Embedded Files
Medallion
Medallion
Top Three Designs
Top Three Designs
These are the top three design that were created. The design on the top (the first one) is the one that was chosen to be created for the project.
Simulation of the Cut
Simulation of the Cut
This is the simulation of the cut in Fusion. This will show how the medallion will be cut out and if it will be able to be cut.
Final Product / The Cut
Final Product / The Cut
This is a video of the cut.
This is an image of the final product.
11.5" x 11.5" Cutout
11.5" x 11.5" Cutout
This is a picture of the design in AutoCAD.
This is a picture of the design in fusion.
This is a simulation of the cut on Fusion
This is a video of the cut.
This is a picture of the final product.
Using Angle Grinder / Chiseling
Using Angle Grinder / Chiseling
This is the angle grinder being used to give the medallion a more shiny look.
This is the chiseling process which removes the excess metal on the backside of the medallion; this allows for a much cleaner look.
Page updated
Google Sites
Report abuse