When Starlink.com/activate does not seem to work, the cause is usually small. In most cases it is your account email, the view of the sky, the cables or a plan that needs a look. This guide gives you checks in three groups, from the quickest to the longest. Start at the top and stop as soon as your kit comes online.
These are the quick ones. Do all of them before anything else.
Check the Power
Make sure the power cable is pushed in firmly at both ends, and that the outlet is working. Plug something else into the same outlet to test it.
Check the Lights and the Wi-Fi Name
Look at the router. Is it on? Can your phone see its Wi-Fi name? If not, give it a few more minutes, because the kit can take a while to start.
Check the Email You Signed In With
Open the app or the website and look at the email shown on your account. Is it the one you used when you ordered? A different email is the most common reason a kit does not show up.
Check Your Phone Connection
Make sure your phone is joined to the Starlink Wi-Fi, not to another network nearby. Look at the name in your phone settings.
Check the Address You Typed
Look at the address bar. Make sure you typed the address yourself and that it has no extra letters or words.
Restart the Kit Properly
Turn off the power to the kit.
Wait a full minute.
Turn the power back on.
Give it a few minutes to start.
A short on and off is not the same as a proper restart. The wait matters.
Check the Cables
Look along each cable for sharp bends, cuts or loose plugs. Push each plug in again. A cable that looks fine can still have a loose end.
Check the Dish View
The dish needs a wide view of the sky.
What to Look For
Trees with leaves or branches near the dish
Roofs, walls and poles that stand tall in its path
A spot in the shade of a building for part of the day
What to Do
Use the obstruction check in the Starlink app, if you have it. If something blocks the view, move the dish to a clearer spot and test again.
Check for an Update
Sometimes the kit installs an update after it starts. Leave it on and wait for it to finish. Do not unplug it during this time.
Check Your Plan and Account
Sign in to your account on the website or in the app. Look at your plan. Is it active? Is there a message about payment or a missing detail? Fix anything the account asks for, then try again.
Check the Kit Is Linked
In your account, look for your kit in the list. If it is not there, it may not be linked to this account yet. Check the other emails you use before you try to add it again.
Check Your Devices
Too many devices on the Wi-Fi can slow things down. Turn off the Wi-Fi on a few devices and test again.
Try Another Device
Test the Wi-Fi with a second phone or a laptop. If one device works and another does not, the problem is with that device, not with the kit.
Try a Different Spot for the Dish
If the first spot keeps failing, try a new one, even for a short test. Make sure the dish is steady and cannot fall.
Match what you see to the list, then use the checks above that fit.
The Kit Does Not Show Up in My Account
Check the email first. Then look at the other emails you use. If it is still missing, check that you are signed in to the right account, not a second one.
There Is No Wi-Fi Name
Wait a few more minutes. Check the power and the cables. Restart the kit properly.
I Am Connected but There Is No Internet
Check the dish view, then your plan and account. Restart the kit and test again.
The Signal Keeps Dropping
This is often a view problem. Look for things that block the sky, and move the dish if you can.
It Is Slow
Check how many devices use the Wi-Fi. Move closer to the router. Check for a blocked view.
The App Cannot Find My Kit
Make sure your phone is on the Starlink Wi-Fi. Close the app and open it again. Restart the kit.
Fixing the dish in place before testing the view
Unplugging the kit again and again, with no wait in between
Signing in with a different email than the one on your order
Skipping the update and turning the kit off too soon
Joining the wrong Wi-Fi network
Giving up before the kit has had a few minutes to start
If you try several things, write them down. A short note saves you from repeating the same check.
The date and time
What you checked
What you saw on the screen
Which email you used
This also makes it easy to tell what changed if the problem comes back.
What Is Starlink.com/Activate?
It is a web address people search for when they want to set up a new Starlink kit. Your kit and plan are linked to your account, and you can also manage them in the app.
Why Is My Kit Not Showing in My Account?
You may be signed in with a different email, or the kit may not be linked yet. Check your other emails first.
How Long Should I Wait Before I Restart?
A few minutes is usually enough for the kit to start. If nothing happens, do a proper restart with a one-minute wait.
Does the Weather Change My Signal?
Heavy rain or snow can sometimes change how the signal behaves. If the problem comes only in bad weather, wait and test again after it clears.
Do I Need the App?
It is very useful. It shows the status of your kit and helps you check the view of the sky.
When Starlink.com/activate does not seem to work, do not rush. Check the quick things first, such as the power, the Wi-Fi name and your account email. Then check the cables, the view of the sky and your plan. Most problems end in the first two groups of checks.