CCIE R&S vs. CCIE Enterprise Infrastructure

Original Content Source: https://passyourcert.blogspot.com/2022/06/ccie-r-and-s-vs-ccie-enterprise-infrastructure.html

What is CCIE Enterprise Infrastructure?

Objective & Syllabus:

Cisco is changing its flagship certificate program to meet rapid changes in technology requirements and changing adoption patterns within the field. The primary focus of the revamp of the certification program is to be job-ready today, tomorrow, and beyond. This is why the updated certification program reflects the evolving demands of the market and the way Cisco is adapting to the market's requirements and needs.

The CCIE R&S lab exam v5.0 was designed to test the skills in troubleshooting, diagnostics, and setting up technologies made available by Cisco devices. With the advancement of technology and the increasingly complex demands of the market. Cisco has revised its emphasis on proving the competency and capabilities of a CCIE to keep up with the evolving needs and trends of the field.

CCIEs cannot limit their work to troubleshooting, diagnosing, configuring, and troubleshooting tasks within the network. The industry is asking them to take on a much more extensive and complex role in setting up, managing, and maintaining their ever-changing network needs. The brand new CCIE Enterprise Infrastructure lab exam Version 1.0 will be aimed at assessing and confirming the candidate's skills throughout the entire process of developing, deploying, and optimizing the deployment of complex networks.

It refers to the fact that Cisco has re-launched its Certification program to allow a CCIE to handle day 0, Day 1, and Day 1 in the network's lifecycle. It means that a CCIE will be capable of managing design on Day 0 and deploying and configuring the solution on Day 1. before operating, managing the system, and overall optimization on Day 1. This is the main idea behind the overhaul of the certification. Another aspect that has played an important part is the emphasis on automation and network programmability.

This implies that the CCIE certificate program is completely revamped in line with the new syllabus to address the current and future requirements of the market, including a testing procedure (lab format) to verify the skills of candidates throughout the lifecycle of the network as well as the marking system, which is designed to correspond to the difficulty ratings and weightage.

Layer 2 Technologies 20%
Layer 3 Technologies 40%
VPN Technologies 20%
Infrastructure Security 5%
Infrastructure Services 15%

What's more, CCIE Enterprise Infrastructure v1.0 will evaluate the following areas:

Network Infrastructure 30%
Software-Defined Infrastructure 25%
Transport Technologies and Solutions 15%
Infrastructure Security and Services 15%
Infrastructure Automation and Programmability 15%

For complete exam areas for the CCIE Enterprise Infrastructure v1.0 lab exam, go to:

https://learningnetwork.cisco.com/community/certifications/ccie-enterprise/lab/exam-topics

The most significant difference is in HTML0, which is the difference between CCIE R&S v5.0 & CCIE Enterprise Infrastructure v1.0

The essence of the laboratory exam, along with the scoring system:

In the previous CCIE exam version 5.0, the R&S laboratory exam version 5.0 The following is the format that is used in the exam:

A 8-hour CCIE R&S Lab exam version 5.0 comprises three separate exam components:
2 Hour - Troubleshooting (TS)
30 Minutes - Diagnostics (DIAG)
5 Hours 30 Minutes - Configuration (CFG)

Virtual devices are utilized during the exam, which allows for greater realism and larger topologies of networks. This improves the accuracy of the exam by allowing the exam to use technology-related concepts instead of testing specific hardware features or management.

The order of the three lab modules has been established. The Diagnostic module follows the Troubleshooting Module and then The Configuration Module. Switching between modules is impossible, and the Diagnostics module is locked for 30 minutes.

Passing Marks -

To be able to pass the CCIE R&S lab exam version 5.0, Candidates must satisfy two requirements

1. The examinee must achieve or beat the minimum score on the three components.

And

2. The score of the examinee's overall (the total of all of the three components) must be equal or higher than the score for the entire lab exam)

Failure to meet any of these requirements fails the laboratory exam. There are occasions when the candidate has scored the required minimum score in all three modules but fails the exam. The reason for this is not meeting the second requirement of the overall score.

This criterion was designed to ensure that the CCIE should be competent in the three areas (TS, DIAG, and CFG). Candidates can't ignore one of the modules while focusing on the other two to be able to pass the exam.

The laboratory exam of the CCIE Enterprise Infrastructure v1.0 is as the following:

The laboratory exam is split into two modules with fixed timing and a sequence.

Module 1 - Design (3 Hours)

Module 2 – deploy and operate and optimize (5 hours)

The first portion, "Design 3 Hours' and the second section 'Design 3 Hours' focuses on the application of network design that is based on the technical need; It differs from the CCDE exam, which focuses on the design of high levels with reference to business requirements. The second section is 5 hours, which tests your knowledge in the 'Implement. Operate (it also covers troubleshooting) and Optimize' part of networks. Cisco will keep the general storyline through both modules and make minor changes such as adding branch networks. In the meantime each of these modules are independent.

Module 1: Design (3 Hours)

This module aims to evaluate the capacity to develop the ability to analyze, validate, and improve networks. The following abilities will be assessed:

Know the capabilities of the various technologies, solutions, and solutions
Transform client needs into solutions
Evaluate the readiness to accept suggested solutions

It is a scenario-based application without access to any device. The candidate will receive documentation, including emails, high-level design diagrams of network topology clients' requirements, as well as limitations.

There is no set amount or percent in terms of the pass threshold for the brand new CCIE Enterprise Infrastructure. Every lab exam will be unique and a resident psychometrician will evaluate each test to determine the level of difficulty and mark weightage. This means that each lab exam will be given a unique score for passing determined by an internal evaluation from members of the Cisco team.

The points associated with the item are not displayed in this module.

Module 2: Implement, Operate and optimize (5 hours)

The purpose of this course is to verify the skills in the field of deploying, operating, and optimizing network technology and solutions.

Deploy - Achieved network deployment, which includes configuring, integrating, and troubleshooting commissioning issues and solutions based on the exam syllabus
Operate and optimize - Monitoring networks' health, performance, and service quality improvements, which means fewer interruptions and downtime. Other evaluation aspects include reducing operating costs and ensuring high reliability, availability and security. Also, it evaluates the capability to detect potential problems and adjust or fine tune configurations to meet evolving objectives of the business and technological demands.

The points associated with the item are displayed on this page.

Exam Score Evaluation

Both modules will require the requirement for a minimum score as well as an acceptable score based on the level of difficulty.

The candidate must score more than the combined passing scores for both modules and above the minimum score set for each module individually.

If the examinee's score is less than the total averaged pass score from each module, they fail. If the examinee's score is less than the minimum score for one (or more) modules, the examinee also fails.

The candidates who don't pass the exam will receive an assessment report outlining the scoring percentages for each domain-specific section they completed or failed.

What are the advantages of CCIE Enterprise Infrastructure?

CCIE Enterprise Infrastructure lab exam and syllabus have been constructed in a manner that the capabilities of the test taker are evaluated the most effectively. The syllabus covers subjects relevant to the candidates about their work roles and organizational requirements. Candidates' skills are validated throughout the lifecycle that the networks go through. Candidates who pass the test are equipped with an understanding of Automation and Network programming skills since both of these buzzwords are covered during the CCIE Enterprise Infrastructure lab exam.

Success in your CCIE Enterprise Infrastructure lab exam will put you ahead of the other candidates in the race for the desired position or job. Large corporations and companies are seeking candidates who can manage their networks' entire life cycle and be prepared for the latest technologies.

Acquiring the CCIE Enterprise Infrastructure certification after having passed the test exam signifies that an individual is equipped with the most current knowledge of the entire lifecycle of networks. The ability of the candidate to comprehend, use and manage the network technologies is confirmed.

Market Demand for the CCIE Enterprise Infrastructure:

Markets are seeking skilled, well-educated, certified engineers who can immediately handle their networking needs. The CCIE certification from Cisco has been the standard for the network's capabilities for quite a while. The redesigned CCIE program, such as Enterprise Infrastructure, is the next step in this direction. The markets know the capabilities and experience of the CCIE professionals who are certified, and it can help candidates gain more job opportunities worldwide.

CCIE certification can open up the world job market to professionals. This CCIE program is a well-known and widely-received career certificate across the continents.

Market Opportunities for the CCIE Enterprise Infrastructure:

CCIE candidates can get Network Architect, Senior engineer, and Network engineer kind of roles. These are highly-paid and performance-oriented positions that could fetch a decent salary for most qualified candidates.

No matter what industry's domains or verticals, the CCIEs will always be in demand because of the rigorousness, integrity, credibility, and worth of the certification program and the person who has completed the entire nine miles of practice, preparation, and exam to show his skills.

Who should go to use the CCIE Enterprise Infrastructure?

Candidates looking for an ongoing career in networking are the ideal candidates for CCIE. CCIE cannot be something that should be done as a hobby in the absence of commitment. Professionals who have been networking for at least 5-7 years are ideal candidates for CCIE as long as they have the passion and determination to attain this prestigious networking certification around the globe.

CCIE accreditation is the ideal choice for those who are required to provide expert-level problem-solving skills that can provide support for complicated network topologies and technologies.

It is the most effective job-enhancing tool for IT professionals and students seeking an internationally recognized certificate to enhance their career prospects.

Prerequisites for the CCIE Enterprise Infrastructure:

Per the CISCO guidelines for certification, there is no requirement to take this CCIE lab exam. However, the candidate must pass the core technologies exam (ENCOR) (300-401). Candidates must not pass their CCNP or CCNA to take this CCIE laboratory exam.

Migrating to the new Program Recertification -

A lot of people have worked towards CCIE R&S for a long period. It is imperative to continue working in the same direction, and we'll be credited for the work we've done under this program.

If you completed the present CCIE Routing and Switching Written v5.0 exam before Feb 24 the of 2020, then you may take this CCIE R&S Lab exam v5.1 until April 26 on in 2020. After the 27 the 27th of April in 2020 you will be able to take the CCIE Enterprise Infrastructure within 3 years after having passed writing the v5.0 exam.
Suppose you have passed ENCOR 350-401, which will replace the present CCIE Routing & Switching Written v5.0 exam when it becomes made available on February 24 day 2020. In that case, you will be able to take the CCIE Enterprise Infrastructure v1.0 test. exam after three years after having passed this ENCOR exam.
If you successfully complete the CCIE R&S certification prior to April 26 the 26th 2020, on the 27th of April the 2020, you'll immediately receive the brand new CCIE Enterprise Infrastructure v1.0 certificate. In addition, you will be awarded a Cisco Certified Specialist - Enterprise Core certification.
If you're a member of the active CCNP or have successfully passed an exam that is equivalent to the technology core exam following migration then you'll be eligible to take an attempt at the CCIE Lab exam within three years of the date you passed this exam similar to core exam ENCOR 350-401. If you've completed ROUTE (300-101) as well as SWITCH (300-115) and TSHOT (300-135) you've achieved Cisco Certified Specialist - Enterprise Core. This makes you eligible to sit for the CCIE Enterprise Infrastructure v1.0 lab exam within three years after getting through the three exams that were mentioned earlier.
If you have currently enrolled in CCIE R&S v5.0as as of April 26 the 26th (April 26, 2020) You will be issued an updated CCIE Enterprise Infrastructure certification. Validity of initial CCIE R&S (two years) remains the same. In the updated CCIE program recertification requirements will be needed every 3 years. The current CCIE R7S v5.0 recertification requirements are after every two years.
Suspended status for CCIE will expire on February 24, 2020. If you're in suspended status at the time of February 24 2020, your certificate will remain active throughout the suspension term. To keep it active beyond the suspension period, CCIEs must comply with new recertification requirements. For instance, if your suspended status expires May 5 2020, then your CCIE will be active February 24 day 2020, and end on the 5th of May the 5th 2020, unless any new recertification requirements are fulfilled.
For more information on recertification, please contact passyourcert.net