Professor

| Pang Sung Jun 방성준

직위(직급) : 부교수

연구실 : 전남대학교 농업생명과학대학 1호관 106호(임시)

교수전공 및 연구분야 : 목조건축재료공학

연락처 : 062-530-2094

이메일 : sjp@jnu.ac.kr

| Education

2011.3-2015.8 Ph.D. Course

Department of Forest Sciences, Seoul National University

Thesis: Stochastic model for predicting bending strength of glued-laminated timber

based on characteristics of lamination

2008.3-2010.2 Master Course

Department of Forest Sciences, Seoul National University

Thesis: The Moment-Carrying Capacity of Dovetail Joints

in Traditional Korean Wooden Buildings

2000.3-2008.2 Bachelor of Science in Engineering

Department of Architectural Engineering, Kumoh National Institute of Technology

Thesis: An Analysis of the Air-Penetrating Characteristics of the Types of Joints

between Wooden Columns and Earth-Finished Walls in Korean Traditional Architecture

| Academic / Research Experience

2024.3-Present Associate Professor at Chonnam National University

2023.8-2024.2 Research Scientist in Department of Forest Products

National Institute of Forest Science, Seoul, Korea

2019.1-2023.08 BK (Research) Assistant Professor, Seoul National University, Republic of Korea

2017.7-2018.12 Research professor in Department of Wood Science and Engineering

Chonnam National University, Gwangju, Korea

2016.3-2017.6 Post-doctoral researcher in Department of Forest Products

National Institute of Forest Science, Seoul, Korea

| Journal Publication

1. Sung-Jun Pang, Kyung-Sun Ahn, Seok-man Jeong, Gun-Cheol Lee, Hyeon-Soo Kim, Jung-Kwon Oh

Prediction of bending performance for a separable CLT-concrete composite slab connected by notch connectors

Journal of Building Engineering 49 (SCIE)

2. Sung-Jun Pang, Jung-Kwon Oh

Bending Behavior of Separable Glued-Laminated Timber (GLT)-Steel Beam Combined with Inclined Screws

BioResources 18(2), 3838-3855 (SCIE)

3. Sung-Jun Pang, Kyung-Sun Ahn, Min-Jeong Kim, Sung-Wook Hwang, Seog Goo Kang, Hyo Won Kwak, Hwanmyeong Yeo, Jung-Kwon Oh

Effect of Intumescent Coating on the Charring Rate of Nail-laminated Timber

Bioresources 17(4) (SCIE)

4. Sung-Jun Pang, Kyung-Sun Ahn, Jae-Won Oh, Han Shik Lee, Seog Goo Kang, Jung-Kwon Oh

Fire resistance of structural wooden walls covered by gypsum and diatomite board

Bioresources 18(1) 991~1007 (SCIE)

5. Sung-Jun Pang, Han Shik Lee, Jung-Kwon Oh

Lateral Load Carrying Capacities of Particleboard Shear Walls Made by Gluing with Timber Studs

Bioresources 18(1) 1072~1095 (SCIE)

6. Jae-Won Oh, Keum-Sung Park, Hyeon Soo Kim, Ik Kim, Sung-Jun Pang, Kyung-Sun Ahn, Jung-Kwon Oh

Comparative CO2 Emissions of Concrete and Timber Slabs with Equivalent Structural Performance

Energy and Buildings 281 (SCIE)

7. Sung-Wook HWANG. Hyunwoo CHUNG, Taekyeong LEE, Kyung-Sun AHN, Sung-Jun Pang, Junsik BANG, Hyo Won KWAK, Jung-Kwon OH, Hwanmyeong YEO

Monitoring of Moisture and Dimensional Behaviors of Nail-Laminated Timber (NLT)-Concrete Slab Exposed to Outdoor Air

J. Korean Wood Sci. Technol. 2022; 50(5):301-314 (SCOPUS, KCI)

8. Sung-Wook Hwang, Hyunwoo Chung, Taekyeong Lee, Kyung-Sun Ahn, Sung-Jun Pang, Ji Yong Kim, Junsik Bang, Minjung Jung, Jung-Kwon Oh, Hyo Won Kwak, Hwanmyeong Yeo

Dimensional behavior of nail-laminated timber-concrete composite caused by changes in ambient air, and correlation among temperature, relative humidity, and strain

BIORESOURCES 18(1) (SCIE)

9. Sung-Wook Hwang, Sung-Yun Hwang, Taekyeong Lee, Kyung-Sun Ahn, Sung-Jun Pang, Jinseok Park, Jung-Kwon Oh, Hyo Won Kwak, Hwanmyeong Yeo

Investigation of Electrical Characteristics Using Various Electrodes for Evaluating the Moisture Content in Wood

BioResources 16(4), 7040-7055. (SCIE)

10.Sung-Jun Pang, Kug-Bo Shim, Keon-Ho Kim

Effects of knot area ratio on the bending properties of cross‑laminated timber made from Korean pine

Wood Science and Technology 55, 489–503 (SCIE)

https://doi.org/10.1007/s00226-020-01255-5

11.Sung-Jun Pang, Kyung-Sun Ahn, Seog Goo Kang, Jung-Kwon Oh (2020)

Lateral resistance of mass timber shear wall connected by withdrawal type connectors

Journal of Wood Science (SCIE)

12.Kyung-Sun Ahn, Sung-Jun Pang, Jung-Kwon Oh (2021)

Prediction of withdrawal resistance of single screw on Korean wood products
Journal of the Korean wood science and technology 49(1): pp.93-102 (SCOPUS, KCI)

13.Sung-Jun Pang, Kyung-Sun Ahn, Seog Goo Kang, Jung-Kwon Oh (2020)

Prediction of withdrawal resistance for a screw in hybrid cross-laminated timber

Journal of Wood Science 66 (SCIE)

https://doi.org/10.1186/s10086-020-01926-8

14.Sung-Jun Pang, Hyeon-Jeong Lee, Kyung-Sun Ahn, Jung-Kwon Oh (2020)

Sensitivity of censored data analysis to determine the characteristic value of structural timber

Journal of Wood Science 66 (SCIE)

https://doi.org/10.1186/s10086-020-01885-0

15.Sung-Jun Pang, Hyeon-Jeong Lee, Seung Min Yang, Seog Goo Kang, Jung-Kwon Oh (2019)

Moment and shear capacity of Ply-lam composed with plywood and structural timber under out-of-plane bending

Journal of Wood Science 65 (SCIE)

https://doi.org/10.1186/s10086-019-1847-8

16.Sung-Jun Pang, Gi Young Jeong (2020)

Swelling and shrinkage behaviors of cross-laminated timber made of different species with various lamina thickness and combinations.

Construction and Building Materials 240, (SCIE)

https://doi.org/10.1016/j.conbuildmat.2019.117924

17.Sung-Jun Pang, Gi Young Jeong (2019)

Effects of combinations of lamina grade and thickness, and span-to-depth ratios on bending properties of cross-laminated timber (CLT) floor.

Construction and Building Materials 222:142-151 (SCIE)

https://doi.org/10.1016/j.conbuildmat.2019.06.012

18.Lee, So Sun, Sung-Jun Pang, and Gi Young Jeong (2019)

Effects of size, species, and adjacent lamina on moisture-related strain in glulam

Wood and Fiber Science 51.2 (2019): 1-18, (SCIE)

19.Sung-Jun Pang, Gi Young Jeong (2019)

Effects of density, temperature, size, grain angle of wood materials on nondestructive moisture meters
Journal of the Korean wood science and technology 47(1): pp.40-50 (SCOPUS, KCI)

20.Sung-Jun Pang, Gi Young Jeong (2018)

Load sharing and weakest lamina eﬀects on the compressive resistance of cross-laminated timber under in-plane loading

Journal of Wood Science 64:538–550, (SCIE)

https://doi.org/10.1007/s10086-018-1741-9

21.Sung-Jun Pang, Jung-Kwon Oh, Jung-Pyo Hong, Sang-Joon Lee, Jun-Jae Lee (2018)

Stochastic model for predicting the bending strength of glued-laminated timber based on the knot area ratio and localized MOE in lamina

Journal of Wood Science 64(2): pp.126-137 (SCIE)

22.Gi Young Jeong, Jin Hyuk Kong, Sang Joon Lee, Sung-Jun Pang

Comparisons of bearing properties for various oriented glulam using digital image correlation

Journal of Wood Science 64(3): pp.237-245 (SCIE)

23.Sung-Jun Pang, Jung-Kwon Oh, Jung-Pyo Hong, Sang-Joon Lee, Jun-Jae Lee (2017)

Effect of incising on the long-term biodeterioration resistance of alkaline copper quaternary (ACQ) treated wood

European Journal of Wood and Wood Products 75(5): pp.777-783 (SCIE)

24.Jung-Kwon Oh, Jung-Pyo Hong, Chul-Ki Kim, Sung-Jun Pang, Sang-Joon Lee, Jun-Jae Lee (2017)

Shear behavior of cross-laminated timber wall consisting of small panels

Journal of wood science 63(1): pp.45-55 (SCIE)

25.Sung-Jun Pang, Jung-Kwon Oh, Sang-Joon Lee, Jun-Ho Park, Sung-Il Jang, Jun-Jae Lee (2017)

Surface checking reduction effect of preservative-treated Korean larch round-woods with various physical treatments

Journal of the Korean wood science and technology 45(1): pp.107-115 (SCOPUS, KCI)

26.Sung-Jun Pang, Kwang-mo Kim , Sun-hyang Park , Sang-joon Lee (2017)

Bending behavior of nailed-jointed cross-laminated timber loaded perpendicular to plane
Journal of the Korean wood science and technology 45(6): pp.728-736 (SCOPUS, KCI)

27.Sung-Jun Pang, Bumjin Lee, Gi Young Jeong (2017)

Insulation Saving Effect for Korean Apartment House Using Cross-Laminated Timber (CLT)
Journal of the Korean wood science and technology 45(6): pp.846-856 (SCOPUS, KCI)

28.Sun-Hyang Park, Kwang-Mo Kim, Sung-Jun Pang, Jin Hyuk Kong, Sang-Joon Lee (2017)

Evaluation of Shear Strength by Direction of Wood Grain for Korean Pine Using PRF Adhesive
Journal of the Korean wood science and technology 45(3): pp.243-249 (SCOPUS, KCI)

29.Jung-Pyo Hong, Jun-Jae Lee, Hwanmyeong Yeo, Chul-Ki Kim, Sung-Jun Pang, Jung-Kwon Oh, (2016)

Parametric study on the capability of three-dimensional finite element analysis (3D-FEA) of compressive behaviour of Douglas fir

Holzforschung 70(6): pp.539-546 (SCIE)

30.Sung-Jun Pang, Jung-Pyo Hong, Jun-Jae Lee, Jung-Kwon Oh (2015)

Service Life Estimation of ACQ-treated Wood Based on Biodeterioration Resistance
Journal of the Korean wood science and technology 43(5): pp.641-651 (SCOPUS, KCI)

31.Jung-Pyo Hong, Jun-Jae Lee, Moon-Jae Park, Hwanmyeong Yeo, Sung-Jun Pang, Chul-Ki Kim, Jung-Kwon Oh (2015)

Determination of grade and design strengths of machine graded lumber in Korea

Journal of the Korean wood science and technology 43(4): pp.446-455 (SCOPUS, KCI)

32.Jung-Pyo Hong, Jung-Kwon Oh, Joo-Saeng Park, Yeon Jung Han, Sung-Jun Pang, Chul-Ki Kim, Jun-Jae Lee (2015)

Analysis of allowable stresses of machine graded lumber in Korea

Journal of the Korean wood science and technology 43(4): pp.456-462 (SCOPUS, KCI)

33.Sung-Jun Pang, Jung-Kwon Oh, Jun-Jae Lee (2013)

Alternative experimental method to evaluate moment-carrying capacity of traditional wood-to-wood joint with small scale experiment

Holzforschung 67 : 93~97 (SCIE)

34.Sung-Jun Pang, Jun-Jae Lee, Jung-Kwon Oh (2013)

Effect of test zone selection for evaluating bending strength of lumber
Journal of the Korean wood science and technology 41(5): pp.392-398 (SCOPUS, KCI)

35.Sung-Jun Pang, Jun-Jae Lee, Jung-Kwon Oh (2013)

Evaluation of Allowable Bending Stress of Dimension Lumber; Confidence Levels and Size-adjustment
Journal of the Korean wood science and technology 41(5): pp.432-439 (SCOPUS, KCI)

36.Yun Hui Kim, Hwan Myeong Yeo, Sung-Jun Pang, Sang Yun Yang, Sung Mo Kang, Kweon Hwan Hwang (2013)
A Study on the Introduction and Settlement of the Labeling System for Wood-based Products and Expanding in Korea
Journal of the Korean wood science and technology 41(3): pp.258-268 (SCOPUS, KCI)

37.Sang-Joon Lee, Sangdae Lee, Sung-Jun Pang, Chul-Ki Kim, Kwang-Mo Kim, Ki-Bok Kim, and Jun-Jae Lee (2013)
Indirect Detection of Internal Defects in Wooden Rafter with Ultrasound
Journal of the Korean wood science and technology 41(2): pp.164-172 (SCOPUS, KCI)

38.Sung-Jun Pang, Joo-Saeng Park, Kweon-Hwan Hwang, Gi-Young Jeong, Moon-Jae Park, and Jun-Jae Lee (2011)
Bending Strength of Korean Softwood Species for 120 x 180 mm Structural Members
Journal of the Korean wood science and technology 39(5): pp.444-450 (SCOPUS, KCI)

39.Sung-Jun Pang, Jung-Kwon Oh, Joo-Saeng Park, Chun-Young Park, Jun-Jae Lee (2011)
Moment-Carrying Capacity of Dovetailed Mortise and Tenon Joints with or without Beam Shoulder
Journal of Structural Engineering-ASCE 137(7): pp.785-789 (SCIE)

40.Sung-Jun Pang, Jung-Kwon Oh, Chun-Young Park, Jun-Jae Lee (2011)
Influence of crossing beam shoulder and wood density on moment-carrying capacity in Korean traditional dovetail joint
Journal of Wood Science 57(3): pp.159-202 (SCIE)

41.Sung-Jun Pang, Jung-Kwon Oh, Chun-Young Park, Joo-Sang Park, Moon-Jae Park, Jun-Jae Lee (2011)
Characteristic Evaluation of Bending Strength Distributions on Revised Korean Visual Grading Rule
Journal of the Korean wood science and technology, 39(1):pp.1-7 (SCOPUS, KCI)

42.Sung-Jun Pang, Sang-Joon Lee, Chun-Young Park, Jun-Jae Lee (2010)
Study of Establishing Wood Construction as Specialty Construction Business for Guaranteeing the Quality of Wood Structural Work in Korea
Journal of the Architectural Institute of Korea, 26(11): pp.119-127 (KCI)

43.Chun-Young Park, Sung-Jun Pang, Ju-Sang Park, Kwang-Mo Kim, Mun-Jae Park and Jun-Jae Lee (2010)
Study of the Distribution Properties and LRFD Code Conversion in Japanese Larch.
Journal of the Korean wood science and technology 38(2) pp.94-100 (SCOPUS, KCI)

44.Jong-Kook Lee, Hyun-Jong Moon, Beom-Sik Park, Sung-Jun Pang (2008)
An Analysis of the Air-Penetrating Characteristics of the Types of Joints between Wooden Columns and Earth-Finished Walls in Korean Traditional Architecture
Journal of the Architectural Institute of Korea, 24(4): pp.153-160 (KCI)

| Book, Software, and Patents

1. 이규화, 방성준

나무가 보내는 위험신호와 진단 : 육안교목평가(VTA)를 위한 사전

(Original: The Body Language of Trees)

바이오사이언스출판 (2018)

2. 드릴저항단면 시각화 프로그램

한국저작권위원회 (제 C-2021-010580 호)

3. 목구조 내화피복 설계 프로그램

한국저작권위원회 (제 C-2021-046184 호)

4. 못 접합 구조용집성판 제조 방법

대한민국특허청 (등록번호:101887#######)

5. 구조용 집성판의 함수율 변화에 따른 팽창 수축 변형 거동 예측 방법 및 시스템

대한민국특허청 (등록번호:102336#######)

6. 프리패브 전단벽모듈 연결구조

대한민국특허청 (등록번호:102461#######)

7. 노치 합판 전단접합부재를 이용한 목재와 콘크리트 합성 슬라브 및 이의 제조방법

대한민국특허청 (등록번호: 10-2022-0077492)

8. 친환경 하이브리드 목재슬라브

대한민국특허청 (출원번호:10-2020-0162163)

9. 목재 보가 소성 거동하도록 보강 제조하는 방법 및 그 방법에 의해 제조된 강재 보강 목재 보

대한민국특허청 (출원번호: 10-2023-0006857)

10. 건축용 패널 연결구 (디자인 H형상)

대한민국특허청 (등록번호:300911#######)

11. 건축용 패널 연결구 (디자인 C형상)

대한민국특허청 (등록번호:300911#######)

12. 건축용 패널 연결구 (디자인 T형상)

대한민국특허청 (등록번호:300911#######)

13. 건축용 패널 연결구 (디자인 사면체 형상)

대한민국특허청 (등록번호:300911#######)

14. 건축용 패널 연결구 (디자인 V형상)

대한민국특허청 (등록번호:300911#######)

15. 건축물용 연결철물

대한민국특허청 (등록번호:301144#######)

| Conference and seminar presentations

<2024 >

1. 교목의 안전성 판단을 위한 기본역학(3)

No. 2024-01 수목관리세미나 (2024.03.17)

2. 탄소중립을 위한 목조건축 산업 및 연구동향

제28회 Agri1st Research Meeting(ARM) (2024.03.28 17:00-18:00)

3. 목조빌딩 산업 및 구조기술 연구동향, 신진인재교류회

2024 대한건축학회 정기총회 및 춘계학술발표대회 (2024.04.25 13:30-15:30)

<2023 >

1. Sung-Jun Pang, Sang-Joon Lee, Hyo-Jin Lee, Yeon-Su Ha, Kwang-Mo Kim

Study on the vibration characteristics of CLT slabs by standard impact sources

(표준중량충격원에 의한 CLT 슬래브의 진동 특성 연구)

2023 한국음향학회 정기총회 및 추계학술발표대회 (2023.11.01-2023.11.03)

2. Sung-Jun Pang, Sang-Joon Lee, Hyo-Jin Lee, Yeon-Su Ha, Tae-Ik Hwang, Chul-Ki Kim, Kwang-Mo Kim

Study on the Vibration and Heavy-weight Impact Sound Characteristics of CLT Slabs According to Species and Panel Connections

(CLT 슬래브의 수종 및 패널간 접합방법에 따른 진동 및 중량충격음 특성 연구)

2023 한국목재공학회 추계학술발표대회 (2023.10.26-2023.10.27)

3. Jae-Won Oh, Kyung-Sun Ahn, Min-Jeong Kim, Gwang Ryul Lee, Sang-Hyun You, Sung-Jun Pang, Chul-ki Kim, Keon-ho Kim, Jung-Kwon Oh

A Study on Pull-out Strength and Stiffness Properties for Glued-in Rods in Korean Larch

(국산 낙엽송 Glued-in rod의 인방 강도 및 강성 특성 연구)

2023 한국목재공학회 추계학술발표대회 (2023.10.26-2023.10.27)

4. Sung-Jun Pang, Sang-Joon Lee, Kwang-Mo Kim, Jung-Kwon Oh

Development of structural design method for separable GLT-steel beam combined with inclined screws

Structural Engineers World Congress (SEWC) 2023, (2023.10.18-2023.10.20)

The Korean Structural Engineers Association

5. Jae-Won Oh, Sung-Jun Pang, Kyung-Sun Ahn, Jung-Kwon Oh

A Comparative Study of the Environmental Impacts of Wood, Concrete, and Steel at the Building Component Level

Structural Engineers World Congress (SEWC) 2023, (2023.10.18-2023.10.20)

The Korean Structural Engineers Association

6. Kyung-Sun Ahn, Sung-Jun Pang, Ji-Yong Kim, Min-Jeong Kim, Jae-Won Oh, Gwang Ryul Lee, Jung-Kwon Oh

Development of structural performance evaluation of timber-plywood-concrete composite slabs with novel shear connections

Structural Engineers World Congress (SEWC) 2023, (2023.10.18-2023.10.20)

The Korean Structural Engineers Association

7. Sung-Jun Pang, Kyung-Sun Ahn, Gwang Ryul Lee, Min-Jeong Kim, Jae-Won Oh, Jung-Kwon Oh

Bending behavior of GLT-steel beam connected by inclined screws

World Conference on Timber Engineering (WCTE) 2023 (2023.06.19-2023.06.22)

8. Jae-Won Oh, Sung-Jun Pang, Kyung-Sun Ahn, Jung-Kwon Oh

A structural-member level assessment of the environmental impact of timber, reinforced concrete and steel in building construction

World Conference on Timber Engineering (WCTE) 2023 (2023.06.19-2023.06.22)

9. Kyung-Sun Ahn, Sung-Jun Pang, Ji-Yong Kim, Jae-Won Oh, Min-Jeong Kim, Gwang Ryul Lee, Jung-Kwon Oh

Evaluation of timber-concrete slab connected with notched connection made of Korean larch structural plywood

World Conference on Timber Engineering (WCTE) 2023 (2023.06.19-2023.06.22)

10. Sung-Jun Pang, Jung-Kwon Oh

Development of a separable glued-laminated timber (GLT)-steel beam for eco-friendly construction and dismantling of buildings

(건축물의 친환경 시공·해체를 위한 재료 분리형 GLT-steel 보 개발)

2023 한국건축시공학회 봄학술발표대회 (2023.05.18-2023.05.19)

11. Sung-Jun Pang, Jung-Kwon Oh

Development of a separable glued-laminated timber (GLT)-steel beam for eco-friendly construction

(친환경 건축을 위한 재료 분리형 GLT-steel 보 개발)

2023 대한건축학회 춘계학술발표대회 (2023.04.27-2023.04.28)

12. Sung-Jun Pang, Han Shik Lee, Kyung-Sun Ahn, Gwang-Ryul Lee, Min-Jeong Kim, Jae-Won Oh, Jung-Kwon Oh

Development of Prefab Shear Wall System Using Particle Board

(파티클보드를 활용한 프리패브 전단벽시스템 개발)