User Manual

The Smart Irrigation System is an automated plant care solution that utilizes soil moisture and temperature sensors to ensure optimal hydration and environmental conditions for your plants. The system simulates watering and activates a fan to maintain a healthy environment for your plants. 

How to setup

1. Connect the power supply to the Smart Irrigation System. Once powered on, the system will display real-time data for soil moisture and temperature.

2. Insert the soil moisture sensor into the soil where you want to monitor moisture levels. Place it about 2-3 inches below the surface, near the plant's root zone.

3. Place the temperature sensor in an open area where it is not blocked by objects or shadows. This will ensure accurate temperature readings.

4. If you're using the system in a closed space, place the fan in a location where it can help lower the temperature when it gets too hot.
5. Connect the servo to your watering system to control the watering process. The system will automatically activate watering when needed.
6. Once everything is connected, you're good to go! The system will automatically monitor the soil moisture and temperature, ensuring optimal care for your plants.

How It Works

• Watering Activation

When soil moisture falls below 30%, the servo motor will activate to simulate watering, and the LED will light up to indicate that watering is taking place.

• Temperature Control

If the temperature exceeds 24°C, the fan will turn on automatically to cool the environment.

• Real-Time Monitoring

The system continuously displays the soil moisture and temperature readings every 5 seconds, providing real-time insights.

• Pause and Resume

Simply press the Push button to pause the system.

FAQ & Troubleshooting