Embedded Files
Lessons 1 - 4
1 - Angle Spacer
Layout
Model Space
2 - Base Plate
Layout
Model Space
3 - T Clip
Layout
Model Space
4 - Channel Plate
Layout
Model Space
5 - Slider Block
Layout
Model Space
6 - Circular Spacer
Layout
Model Space
Lesson 5
Modify Commands
1 - I made one center triangle and then used the copy command on the triangles on the edges.
2 - I selected the bottom triangle and used the rotate command.
3 - Next I used the move command on the bottom triangle.
4 - Then I used the trim command to make the smaller triangles appear behind the big triangle.
5 - Next I used the mirror command and drew the line of reflection horizontally in the center to make a weird, cool looking shape.
6 - Finally I used the trim command to clean up some lines along the edges, and then the line array command to make three equidistant circles in the center of triangles.
Lesson 6
Adjustable Support
Layout
Model Space
V-Slide Plate
Layout
Model Space
Swivel Base
Layout
Model Space
Sensor Mount
Layout
Model Space
Support Base
Layout
Model Space
Flat Hook
Layout
Model Space
Journal Bracket
Layout
Model Space
Indexing Base
Model space with all center and construction lines.
Model space finalized, only center lines.
Final drawing with no center or construction lines.
Page updated
Google Sites
Report abuse