In this guide, we will show you how to download the MTK Flash Tool and use it to flash your Android device. Many Android users resort to flashing firmware on their devices manually. This may be due to a number of reasons. One of the most common reasons for this is that OEMs usually roll out the OTA update to their devices in batches, so this means some devices have to wait a long time until they finally get the OTA update. But if you try to manually update your device's firmware, you just need to get the update package and then update your device immediately.
In addition to this, manual flashing also helps to bring devices back to working order. When you flash or install custom binaries on your device, or do any other tweaks on your device, there is always a chance that something will go downhill, which means you could end up with a locked or bootable device. But as we mentioned, the MTK Flash tool can solve this problem. This shows that manual flashing has many advantages, so flashing the firmware with the MTK Flash tool is an absolute priority. So, without further ado, let's get to that.
Must Read:
MTK Flash Tool is also known as MediaTek Flash Tool. This tool has many useful features. Below we have mentioned some of the noted features of the tool:
Flashing Firmware: Using the MTK Flash tool, you can easily flash firmware files to your MediaTek devices. You just need to get the firmware package, then download the file and then click the download button to complete your task.
Support for various firmware formats: In addition, this tool is also compatible with.CFG file format and also supports. TXT files that we can find in MediaTek firmware packages.
Portable Application: This tool is also portable in nature, which means you don't have to install it. You just need to extract the tool from your computer and run it directly.
These mentioned features were some of the main ones we see with the MTK Flash Tool. Now it's time to discuss the firmware installation procedure using the MTK Flash tool.
Before we move on to the firmware installation procedure using this tool, let's take a look at some of the files that you need to download before starting the process. So, from the section below, download the files and after downloading them, follow the instructions:
Download and install the MediaTek VCom drivers on your computer first.
After that, download the MTK Flash Tool file to your computer from the provided link: MTK Flash Tool.
Similarly, download the stock firmware you want to download to your {{MediaTek}} device.
STEP 1: First of all, you should extract the MTK flash program you downloaded to any convenient directory on your computer.
STEP 2: After that, navigate to this folder you have extracted and then run the tool by double-clicking on Flash_Tool.exe.
STEP 3: Once the tool has been opened, click on the Scatter File / Configure button as shown in the image.
STEP 4: After that, find the.CFG file or. TXT file from the standard firmware package you downloaded for your device, select the file, and click OK.
STEP 5: After completing the steps above, turn off your device, and then connect it to your computer using a USB cable.
STEP 6: After that click on the download button you see in the tool. After that, the flashing process will begin.
STEP 7: You will know that the flashing process is complete when you see the green circle icon.
STEP 8: Finally, you can remove your device from the PC and then close the MTK Flash tool.
So, that was from our side on how to flash the firmware on your MediaTek device using the MTK Flash tool. We hope you have found this guide helpful. Let us know what you think in the comments section below.