Design Process

Research Paper

1. For the research paper, first we researched the topic and became familiar with what a PCB was

2. Then we learned how to design one and wrote down the steps in an easier way for people to understand

3. Lastly, we just edited together and put it on the website

Circuit

1. We first identified the inputs and wanted outputs of the circuit.

2. Then, we wrote a truth table representing each different input situation.

3. Thirdly, we derived four logic equations from the truth table.

4. After we double checked the logic equations, we then made the circuits on circuits lab.

5. After the logic part of the circuits is done, we added the flip-flops and the speaker system using ic555 provided by the professor.

6. Finally, we ran multiple simulations to ensure that our circuits if functioning properly.

Webpage

1. We first finished up our work and then posted it to the webpage

Tinker Cad

1. First we created our initial design in Circuit Lab

2. Next, when moving on to Tinker Cad we carried over our original idea and tried to make it work in Tinker Cad