Neural Network" at Asian MMS 2021, The 6th IFToMM Asian Mechanisms and Machine Science Conference December 15-18, 2021. Hanoi, Vietnam, organized by Hanoi University of Science and Technology. The two papers have been published in the Proceeding of the Conference. Photo of the day!
02/12/2021
On behalf of the team, Dr. Minh Vuong Le has presented "Prediction Model for Tensile Modulus of Carbon Nanotube–Polymer Composites" and "Critical Buckling Load Evaluation of Functionally Graded Material Plate Using Gaussian Process Regression" at The 4th International Conference on Engineering Research and Applications 2021, organized by Thai Nguyen University of Technology. The two papers have been published in the Proceeding of the Conference. Photo of the day!
30/11/2021
Welcome Mr. Le Thanh, Technical Manager at Altair, to Faculty of Mechanical Engineering and Mechatronics, Phenikaa University. A special thanks for the discussion and a potential collaboration in the near future.
13/10/2021
Our patent, entitled "EP3892079 - METHOD FOR ADJUSTING A CENTRIFUGAL PARTICLE SPREADER AND CENTRIFUGAL PARTICLE SPREADER", has been published by the European Patent Office
10/10/2021
Our patent, entitled "FR3109054 - Procédé de réglage d’un épandeur centrifuge de particules et épandeur centrifuge de particules", has been published by the French Patent Office
25/09/2021
Our manuscript, entitled "Evaluation of the ultimate eccentric load of rectangular CFSTs using advanced neural network modeling", has been accepted for publication in Engineering Structures, Elsevier, ISI, IF = 4.471, Q1
24/09/2021
Dr. Tien-Thinh Le has presented "Influence of surface effect on the macroscopic properties of nanocomposite materials from a probabilistic standpoint" and "Virtual testing of polymer nanocomposites and identification of interphase zone using Molecular Dynamics simulation" at The 15th National Conference on Solid Mechanics, organized by Vietnam Society of Solid Mechanics and Thai Nguyen University of Technology. The two papers have been published in the Proceeding of the Conference. Photo of the day!
20/09/2021
Our manuscript, entitled "Investigation of Force Transmission, Critical Breakage Force and Relationship between Micro-Macroscopic Behaviors of Agricultural Granular Material in a Uniaxial Compaction Test using Discrete Element Method", has been accepted for publication in Particulate Science and Technology, Taylor & Francis publisher, ISI, IF = 2.356, Q2
11/09/2021
Our manuscript, entitled "Critical Buckling Load Evaluation of Functionally Graded Material Plate Using Gaussian Process Regression", has been accepted for publication in Lecture Notes in Networks and Systems, Springer publisher, Scopus, and also for a communication at the 4th International Conference on Engineering Research and Applications – ICERA 2021
10/09/2021
Our manuscript, entitled "Influence of surface effect on the effective properties of nanocomposite materials from a probabilistic standpoint", has been accepted for publication and oral presentation at the 15th National Conference on Solid Mechanics, organized by Vietnam Society of Solid Mechanics
10/09/2021
Our manuscript, entitled "Virtual testing of polymer nanocomposites and identification of interphase zone using Molecular Dynamics simulation", has been accepted for publication and oral presentation at the 15th National Conference on Solid Mechanics, organized by Vietnam Society of Solid Mechanics
02/09/2021
Our manuscript, entitled "Prediction Model for Tensile Modulus of Carbon Nanotube–Polymer Composites", has been accepted for publication in Lecture Notes in Networks and Systems, Springer publisher, Scopus, and also for a communication at the 4th International Conference on Engineering Research and Applications – ICERA 2021
21/08/2021
Dr. Tien-Thinh Le has joined Mechanical and structural analysis Webinar, organized by Prof. Tran Minh Tu (National University of Civil Engineering) and Prof. Thai Duc Kien (Sejong University)
15/08/2021
Our manuscript, entitled "Development of Artificial Intelligence based Model for the Prediction of Young’s Modulus of Polymer/Carbon-Nanotubes Composites", has been accepted for publication in Mechanics of Advanced Materials and Structures, Taylor & Francis publisher, ISI, IF = 4.030, Q1
29/07/2021
Our Special Collection on Interface Effects and Size-Dependent Behavior of Nanocomposites has been set up in Advances in Mechanical Engineering, ISI, IF=1.316. Your contributions are welcome. Link
21/06/2021
Our manuscript, entitled "Prediction of Axial Load Capacity of Rectangular Concrete-filled Steel Tube Columns using Machine Learning Techniques", has been accepted for publication in Engineering with Computers, Springer publisher, ISI, IF = 3.938, Q1
19/06/2021
The official website of Mechanics of Materials/Structures and Applications (MMSA) Research group has been launched:
09/06/2021
Our manuscript, entitled "Applying Bayesian Optimization for Machine Learning Models in Predicting the Surface Roughness in Single-Point Diamond Turning Polycarbonate", has been accepted for publication in Mathematical Problems in Engineering, Hindawi publisher, ISI, IF = 1, Q2
20/05/2021
Our manuscript, entitled "Soft computing based closed form equations correlating L and N-type Schmidt hammer rebound numbers of rocks", has been accepted for publication in Transportation Geotechnics, Elsevier publisher, ISI, IF = 2.436, Q1
14/05/2021
Our manuscript, entitled "Numerical Prediction Model for Ultimate Load of Rectangular Concrete-filled Steel Tubes Members", has been accepted for publication in "Tạp chí Giao thông vận tải - Cơ quan thông tin lý luận khoa học của Bộ Giao thông vận tải"
07/04/2021
Dr. Tien-Thinh Le and Dr. Nguyen Van Hai have visited Faculty of Mechanical Engineering, University of Economics - Technology for Industries (UNETI), Ha Noi. A special thanks to Dr. Quang, Dr. Tuan and other colleagues for the nice discussion.
05/04/2021
Conducting experiments on buckling behavior of columns at Department of Engineering Mechanics, Faculty of Engineering, Vietnam National University of Agriculture. A special thanks to Dr. Nguyen Chung Thong for the support.
02/04/2021
Dr. Tien-Thinh Le and Dr. Nguyen Van Tuan have worked at Hung Phat company, Gia Lam, Ha Noi, for the development and improvement of mechanical equipment in the production line. A special thanks to Mr. Quyn and Mr. Trung for the factory tour and discussion.
01/04/2021
Welcome MSc. Nguyen Thi Hanh Nguyen joining as a research assistant. The subject of the research: Simulation of dynamic behavior and interaction between discrete systems and structures using the Discrete Element Modeling method
13/03/2021
Our manuscript, entitled "Development of Deep Learning Model for the Recognition of Cracks on Concrete Surfaces", has been accepted for publication in Applied Computational Intelligence and Soft Computing, Hindawi publisher, SCOPUS
01/03/2021
Our manuscript, entitled "Nanoscale Effect Investigation for Effective Bulk Modulus of Particulate Polymer Nanocomposites using Micromechanical Framework", has been accepted for publication in Advances in Materials Science and Engineering, Hindawi publisher, ISI, IF = 1.271, Q2
23/02/2021
Our manuscript, entitled "An Empirical Model for Bidirectional Bending Capacity of Defected Pipe Combined with Axial Load", has been accepted for publication in International Journal of Pressure Vessels and Piping, Elsevier publisher, ISI, IF = 2.230, Q1
17/02/2021
Our manuscript, entitled "Effects of variability in experimental database on machine-learning-based prediction of ultimate load of circular concrete-filled steel tubes", has been accepted for publication in Measurement, Elsevier publisher, ISI, IF = 3.364, Q1
24/01/2021
Phenikaa Campus Tour 2021. Welcome to the Faculty of Mechanical Engineering and Mechatronics. Photos of the day: Link
20/01/2021
Our manuscript, entitled "Development of User-Friendly Kernel-based Gaussian Process Regression Model for Prediction of Load-Bearing Capacity of Square Concrete-Filled Steel Tubular Members", has been accepted for publication in Materials and Structures, Springer publisher, ISI, IF = 2.90, Q1
28/12/2020
Dr. Tien-Thinh Le has presented "Prediction of Tensile Strength of Polymer Carbon Nanotube Composites Using Practical Machine Learning Method" at the Faculty of Mechanical Engineering and Mechatronics, Phenikaa University. A special thanks to Prof. Tran Vinh Hung and Dr. Nguyen Duc Nam for the discussion and also a potential collaboration in the near future.
25/12/2020
Dr. Tien-Thinh Le and his team have been awarded Phenikaa University grant for "Development of a numerical model predicting the mechanical behavior of nano-reinforced polymer-based materials".
25/12/2020
Dr. Tien-Thinh Le, Dr. Nguyen Van Hai and Dr. Phan Duc Anh, have visited Vicostone company, Hoa Lac, Ha Noi, for a potential development of anti-UV epoxy resin matrix. A special thanks to Dr. Pham Anh Tuan for the factory tour and discussion.
24/12/2020
Dr. Tien-Thinh Le and his team have defended their 2021-2023 research project in front of Phenikaa University committee. A special thanks to Prof. Vu Van Truong and Prof. Nguyen Phu Khanh for the review of the project, and also other members of the committee.
22/12/2020
Dr. Tien-Thinh Le and Dr. Nguyen Van Tuan have visited Hung Phat company, Gia Lam, Ha Noi, for a potential development and improvement of mechanical equipment in a series of production line. A special thanks to Mr. Truong Quang Trung for the factory tour and discussion.
21/12/2020
Welcome Dr. Hoang Duc Bang, CEO of AIE Vietnam and his team, to Phenikaa University. A special thanks for the discussion about GOM's ARAMIS system (based on Digital Image Correlation measuring technique) and a potential collaboration in the near future.
18/12/2020
Welcome undergraduate students Nguyen Thao Nguyen and Bui Anh Tuan joining Undergraduate research internship. The subject of the internship: Estimation of axial capacity of concrete filled steel tubular columns
17/12/2020
Welcome Prof. Tran Minh Tu and his team, to Phenikaa University (Prof. Tran Minh Tu is Head of Strength of Materials Department, Vice Dean of Building and Industrial Construction Faculty, National University of Civil Engineering, Hanoi, Vietnam). A special thanks for the interesting discussion during the seminar. Photos of the seminar: Link
15/12/2020
Memorandum of Understanding signing ceremony between Faculty of Mechanical Engineering & Mechatronics and JCT Vietnam. A special thanks to Mr Nguyen Dinh Cuong and Mr Le Duc Thanh. Photos of the ceremony: Link
07/12/2020
Our manuscript, entitled "Prediction of Ultimate Load of Rectangular CFST Columns using Interpretable Machine Learning Method", has been accepted for publication in Advances in Civil Engineering, Hindawi publisher, ISI, IF = 1.176, Q3
20/11/2020
Dr. Tien-Thinh Le has attended the "WORKSHOP ON COMPUTATION AND DATA ANALYSIS", organized by Phenikka Institute of Advanced Study – PIAS, Phenikaa University, Hanoi, Vietnam. The communication was about " Virtual testing of polymer nanocomposites and identification of interphase zone using Molecular Dynamics simulation".
19/11/2020
Our manuscript, entitled "Multiscale analysis of elastic properties of nano-reinforced materials exhibiting surface effects. Application for determination of effective shear modulus", has been accepted for publication in Journal of Composites Science, MDPI publisher, Emerging Sources Citation Index / Web of Science (Clarivate)
29/10/2020
Opening ceremony of the new academic year, Phenikaa University. Gallery of the ceremony Link
23/10/2020
Faculty of Mechanical Engineering and Mechatronics, Phenikaa University, has organized Career-oriented and R&D Workshop for K13 and K14 undergraduate students. A special thanks to Mr. Nguyen Dinh Cuong, JCT Viet Nam, who has given a passionate talk to our students. Gallery of the Workshop Link
17/10/2020
Our manuscript, entitled "Practical Machine Learning-based Prediction Model for Axial Capacity of Square CFST Columns", has been accepted for publication in Mechanics of Advanced Materials and Structures, Taylor & Francis publisher, ISI, IF = 3.52, Q1
06/10/2020
Our manuscript, entitled "Practical Hybrid Machine Learning Approach for Estimation of Ultimate Load of Elliptical Concrete-Filled Steel Tubular Columns under Axial Loading", has been accepted for publication in Advances in Civil Engineering, Hindawi publisher, ISI, IF = 1.176, Q3
22/09/2020
Our manuscript, entitled "Probabilistic investigation of the effect of stochastic imperfect interfaces in nanocomposites", has been accepted for publication in Mechanics of Materials, Elsevier publisher, ISI, IF = 2.993, Q1
21/09/2020
Our communication, entitled "Random field modeling of inclusion-matrix interphase in nano-reinforced heterogeneous materials", has been accepted for presentation in International Conference on Modern Mechanics and Applications ICOMMA 2020 Link of conference
19/09/2020
Our communication, entitled "Practical Machine Learning-based Graphical User Interface for Prediction of Mechanical Properties of Polymer/Carbon Nanotube Nanocomposites", has been accepted for presentation in International Conference on Modern Mechanics and Applications ICOMMA 2020 Link of conference
16/09/2020
Our Special Issue "Multiscale Analysis of Polymer Nanocomposites" has been set up in Journal of Composites Science (ESCI) Link of SI
03/09/2020
Our manuscript, entitled "Optimization Design of Rectangular Concrete-filled Steel Tube Short Columns with Balancing Composite Motion Optimization and Data-driven Model", has been accepted for publication in Structures, Elsevier publisher, ISI, IF = 1.839, Q1
01/09/2020
Dr. Tien-Thinh Le has joined Faculty of Mechanical Engineering and Mechatronics, Phenikaa University Link
07/08/2020
Our manuscript, entitled "Prediction of Tensile Strength of Polymer Carbon Nanotube Composites using Practical Machine Learning Method", has been accepted for publication in Journal of Composite Materials, SAGE publisher, ISI, IF = 1.97, Q2
03/08/2020
Our manuscript, entitled "Probabilistic modeling of surface effects in nano-reinforced materials", has been accepted for publication in Computational Materials Science, Elsevier publisher, ISI, IF = 2.86, Q1
20/07/2020
Our manuscript, entitled "Elastic deformation of amorphous polyethylene in uniaxial tensile test by using Molecular Dynamics simulation", has been accepted for publication in Computer Methods in Materials Science, Q3