Powder Conveying System manufacturers in India

The powder transfer system (iTransfer) from Prochem is a reliable and effective way to move and distribute bulk powders or granules. This system is a significant improvement to any mechanical, pneumatic, or conventional material conveying process and provides a dust-free method of material transfer, particularly when the process demands more than 10 m3/hr.

Productivity has increased thanks to our pneumatic powder transfer system, which has safety and hygiene features built in. Our pneumatic powder conveying ensures complete process integration and reduces batch time. A suction device, a vessel with automated valves and a regeneration-type filter, a vacuum pump, intermediate piping and fittings, and a control panel make up the powder vacuum transfer system.

Powder Conveying System manufacturers in India-Prochem

The powder transport system from Indpro is small and modular, so it works well where powder needs to be moved, where space is usually a problem.

This power transfer system makes any mechanical, pneumatic, or conventional material conveying process significantly better and provides a dust-free method of material transfer.

Industries are aware of the value of pneumatic conveyors for moving large amounts of materials from one location to another. Specially engineered pneumatic conveying systems may hold a stream of air and a mixture of bulk solid material. According to the manner of transportation, a pneumatic conveyor can be divided into two main categories: dense phase systems (pressure and vacuum) or dilute phase systems (Pressure and Vacuum).

Powder Conveying System manufacturers in India-Prochem

A pneumatic conveyor is a conveying system that must be specifically designed and based.

Pneumatic transport is an essentially specially designed conveying framework and in light of item qualities, molecule size, throughput limit, number of sources, and number of objections.

The powder conveying system from Prochem is certain to be the most suitable pneumatic conveying system for the job. Prochem consistently delivers the best of both worlds because Prochem is an application expert and manufacturer of pneumatic conveying systems.

Prochem’s mission is to continue developing a wide range of pneumatic conveying technology and components.

Higher air velocities than in dense phase conveying (approximately) are the defining characteristic of dilute phase conveying. between 15 and 25 m/s). Throughout the conveying length, the product remains suspended in the pipeline.

The required air pressure or vacuum is less, usually between 100 and 1000 mbar(g) for pressure systems and 500 to 100 mbar(g) for vacuum systems.

The attrition or breakage of material in the pipeline is higher because of the greater intensity of impact on the metal surfaces at higher conveying velocities.

The solids loading ratio, which is the ratio of the rate of mass transfer between solids and air, is lower, usually between 1 and 10.

Powder Conveying System manufacturers in India-Prochem

For the same throughput or limit of conveying as thick stage conveying, commonly the pipeline size engaged with weakened stage would be of a bigger width.

The distance that can be covered is restricted, normally up to a limit of 100-200 meters, contingent upon the material conveyed.

How much mechanization is required and reliance on different valves is lower because of the straightforwardness of the framework.

Due to the simpler components involved, dilute phase systems have a lower or initial cost.

Check out Prochem’s website here https://www.prochem.co.in/