Quick answer: If someone gives you a Starlink kit as a gift, the giver must first transfer the kit out of their account. After that, you go to the Starlink activation page, enter the Kit ID, create your own account, and pick a plan. The kit will not activate if it is still linked to the old owner.
If you are the giver, this guide shows you what to do before you hand the kit over. If you are the new owner, it shows you how to activate it with the starlink.com/activate steps. We keep it simple, one step at a time.
What Is a Gift Kit Transfer?
A gift kit is a Starlink kit that one person gives to another. The dish and router are tied to the first person’s Starlink account. Before the new owner can use it, that link has to be removed. This is called a transfer.
Many people think handing over the box is enough. It is not. The old owner needs to release the kit in their account, and the new owner needs to add it to a new one.
What You Need Before You Start
A few things make the move quick and smooth.
The full kit: dish, router, cables and power supply
The Kit ID (also called the kit serial number), usually on the box label
The Terminal ID, which you can find in the Starlink app
The old owner’s account login, to start the transfer
An email address for the new owner’s account
The new owner’s service address
Tip: Take a photo of the Kit ID on the box before you hand it over. It helps if you need it later.
For the Giver: How to Release the Kit
Sign in to your Starlink account on the website or in the app.
Cancel your service plan if one is still active.
Find the kit under your devices and choose the Transfer option.
Read and confirm the conditions. This removes the kit from your account for good.
If asked, enter the new owner’s email so Starlink can send them an activation link. You can skip this step.
Factory reset the router so your Wi-Fi name and password are cleared.
Hand over every item in the kit, along with the Kit ID.
Share the Terminal ID too, which is found in the app under Settings, then Advanced.
Tip: Do not hand over the kit until the transfer step is finished. Cancelling service alone does not release the kit.
For the New Owner: How to Activate Your Gift Kit
Check that the giver has finished the transfer.
Open the Starlink activation page in your browser. You can reach it through the Starlink website.
Enter the Kit ID you were given.
Choose New Account if you are new to Starlink, or Existing Account if you already have one.
Enter your name, email and the address where you will use the kit.
Choose a service plan that is available at your address.
Add your payment details and confirm.
Set up the dish and router, and wait for the app to show that you are online.
Check Your Address and Plan First
Service is not available at every address. Even a kit that was transferred correctly may not get the plan you want if your area is busy. Check your address on the Starlink website before you set up the dish. If your area has limits, you may see other plan choices instead.
If the kit came from another region or country, check that it can be used where you live.
Is There a Waiting Period?
Some kits cannot be moved to a new owner right away, for example if they were activated very recently or if the account has an unpaid balance. If the Transfer option is missing or greyed out, check your account for a note about this. The rules can change, so follow what you see on your account page.
Common Problems and Quick Fixes
Problem 1: The page says the kit is already assigned
What it usually means: The old owner has not finished the transfer.
Ask the giver to open their account and find the kit.
Ask them to choose Transfer and confirm it.
Wait a few minutes, then try the Kit ID again.
Problem 2: The Kit ID is not accepted
What it usually means: The ID may have a typo or may be the wrong number.
Check the label on the box or the app for the correct Kit ID.
Type it slowly and check look-alike characters, such as the letter O and the number 0.
Make sure you are not using the dish serial number by mistake.
Problem 3: There is no plan for my address
What it usually means: Your area may be full or not covered yet.
Check your address spelling on the Starlink website.
Look at the other plan choices that are shown.
Try again later, because availability can change.
Problem 4: I cannot find the Transfer option
What it usually means: The kit may not be eligible yet.
Make sure you are signed in to the right account.
Check for unpaid balances or notes about a waiting period.
Look at the help section of your account for the latest rules.
Problem 5: The router still shows the old Wi-Fi name
What it usually means: The router was not reset.
Factory reset the router from the Starlink app.
Set up a new Wi-Fi name and password.
Reconnect your devices.
Tips for a Smooth Handover
Finish the transfer before you give away the kit, or before you receive it.
Keep your account email and Kit ID in a safe place.
Give the new owner every part of the kit.
If the kit is still under warranty, tell the new owner, because the warranty may stay with the kit.
Use only the Starlink website or app to activate. Be careful with any message that asks you to pay a stranger or call a number to activate.
Frequently Asked Questions
What is starlink.com/activate used for?
People use it to find the page where they enter a Kit ID and activate a Starlink kit on a new or existing account.
Can I activate a gift kit without the giver’s help?
Not usually. The giver needs to transfer the kit out of their account first.
Do I need a new account for a gift kit?
If you do not have a Starlink account, yes. If you already have one, you can add the kit to it.
Where do I find the Kit ID?
It is on the box label. The Terminal ID is in the Starlink app under Settings, then Advanced.
Will my giver’s plan move to me?
No. You choose your own plan and payment on your own account.
What if I do not know the previous owner?
Without the old owner’s help, the kit may stay locked to their account. Contact Starlink support from your account and explain how you got the kit.
Final Thoughts
Moving a Starlink gift kit to a new owner is simple when you follow the order. The giver cancels the plan, transfers the kit out of the account and hands over every part with the Kit ID. The new owner then activates the kit on the Starlink activation page, chooses a plan, and sets up the dish. If you see an “already assigned” message, the transfer step is the first thing to check.
This guide is for general information only. Menu names, plans and rules can change, so always follow what you see on your own screen.