3D Printable Dolls
Embedded Files
Velvy
Mushy
Leathy
?
[ MY PRINTING SETTINGS ]
Material: PLA
Layer Height: 0.16mm
Infill: 30% for strung parts | 10% for the rest
Infill Pattern: Gyroid
Supports: Tree
Brim: Yes
Scale: Approximate height varies depending on the doll design. Most MonStars range between 15–17 cm (5.9–6.7 inches). You may rescale if desired, but please do so at your own risk.
[ ASSEMBLY & STRINGING ]
[ ASSEMBLY & STRINGING ]
To string and finish your MonStar doll, I recommend:
Elastic:
Round: 2mm (approx. 0.08 inches) or smaller.
Flat: 5mm wide (approx. 0.2 inches) with a 1mm thickness (0.04 inches).
Eyes: 16mm.
Magnets: 6mm x 2mm
Head S-Hook: Tested with 15mm x 6mm. If you want the S-hook to pass fully through the head opening, keep it under 9 mm (0.35 in) wide.
Every bit of support helps bring new MonStars to life 💖
Page updated
Google Sites
Report abuse