Lighting Board

Error Code 003:

The light board will say error code 003 or something similar so this is the guide to anyone using the lights to actually be able to use them properly. 

1.  Press enter on the arrow keys to ok the menu on the blue display.

2.  There is a button called shift and mode, hold these both down for 5 seconds until the light at the left of the master sliders changes to superuser which is on the mode button. This has worked if you are in the board settings (superuser menu)

3.  Use the arrow keys at the bottom right of the board to control the menu, go down until you can see reset memory subs and press yes if asked for confirmation. 

4. After pressing yes you will be back to the superuser menu go down until you can see reset desk, confirm this and press yes.

5. Hold shift and mode until the board goes back to normal 

6. There is a button to the left of the arrow keys which lets you change the page number, press this once if the light turns yellow to the right of this, it has worked

7. That's it the board is working as usual.