Boron Nitride Aerosol Spray
You can use different types of lubricants to create a slippery surface for the metals. Furthermore, you can lower the friction as you get two metals in close proximity. One of the best glass and molten metals substances is the Boron Nitride Aerosol spray. It helps you apply the lubricant to the typical areas that are hard to reach. With a BN coating, you can significantly improve the concerned material's performance.
To use a perfect lubricant on a hot surface, it is important to know about the pros and cons of the particular substance. With Boron Nitride, you will not face any troubles while dealing with fragile items like glassware. Hence, the process will be very smooth and convenient. It will work fantastically, whether the temperature is a high one, like 800 degrees Celsius in the case of ordinary air.
However, Boron Nitride is similarly effective in the case of an environment with inert gases. The temperature in this respect can even go up to 1950 degrees Celsius.
Coating with the Boron Nitride Aerosol Spray
You must give a proper coating on the underlying surface to make the effect long-lasting. For that, there cannot be a better alternative than the Boron Nitride Aerosol Spray. Before use, you have to shake the bottle well. The application of a light coat on the stainless steel can help you maintain the product's capacity. Furthermore, you can also manufacture new products out of stainless steel.
After giving 2 or 4 coats on the concerned surface, you need to leave it in that state for about fifteen minutes. Yes, such a dry lubricant will not take much time to dry. Hence, waiting for a few minutes can give you the desired result. There must be a gap of at least 10 minutes between applying the coats.
Enhance the Life Of The Glass
Using a suitable lubricant will undoubtedly improve the performance of the surface. Moreover, you can increase the life of the glassware or other metals by applying the BN spray coating. Before applying the final light coat, it is better to go for some firings. It will help the coat to stay firm on the surface.