Publications

International Journals

1. Ji Gyo Park, BaekGyu Kim, Jin Yeong Song, Keon Ko, Ho Kyoung Lee, Dongwhi Choi, Seunghun Baek, Sang Min Park, Machine learning-driven optimization of locally resonant metamaterials for simultaneous vibration control and effective triboelectric sensing, Nano Energy, Volume 142, Part A, September 2025, 111224

2. Byeonggi Kim, Jinwook Jung, Seunghun Baek, Byeongyong Lee, Degradation of lithium metal batteries due to dead lithium accumulation under ultrasound, Ultrasonics Sonochemistry, Volume 117, 2025, 107334

3. Taeksoo Jung, Sunghyun Jie, Huiyeol Lee, Jinwook Jung, Joonhee Kang, Seunghun Baek, Byeongyong Lee, Vibration-Induced Stabilization of Lithium Anodes: Synergistic Effects of Morphological and SEI Evolution, Adv. Sci. 2025, 2502192

4. Hyeongyeong Jin and Seunghun Baek, Development of a force identification method using system-level measurements with component-level reduced-order modeling, Nuclear Engineering and Technology, Volume 57, Issue 7, July 2025

5. Taesan Ryu, Seunghun Baek, Development of data-driven modeling method for nonlinear coupling components, Scientific Reports, 14, 14841(2024)

6. Jaewon Lee, Seunghun Baek, Intentional blade mistuning to emulate the dynamic influence of split ring damper, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, Apr 2024, 146(2)

7. Minseok Lee, Yong Hoon Jang, Seunghun Baek, Methodology for predicting optimal friction support location to attenuate vibrational energy in piping systems, Nuclear Engineering and Technology, 56 (5), May 2024, 1627-1637

8. Sumin Baek, Seunghun Baek, Influence of Contact Curvature on Frictional Energy Dissipation Under Varying Tangential Loads, Friction, 12 (2), 2024 

9. Junhyeong Kim, Bogdan I. Epureanu, Seunghun Baek, Dynamic Behavior Analysis of Systems with Friction and Hysteretic Effects, International Journal of Non-Linear Mechanics, 157, December 2023

10. Sunghyun Jie, Joonhee Kang, Seunghun Baek, and Byeongyong Lee, Enhanced electrochemical performance of li-ion battery via ultrasonic-assisted inorganic-rich and thin SEI layer, Ultrasonics Sonochemistry, 106620, 2023

11. Jinyeong Yu, Seung Jun Oh, Seunghun Baek, Jonghyun Kim, Taekyung Lee, Predicting the effect of processing parameters on caliber-rolled Mg alloys through machine learning, Applied Science, vol. 12 p. 10646, 2022

12. Junhyeong Kim, Seunghun Baek, Effect of relative phase of periodic loading on frictionally constrained joints, Journal of Mechanical Science and Technology, 2022

13. Seunghun Baek, Dynamic Response Predictions of Frictionally Constrained Lap Joint Subjected to Cyclic Loading, International Journal of Mechanics and Materials in Design, 18(2), 491-507 2022

14. Seunghun Baek, Bogdan Epureanu, Contact model identification for friction ring dampers in blisks with reduced order modeling, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 120, April 2020, 103374

15. Seunghun Baek, Bogdan Epureanu,Damping mistuning effects on the amplification factor and statistical investigation of vane packet, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 120, 1 April 2019, Pages 117-132 

16. Seunghun Baek, Bogdan Epureanu, Reduced-Order Modeling of Bladed Disks With Friction Ring Dampers, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, Dec 2017, 139(6): 061011 

17. Seunghun Baek, Bogdan Epureanu, Reduced-Order Models of Blisks With Small Geometric Mistuning, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, Aug 2017, 139(4): 041003 

18. Weihan Tang, Seunghun Baek, Bogdan Epureanu,Reduced-Order Models for Blisks With Small and Large Mistuning and Friction Dampers, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME,  Jan 2017, 139(1): 012507

Domestic Journals

1. HyeonGyeong Jin, Byeongyong Lee, Seunghun Baek, Development of a Force Identification Method using Component Mode Synthesis and System-level Response,Transactions of the KSNVE, 35(1), 108-120. 

2. Kyeong Min Kim, Seung-Hoon Bae, Hyeonwoong Kim and Seunghun Baek, Development of an Equivalent Model Generation Method for Hydraulic Pipe Fixtures in Machinery Using Genetic Algorithms, Journal of the Korean Society for Nondestructive Testing, Vol. 44, No. 6: 419-428, 2024

3. Seung-Hwan Do, Min-Ho Pak, Seunghun Baek, System-level measurements based force identification, The Journal of the Acoustical Society of Korea, 2024, vol.43, no.5, pp. 547-556 (10 pages)

4. Kyungsun Yoo, Min Park, Byeongyong Lee, Seunghun Baek, Study on Structural Analysis for Design Limit Setting of Carbon Fiber Reinforced Plastic Spacer, Trans. Korean Soc. Noise Vib. Eng., 34(4) : 447~457, 2024

5. Da Som Kang, Seonmin Kim, Seung-Hoon Bae, Dae-Won Cho, Dae-Hwan Kim, Tae-Kook Park, Seunghun Baek, Minhyeok Yang, Seunghwan Do, Modal Parameter Estimation for PH15-7Mo Bracket Vibration Fatigue Failure with a Base Excitation, Transactions of the Korean Society for Noise and Vibration Engineering. 33(6), 663-670, December 2023

6. Sunghyun Jie, Taeksoo Jung, Seunghun Baek and Byeongyong Lee, REVIEW: Dynamic force effects on batteries, The Journal of the Acoustical Society of Korea, 41 (6) 2022 

7. Jaeseok Heo, Yonghoon Jang, Seunghun Baek, Optimum positioning of friction support for vibration reduction in piping system , The Journal of the Acoustical Society of Korea, 41 (6) 2022 

8. Chan-Kyeong Kim, Seunghun Baek, Design optimization of tuned mass damper for the vibration of hydraulic pipeline, The Journal of the Acoustical Society of Korea, 40 (1) 2021 

9. Seunghun Baek, DaeEun Kim, Microphone-Based Whisker Tactile Sensors Modeling Rodent Whiskers, 로봇학회 논문지 제4권 제1호 (2009. 3)

Conferences

1. 백수민, 백승훈, 비선형 댐핑 요소가 포함된 회전체 시스템의 동적 거동 해석, 2025년 춘계 소음진동 학술대회, 2025

2. 이재운, 백승훈, 데이터기반 비선형 힘 식별 알고리즘 개발, 2025년 춘계 소음진동 학술대회, 2025

3. 이재원, 백승훈, A Framework for Leader-Following in Unstructured Environments for Off-Road Vehicles , 2025년 춘계 소음진동 학술대회, 2025

4. 전현민, 백승훈, 반 능동 스프링 길이 제어를 통한 X-형태 구조의 준영강성 구현, 2025년 춘계 소음진동 학술대회, 2025

5. 표상호, 백승훈, 링크-스프링과 곡면 메커니즘을 갖는 2-자유도 QZS 진동절연 시스템의 힘전달성, 2024 한국음향학회 추계학술발표대회 (**우수발표상: ASK24-56J)

6. 이재운, 백승훈, SINDy-PI 알고리즘을 활용한 비선형 힘 식별, 2024 한국음향학회 추계학술발표대회

7. 전현민, 백승훈, 큰 이동 범위를 갖는 Double-Parallelogram 구조 기반의 2-자유도 스테이지 개발성, 2024 한국음향학회 추계학술발표대회

8. 백수민, 백승훈, 차량 HIL 시뮬레이션을 위한 타이어 포스 모델링 기법 연구, 2024년 춘계 소음진동 학술대회, 2024

9. 이재운, 백승훈, SINDy-PI 알고리즘을 활용한 쿨롱-점성 마찰모델의 식별, 2024년 춘계 소음진동 학술대회, 2024

10. 도승환, 백승훈, 시스템 레벨의응답과 유한요소해석을 통합한 가진력 추정, 2024년 춘계 소음진동 학술대회, 2024

11. 진현경, 백승훈, 차수 감소 모델을 이용한 구조물의 접촉력 예측 기법 개발, 2024년 춘계 소음진동 학술대회, 2024

12. Seunghun Baek, Dynamic substructuring for real-time application, 2024 International Conference of Applied Nonlinear Dynamics of Multi-Scale Systems, 2024

13. Do Seunghwan, Seunghun Baek, Force identification method integrating system-level measurement and FE analysis, 2024 International Conference of Applied Nonlinear Dynamics of Multi-Scale Systems, 2024

14. Sumin Baek, Seunghun Baek,  Influence of Contact Curvature on Frictional Energy Dissipation Under Varying Tangential Loads, 2024 International Conference of Applied Nonlinear Dynamics of Multi-Scale Systems, 2024

15. HyeongGyeong Jin, Seunghun Baek, Development of Data-Based Nonlinear Fastening Component Modeling Techniques, 2024 International Conference of Applied Nonlinear Dynamics of Multi-Scale Systems, 2024

16. Jaewon Lee, Seunghun Baek, Intentional blade mistuning to emulate the dynamic influence of split ring damper, 2024 International Conference of Applied Nonlinear Dynamics of Multi-Scale Systems, 2024

17. 이재원, 백승훈, 분할 링 댐퍼의 동적 영향을 모사하기 위한 의도적인 블레이드 비동조, 2023년 추계 소음진동 학술대회, 2023

18. 류태산, 백승훈, Development of data-driven modeling method for coupled nonlinear component, 2023년 추계 소음진동 학술대회, 2023

19. 김준형, 백승훈, 마찰 및 이력 효과가 고려된 시스템의 동적 거동 분석, 2023년 추계 소음진동 학술대회, 2023

20. Sumin Baek, Seunghun Baek, Influence of contact curvature on frictional energy dissipation, The 25th Ctorss Stratis Syposium on Energy and Environmental Science and Technology, 2023

21. Junhyung Kim, Seunghun Baek, Dynamic behavior analysis of systems with friction and hysteretic effects, The 25th Ctorss Stratis Syposium on Energy and Environmental Science and Technology, 2023

22. Sumin Baek, Seunghun Baek, A numerical analysis of energy dissipation in conformal contact with geometric nonlinearity, International Tribology Society, 2023

23. 이민석, 백승훈, 마찰을 포함한 동조질량감쇠기 최적 설계, 춘계소음진동학술대회, 2022

24. Seunghun Baek, Yong Hoon Jang, Effect of frictional damping on dynamic response of lap joint, Korean Tribology Society, Sep. 2020 

25. Seunghun Baek, Bogdan Epureanu, Reduced-Order Modeling of Bladed Disks With Friction Ring Dampers, ASME Turbo Expo 2016, Sep., 2016 

26. Seunghun Baek, Yixin Zhao, Bogdan Epureanu, Reduced-Order Models of Blisks With Small Geometric Mistuning, ASME Turbo Expo 2016, Jun., 2016 

Book Chapter

1. Roettgen, D.R. et al. (2018). A Comparison of Reduced Order Modeling Techniques Used in Dynamic Substructuring. In: Brake, M. (eds) The Mechanics of Jointed Structures. Springer, Cham. https://doi.org/10.1007/978-3-319-56818-8_26