The Setup Builder tool in Operations Center allows users to load GreenStar™ displays with only the information most pertinent to the job about to take place. Setup Builder has been improved with the addition the of the recent setup files option enables the user to leverage a previously created setup file as a template, allowing them to quickly make adjustments to the setup file before resending it to a machine
1. To create a Setup file, select Start new file, or you have the option to Use a recent file.
2. Next select the types of operations that you will be utilizing the setup file for.
3. Select the products that will be applied.
4. Select the equipment that will be used for the operation.
5. Assign the filed that the setup file will be utilized in.
6. Choose the operators.
7. Name the Setup file: Planting2018.
8. Select the correct Display type.
9. Review the criteria that you selected, if correct select “create file”. If all of the critera has been met it will let you create the setup file
10. The new set up file will be located in the files app, from there it can be downloaded to a flash drive or sent directly to the piece of equipment if it has JDLink and an active subscription.
11. On the files page you can download the set up file or you can send the file directly to a machine that is utilizing JDLink
The button shown in red is the download selected file type. We have two options to download to:
****Link to John Deere Data Manager walk through
****It is recommended to utilize the John Deere Data Manager so that the files are transferred in the correct format.
The option shown shown in red is send files to machine.