Articles (in reverse chronology)
International Journals
86. Ashwani Chaudhary, Amey Parnaik, Ruslan Mendagaliev, Marina Gushchina, Priyanka Nadig, R. L. Narayan, "Comparative Wear Behaviour of Hot-Forged and LPBF-Manufactured 18Ni300 Maraging Steel in Pre- and Post-Processed Conditions", Journal of Materials Engineering and Performance (2025) Accepted.
85. D. Bhattacharyya, Priyanka Saini, R.L. Narayan, V. K. Baheti, "A COMPARATIVE STUDY ON THE CREEP BEHAVIOUR OF OZONE TREATED JUTE FABRIC/EPOXY COMPOSITES FILLED WITH OZONIZED AND PULVERIZED PLANT FIBRES", Journal of Composite Materials (2025) Accepted.
84. K.S.N. Satish Idury, Yunzhuo Lu, A.H.V Pavan, V. Chakkravarthy, Nandkishore Singh, Shiva Sekar, Stanislav Evalshin, M.O. Guschina, Gleb Turichin, R.L. Narayan*, "Defects - Fatigue Correlations of Post Processed Laser Powder Bed Fused Metallic Alloys : A Review", Advanced Engineering Materials (2025) Accepted.
83. Juhi Verma,Yogesh Prabhu, Daffiny Sara Joshua, S. Vincent, Simran Nath, R. Lakshmi Narayan, Jatin Bhatta, "Nanoindentation and Corrosion Performance of Zr47Cu40Al8Ag4Dy1 Bulk Metallic Glass for Biomedical Load-Bearing Applications", Journal of Materials Science (2025) Accepted.
82. Karthik Kumar, L. Hughes, U. Mahmud, Y. L. Chiu, I. P. Jones, R. Lakshmi Narayan* and Jayant Jain, "Effect of Mg content on the aging behaviour and tensile properties of squeeze-cast Al-7Si-xMg alloys (x= 0-0.8 wt. %)", Materialia (2025) Accepted.
81. Natthanicha Boonlert, Zhaowei Wang, Kai Chen, Hao Shen, Peng Zhang, R.L. Narayan*, "Cooling rate and solution temperature dependent coarsening mechanism in DZ125 Ni-based superalloy", Materials Characterization (2025) Accepted.
80. A.E. Medvedev, O.O. Zhukova , N.A. Enikeev, V.U. Kazykhanov, R.L. Narayan*, M.Yu. Murashkin. "The effect of casting-defined phase composition on the structural transformation and electro-mechanical properties in Al-Fe alloy after severe plastic deformation", Physical Mesomechanics (2025), Accepted.
79. Yaojie Wen, Yang Gao, R. Lakshmi Narayan*, Wei Cai, Pei Wang, Xiaoding Wei, Baicheng Zhang, Upadrasta Ramamurty, Xuanhui Qu, "Tensile Behavior of Additively Manufactured Inconel 718 and Stainless Steel 316L with Compositionally Graded Joints", International Journal of Plasticity (2025), Accepted
78. Vijay Shankar Sridharan, Virendra Kumar Verma, R. Lakshmi Narayan*, Xu Lu, Du Siwei, Varun Chaudhary, Li Hua, Dong ZhiLi, "Hydrogen embrittlement of Additively manufactured metallic materials" International Journal of Hydrogen Energy (2025), Accepted.
77. D. Mishra, A. Dhalb, X. Li, S. Guo, R.L. Narayan, R.S. Mishra, J. Singh, S.S. Nene, "Phase separation induced heterostructure promotes strength-ductility synergy in Cu-rich compositionally complex alloy in as-cast state", Materials Today Communications (2025), Accepted.
76. S.A. Smirnov, A.V. Filippova, O.N. Dubinin, S.A. Shalnova, A.P. Simonov, I.V Sergeichev, G. Qian, A. Dmitrieva, S.V. Zherebtsov, R. L. Narayan* and S.A. Evlashin "In-Situ Alloying of Directed Energy Deposition fabricated Ti6Al4V with Nitrogen", Journal of Alloys and Compounds (2025), Accepted.
75. J. Vigneshwaran, Arunkumar Sakthivel, Ankita Kumari, R. L. Narayan*, V Chakkravarthy, Dibyajyoti Ghosh, and Sujin P J, "Efficiently designed three-dimensional architecture of CoMn2O4 decorated V2CTx MXene for asymmetric supercapacitors", ACS Applied Materials and Interfaces (2024), Accepted.
74. Amey Parnaik, A.H.V. Pavan, A. Das, O.G. Klimova-Korsmik, M.O. Gushchina, Kai Chen, R. L. Narayan*, "On Enhancing the Creep Performance of Modified 9Cr-1Mo Steel by Employing a Secondary Short-term Heat Treatment", Journal of Materials Science (2024), Accepted.
73. V. Chakkravarthy, P. Manojkumar, S. Jerome, S. A. Evlashin, Jinoop Arackal Narayanan, R.V. Mendagaliev, A.O. Sidorenko, R.L.Narayan*, "Effect of impact angle on hot corrosion resistance of abrasive water jet peened Ti-6Al-4V alloy", Surface and Coatings Technology (2024), Accepted.
72. Ajaykumar Udayraj Yadav, Priyanshu Bajaj, R. L. Narayan* and K. S. N. Vikrant, "Corrosion Studies of Al-Mg-Sc-Zr Alloy with Low Sc/Zr Ratio Fabricated by Laser Powder Bed Fusion for Marine Environments", Materials Letters, (2024) Accepted
71. Amey Parnaik, Jitendar Kumar Tiwari, V. Chakkravarthy, Yaojie Wen, Baicheng Zhang, R.L. Narayan*,"Tensile properties and coefficient of thermal expansion of laser powder bed fusion fabricated IN718-YSZ compositionally graded composite", Advanced Engineering Materials, (2024) Accepted.
70. Xuan Huang, Kai Chen, Liucheng Zhou, R. Lakshmi Narayan, Upadrasta Ramamurty, "Effect of laser energy on the fretting wear resistance of femtosecond laser shock peened Ti6Al4V", Surface and Coatings Technology, vol. 494 (P-1), pp. 131353 (2024).
69. Yuan Tian, Yunzhuo Lu, R. Lakshmi Narayan*, "Optimization of tensile properties and anisotropy in a cryogenically treated laser additively manufactured high entropy alloy", International Journal of Plasticity, vol. 178, pp. 104015 (2024).
68. Chenyu Ren, Kai Chen, Jingjing Liang, R. Lakshmi Narayan, Upadrasta Ramamurty, Jinguo Li, "Microstructural evolution and its influence on the wear resistance of a laser directed energy deposited Ni-based single crystal superalloy", Journal of Materials Science and Technology, (2024) Accepted.
67. J. Vigneshwaran, Jemini Jose, Siby Thomas, R.L. Narayan, Alessio Gagliardi and Sujin P Jose "PPy-PdO modified MXene for flexible binder-free electrodes for asymmetric supercapacitors: Insights from experimental and DFT investigations", Chemical Engineering Journal, vol. 487, pp. 150555 (2024).
66. Amey Parnaik, A.H.V. Pavan, S.S. Silchonok, N.G. Kislov, R.L. Narayan*, "High-cycle fatigue behavior of Haynes 282 superalloy subjected to accelerated ageing", International Journal of Fatigue, vol. 182, pp. 108234 (2024)
65. Yaojie Wen, Xiaoke Wu, Ankun Huang, Ramasubramanian Lakshmi Narayan*, Pei Wang, Lijun Zhang, Baicheng Zhang, Upadrasta Ramamurty, Xuanhui Qu, "Laser powder bed fusion of immiscible steel and bronze: a compositional gradient approach for optimum constituent combination", Acta Materialia, vol. 264, pp. 119572 (2024)
64. Yogesh Prabhu, Abhilasha Jain, R. Lakshmi Narayan, Priyanka Saini, S. Vincent, W. H. Ryu, E. S. Park, Jatin Bhatt, "Crystallization Kinetics and Nanoindentation Studies of Cu46Zr40Ti8.5Al5.5 Glassy Alloy", Journal of Non-crystalline Solids, vol. 625, pp. 122753 (2024).
63. Priyanka Saini, Yakai Zhao, Biao Li, Long Zhang, Upadrasta Ramamurty, R.L. Narayan*, "Temperature dependence of pressure sensitive flow in bulk metallic glass composites", Journal of Materials Science and Technology, vol. 181, pp. 165-175 (2024).
62. Priyanka Saini, Shankha Nag, Jae-il Jang, In-Chul Choi, Upadrasta Ramamurty, R.L. Narayan*, "A statistical analysis of the second ‘pop-in’ behaviour of the spherical-tip nanoindentation of Zr-based bulk metallic glasses", Materialia, vol. 31, pp. 101862 (2023).
61. Karthik Kumar, Nooruddin Ansari, R. Lakshmi Narayan and Jayant Jain, "The recrystallization, texture and mechanical behavior of hot rolled and annealed Mg-10Ho binary alloy", Journal of Alloys and Compounds, vol. 955, pp. 170329 (2023).
60. Karthik Kumar, Aniruddha Malakar, R. Lakshmi Narayan and Jayant Jain, "Effect of Sr addition on the high temperature deformation behavior and processing maps of Mg-7Sn alloy", Journal of Alloys and Compounds, vol. 954, pp. 170073 (2023).
59. V. Chakkravarthy, P. Manojkumar, M. Lakshmanan, K. Eswar Prasad, Rucha Dafale, V. Chitra Vadhana, R.L. Narayan*, "Comparing Bio-Tribocorrosion of Selective Laser Melted Titanium-25%Niobium and Conventionally Manufactured Ti-6Al-4V in Inflammatory Conditions", Journal of Alloys and Compounds, vol. 952, pp. 169852 (2023).
58. V. Chakkravarthy, J.P. Oliveira, Anisa Mahomed, Nan Yu, P. Manojkumar, M. Lakshmanan, Long Zhang, S. Jerome, T. Ram Prabhu, R.L. Narayan*, "Effect of abrasive water jet peening on NaCl-induced hot corrosion behavior of Ti-6Al-4V", Vacuum, vol. 210, pp. 111872 (2023).
57. Y. Wen, J. Gao, R. L. Narayan*, P. Wang, L. Zhang, B. Zhang, U. Ramamurty, X. Qu, “Microstructure-property correlations in as-built and heat treated compositionally graded stainless steel 316L-Inconel 718 alloy fabricated by laser powder bed fusion”, Materials Science and Engineering A, vol. 862, pp. 144515 (2022).
56. J. Vigneshwaran, R. L. Narayan, Dibyajyoti Ghosh, V Chakkravarthy, and Sujin P Jose, "Robust hierarchical three dimensional Nickel Cobalt Tungstate-MXene nanocomposite for high performance symmetric coin cell supercapacitors", Journal of Energy Storage, vol. 56, pp. 106102 (2022).
55. Xuan Huang, Wenxin Zhu, Kai Chen, R. Lakshmi Narayan, Upadrasta Ramamurty, Liucheng Zhou, Weifeng Hea, "Twin and dislocation induced grain subdivision and strengthening in laser shock peened Ti", International Journal of Plasticity, vol. 159, pp. 103476 (2022).
54. Karuna Kumar. G, V Chakkravarthy, P Manojkumar, M Lakshmanan, R.L. Narayan, A. Rajesh Kannan, "Effect of robotic weaving motion on mechanical and microstructural characteristics of wire arc additively manufactured NiTi shape memory alloy", International Journal of Materials Research (2022), Accepted.
53. Abhilasha Jain, Yogesh Prabhu, Dmitry Gunderov, R. Lakshmi Narayan, Priyanka Saini, S. Vincent, Priya Sudha, Ashutosh D. Bagde, Jatin Bhatt, "Structural characterization, biocorrosion and in-vitro investigation on Zr62Cu22Al10Fe5Dy1 metallic glass for bio-implant applications", Journal of Non-crystalline Solids, vol. 598, pp. 121928 (2022).
52. Tingyi Yan, Long Zhang, R. Lakshmi Narayan*, Jingyu Pang, Yi Wu, Huameng Fu, Hong Li, Upadrasta Ramamurty, Haifeng Zhang, "Effects of Al addition and cryogenic cyclic treatment on impact toughness of phase-transformable Ti-based bulk metallic glass composites", Journal of Materials Science & Technology, vol. 140, pp. 210-220 (2022).
51. S. Pradeep Kumar, V. Chakkravarthy, A. Mahalingam, R. Rajeshshyam, N. Sriraman, P. Marimuthu, R. Lakshmi Narayan and P. Dinesh Babu, "Investigation of crystallographic orientation and mechanical behaviour in laser-welded stainless steel 316L additive components", Transactions of the Indian Institute of Metals , vol. 76, pp. 527-535 (2023).
50. K.S.N.S. Idury, R.L. Narayan*, "A critical appraisal of the role of oxygen in phase evolution and mechanical properties of Additively Manufactured Bulk Metallic Glasses", Transactions of the Indian Institute of Metals, pp. 1-9 (2022).
49. A. Sharma, S.S. Hirmukhe, Sree Harsha Nandam, Horst Hahn, I. Singh, R. Lakshmi Narayan, K.E. Prasad, "Strain rate sensitivity of a Cu60Zr40 metallic and nanoglass", Journal of Alloys and Compounds, vol. 921, pp. 165991 (2022).
48. Wang Chao, Lou Yuming, Peng Yichao, Huang Yijun, Bao Ting, Li Jixue, R. Lakshmi Narayan*, "Oxidation assisted recrystallization and cracking at grain boundaries in Nimonic 80A during elevated temperature service", Corrosion Science, vol. 205, pp. 110452 (2022).
47. Weihua Hu, Zejiang Yu, Yunzhuo Lu, Juntao Huo, Zuoxiang Qin, Xing Lu, R. Lakshmi Narayan,* "Enhanced plasticity in laser additive manufactured Nb-reinforced bulk metallic glass composite", Journal of Alloys and Compounds, pp. 165539 (2022).
46. Devashish Rajpoot, Parag Tandaiya, R. Lakshmi Narayan, Upadrasta Ramamurty, “Size effects and failure regimes in notched micro-cantilever beam fracture”, Acta Materialia, pp. 118041 (2022).
45. T. Yan, L. Zhang, R. L. Narayan*, J. Pang, Y. Wu, H. Fu, H. Li, H. Zhang, U. Ramamurty "Temperature-dependence of impact toughness of bulk metallic glass composites containing phase transformable β-Ti crystals", Acta Materialia, vol. 229, pp. 117827 (2022).
44. P. Kumar, Jayaraj R., Z. Zhu, R. L. Narayan, U. Ramamurty, "Role of metastable austenite in the fatigue resistance of 304L stainless steel produced by laser-based powder bed fusion", Materials Science and Engineering A, vol. 837, pp. 142744 (2022).
43. S. Huang, P. Kumar, R. L. Narayan, W. Y. Yeong, U. Ramamurty, "Fracture Behavior of Laser Powder Bed Fusion Fabricated Ti41Nb via In-situ Alloying", Acta Materialia, vol. 225, pp. 117593 (2022).
42. AHV Pavan, R. L. Narayan*, Shi-Hao Li, Kulvir Singh, U. Ramamurty, “Mechanical behavior and dynamic strain ageing in Haynes®282 superalloy subjected to accelerated ageing”, Materials Science and Engineering A, vol. 832, pp. 142486 (2021).
41. Priyanka Saini and R. L. Narayan*, "On simultaneous enhancement in local yield strength and plasticity of short-term annealed bulk metallic glasses", Journal of alloys and Compounds, vol. 898, pp. 162960 (2021).
40. K.S.N Satish Idury, V. Chakkravarthy, R. L. Narayan*, "Mechanical Behavior of Laser Powder Bed Fusion processed Inconel 625", Transactions of the Indian National Academy of Engineering, vol. 6, pp. 975-990 (2021).
39. Devashish Rajpoot, R. Lakshmi Narayan*, Long Zhang , Punit Kumar, Haifeng Zhang, Parag Tandaiya, Upadrasta Ramamurty, "Fracture toughness of a rejuvenated β-Ti reinforced bulk metallic glass matrix composite", Journal of Materials Science & Technology, vol. 106, pp. 225-235 (2021).
38. Rashid Mehmood, R.L. Narayan*, Dan-li Zhang, Wei-Zhong Han, “A Comparative Study of Microstructures and Mechanical Behavior of Laser Metal Deposited and Electron Beam Melted Ti6Al4V”, Journal of Materials Engineering and Performance, vol. 31, pp. 542-551 (2021).
37. Chetan Singh, R.L. Narayan, J. Jain, “Influence of simultaneous alloying with Ca and Sc on the high temperature deformation mechanism, texture, and recrystallization behavior of Mg-Ca-Sc alloys”, Materials Characterization, vol. 179, pp. 111343 (2021).
36. P. Kumar, Z. Zhu , S. M. L. Nai, R. L. Narayan, U. Ramamurty, "Fracture toughness of 304L austenitic stainless steel produced by laser powder bed fusion", Scripta Materialia, vol. 202, pp. 114002 (2021).
35. M. Yu, L. Yang, L. Sun, Y. Zhang, R. L. Narayan, Y. Qin, Q. Fu, L. Zhang, and X. H. Ning, "Refined Tin Nanoparticles by Oxidation–Reduction Treatment for Use in Potassium-Ion Batteries", ACS Appl. Nano Mater., vol. 4, pp. 4432-4440 (2021).
34. D. Rajpoot, R. L. Narayan*, L. Zhang, P. Kumar, H. Zhang, P. Tandaiya, U. Ramamurty, "Shear fracture in bulk metallic glass composites", Acta Materialia, vol. 213, pp. 116963 (2021).
33. Lin Tian, R. L. Narayan*, Zhou Kun, Rita Babicheva, Upadrasta Ramamurty, Zhiwei Shan, “A real time TEM study of the deformation mechanisms in β-Ti reinforced bulk metallic glass composites”, Materials Science and Engineering A, vol. 818, pp. 141427 (2021).
32. Yaojie Wen, Baicheng Zhang, R. L. Narayan, Wang Pei, Xu Song, Zhao Hao, U. Ramamurty, Qu Xuanhui, “Laser powder bed fusion of compositionally graded CoCrMo-Inconel 71", Additive Manufacturing, vol. 40, pp. 101926 (2021).
31. S. Chandra, X.- P. Tan, R. L. Narayan, C.C. Wang, M. Descoins, D. Mangelinck, S. B. Tor, G. Seet, "Nanometer-scale precipitations in a selective electron beam melted nickel-based superalloy" Scripta Materialia, vol. 194, pp. 113661 (2021).
30. Huang Sheng, R. L. Narayan*, Sing Swee Leong, Wai Yee Leong, "Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via Laser Powder Bed Fusion" Acta Materialia, vol. 204, pp. 116522 (2021).
29. S. Chandra, X.- P. Tan, R. L. Narayan, C.C. Wang, M. Descoins, D. Mangelinck, S. B. Tor, G. Seet, “A Generalized Hot Cracking Criterion for Nickel-Based Superalloys Additively Manufactured by Electron Beam Melting” Additive Manufacturing, vol. 37, pp. 101633 (2020).
28. AHV Pavan, R.L. Narayan*, Kulvir Singh, U. Ramamurty, “Effect of ageing on microstructure, mechanical properties and creep behavior of Alloy 740H” Met. Trans A, vol. 51, pp. 5169-5179 (2020).
27. R.K. Prusty, R.L. Narayan, M. Scherer, U. Steiner, V.S. Deshpande, N.A. Fleck, U. Ramamurty, “Spherical indentation response of a Ni double gyroid nanolattice”, Scripta Materialia, vol. 188, pp. 64-68 (2020).
26. AHV Pavan, R.L. Narayan*, Kulvir Singh, U. Ramamurty, “Stress Rupture Emrittlement in As Cast Alloy 625” Materials Science and Engineering A, vol. 793, pp. 139811 (2020).
25. L. Zhang, R. L. Narayan, B. A. Sun, T. Y. Yan, U. Ramamurty, J. Eckert, and H. F. Zhang “Cooperative shear in bulk metallic glass composites containing metastable β-Ti dendrites” Physical Review Letters, vol. 125, pp. 055501 (2020).
24. S. Nag, R.L. Narayan, C. Dasgupta, J. Jang, U. Ramamurty “On the stochastic aspects of incipient plasticity in metallic glasses” Scripta Materialia, vol. 187, pp. 360-365 (2020).
23. K.S.N Satish Idury, Pratyank Rastogi, R.L. Narayan, Nandkishore Singh, B.S. Murty, Jatin Bhatt, “Room temperature dynamic indentation response of partially crystallized Zr-Cu Metallic Glass”, Journal of Alloys and Compounds, vol. 834, pp. 155161 (2020).
22. Y. Li, K. Chen, R. L. Narayan, U. Ramamurty, Y. Wang, J. Long, N. Tamura, X. Zhou, “Multi-scale microstructural investigation of a laser 3D printed Ni-based superalloy”, Additive Manufacturing, vol.34, pp. 101220 (2020).
21. T. Dai, L. Yang, X-H. Ning, D. Zhang , R. L. Narayan, J. Li, Z-W. Shan “A low-cost intermediate temperature Fe/Graphite battery for large scale energy storage”, Energy Storage Materials, vol. 25, pp. 801-810 (2020).
20. D. Raut, R.L. Narayan, P. Tandaiya, Y. Yokoyama, U. Ramamurty “Fracture of notched ductile bulk metallic glass bars subjected to tension-torsion: experiments and simulations” Acta Materialia, vol. 168,pp. 309-320, (2019).
19. L. Zhang, R. L. Narayan, S. Chen, H. M. Fu, W. R. Li, Y. D. Li, U. Ramamurty, H. F. Zhang, “Tuning the microstructure and metastability of β-Ti for simultaneous enhancement of strength and ductility of Ti-based bulk metallic glass composites”, Acta Materialia, vol. 168, pp. 24-36, (2019).
18. L-Y. Sun, L. Yang, J. Li, R. L. Narayan, Xiao-Hui Ning, “Superior full-cell cycling and rate performance achieved by carbon coated hollow Fe3O4 nanoellipsoids for lithium ion battery”, Electrochimica Acta, vol. 288, pp. 71-81, (2018).
17. L. Yang, L.-Y. Sun, R-R Zhang, Y-W. Xu, X-H. Ning, Y-B. Qin, R. L. Narayan, J. Li and Z-W. Shan, “Reduced expansion and improved full-cell cycling of a SnOx#C embedded structure for lithium-ion batteries”, Journal of Materials Chemistry A, vol. 6, pp. 15738-15746, (2018).
16. R.L. Narayan, L. Tian, M. Dao, D.L. Zhang, K.J. Hsia, Z.W. Shan, “Effects of notches on the deformation behavior of submicron sized metallic glasses: Insights from in situ experiments” Acta Materialia, vol. 154, pp. 172-181, (2018).
15. R.L. Narayan, D. Raut, U. Ramamurty “A quantitative connection between shear band mediated plasticity and fracture initiation toughness of metallic glasses” Acta Materialia, vol. 150, pp. 69-77, (2018).
14. B-Y Liu, N. Yang, J. Wang, M. Barnett, Y.-C. Xin, D. Wu, R.-L. Xin, B. Li, R. L. Narayan, J. Li, E. Ma, Z.W. Shan “Insight from in situ microscopy into which precipitate morphology can enable high strength in magnesium alloys”, Journal of Materials Science & Technology, vol. 34, Issue 7, pp. 1061-1066, (2018).
13. T. Dai, Y. Zhao, X. Ning, R.L. Narayan, J. Li, Z.W. Shan “Capacity extended bismuth-antimony cathode for high-performance liquid metal battery” Journal of Power Sources, vol. 381, pp. 38-45, (2018)
12. D. Raut, R.L. Narayan, P. Tandaiya, U. Ramamurty “Temperature-dependence of fracture toughness of a bulk metallic glass” Acta Materialia, vol. 144, pp. 325-336, (2018)
11. W.Z. Han, M.S. Ding, R.L. Narayan, Z.W. Shan “In Situ Study of Deformation Twinning and Detwinning in Helium Irradiated Small‐Volume Copper”. Advanced Engineering Materials, pp. 170337, (2017)
10. C. Wang, Q. P. Cao, X. D. Wang, D. X. Zhang, U. Ramamurty, R. L. Narayan, J.‐Z. Jiang “Intermediate Temperature Brittleness in Metallic Glasses”. Advanced Materials, vol. 29 (14), (2017)
9. J. Ren , X.Wang , R.L. Narayan, C. Dong, Y. Cheng, D. Yu, Z.W. Shan “Synthesis and properties of flexible nanocable with carbon nanotube @ polymer hierarchical structure”. Nanotechnology, vol. 28 (9), 095710, (2017)
8. L. Yang, T. Dai, Y. Wang, D. Xie, R. L. Narayan, J. Li, X. Ning, “Chestnut-like SnO 2/C nanocomposites with enhanced lithium ion storage properties” Nano Energy, vol. 30, 885 (2016)
7. G. Singh, R.L. Narayan, A.M. Asiri, U. Ramamurty, “Discrete drops in the electrical contact resistance during nanoindentation of a bulk metallic glass”, Applied Physics Letters, vol. 108, 181903 (2016)
6. R. Narasimhan, Parag Tandaiya, I. Singh, R.L. Narayan, U. Ramamurty, “Fracture in metallic glasses: mechanics and mechanisms”, International journal of fracture. Vol. 191, pp 53-75, (2015).
5. R.L. Narayan, Parag Tandaiya, G. R. Garrett, M.D. Demetriou, U. Ramamurty, “On the variability in fracture toughness of ‘ductile’ bulk metallic glasses”, Scripta Materialia. Vol. 102, pp 75-78, (2015).
4. R.L. Narayan, Parag Tandaiya, R. Narasimhan, and U. Ramamurty, “Wallner lines, crack velocity and mechanisms of crack nucleation and growth in a brittle bulk metallic glass", Acta materialia. Vol. 80, pp. 407-420, (2014).
3. P. S. Singh, R.L. Narayan, Indrani Sen, D.C. Hofmann, and U. Ramamurty, “Effect of strain rate and temperature on the plastic deformation behavior of a bulk metallic glass composite”, Materials Science and Engineering A, vol. 534, pp. 476-484, (2012).
2. R.L. Narayan, P.S. Singh, D.C. Hofmann, N. Hutchinson, K.M. Flores, and U. Ramamurty, “On the microstructure - tensile property correlations in bulk metallic glass matrix composites with crystalline dendrites”, Acta materialia. Vol. 60, pp. 5089-5100, (2012).
1. R.L. Narayan, K. Boopathy, Indrani Sen, D.C. Hofmann, U. Ramamurty, “On the hardness and elastic modulus of bulk metallic glass matrix composites”, Scripta Materialia, vol. 63, pp. 768-771, (2010).
National Journals
K.S.N.S. Idury, R.L. Narayan*, "State-of-the-art in Laser Powder Bed Fusion of Aluminium Alloys", IIM Metal News, (2023), Accepted.
Editorials
1. Mangalampalli S.R.N. Kiran, D. Pamu, R. Lakshmi Narayan*, K. Eswara Prasad, Suresh Perumal, Srinivasa Rao Bakshi, “Advances in Functional and Structural Ceramics: Development, characterization, and applications”, Ceramics International, (2022).
Conference Proceedings
1. V Chakkravarthy, Sujin P Jose, M Lakshmanan, P Manojkumar, R. Lakshmi Narayan, M Kumaran, "Additive manufacturing of novel Ti-30Nb-2Zr biomimetic scaffolds for successful limb salvage", Materials Today: Proceedings (2022), Accepted
Invited Lectures
ICAMAT, Trichy, 2022, Invited talk
AUT winter School, Iran, 2022, Invited Keynote
IMAT Iran, 2021, Invited Keynote
ATAL Workshop, IIT Palakkad, 2021, Invited talk
ICMAT, Singapore, 2019, Invited talk
Silk Road Post-Doctoral Symposium, XJTU, China, 2019, Invited talk
Symposium on BMGs, TMS, January 2011, San Diego, USA, Invited talk
IIT Madras, 2017, Invited lecture