Lalu Febrian Wiranata, Narendra Kurnia Putra, Deddy Kurniadi, Detection of Two-Phase Slug Flow Film Thickness by Ultrasonic Reflection, Chaos Theory and Applications, 6(4), 237-248. https://doi.org/10.51537/chaos.1539877
Isa Anshori, Febricetta Zahraketzia Sarwono, Muhammad Azhar Fa’iq, Narendra Kurnia Putra, Joko Suwardy, Agnes Purwidyantri, Briliant Adhi Prabowo, "From Design to Performance: 3D Printing-Enabled Optimization of Low-Cost Droplet Microfluidics", IEEE Sensors Journal, 20 November 2023.
Muhammad Shiddiq Sayyid Hashuro, Simon Tupin, Narendra Kurnia Putra, Kotaro Daibo, Kosuke Inoue, Takuro Ishii, Hiroyuki Kosukegawa, Kenichi Funamoto, Toshiyuki Hayase, Makoto Ohta. "Development of Ultrasound Phantom Made of Transparent Material: Feasibility of Optical Particle Image Velocimetry", Ultrasound in Medicine & Biology, 49 (6) 1385-1394 .
Wang Zi, Narendra Kurnia Putra, Hitomi Anzai, Makoto Ohta. (2022) "Endothelial Cells Distribution after Flow Exposure with Two Stent Struts Placed in the Different Angles", Frontiers in Physiology, 13 January 2022 .
Narendra Kurnia Putra, Bonfilio Nainggolan, Johanna Muliany, S Suprijanto. (2020) "Analisis Interaksi Aliran Darah dan Pembuluh Serta Pengaruh Kebebasan Mesh Pada Simulasi Hemodinamik Berbasis Metode Elemen Hingga",Journal of Science and Applicative Technology 4(2):54-60.
Hitomi Anzai, Tomohito Watanabe, Xiaobo Han, Narendra Kurnia Putra, Zi Wang, Hisatoshi Kobayashi, Makoto Ohta. (2020) "Endothelial cell distributions and migration under conditions of flow shear stress around a stent wire", Technology and Health Care 28(4): 345-354.
Tomo Kinoshita, Kazumasa Seiji, Narendra Kurnia Putra, Tomohito Watanabe, Sho Matsumoto, Makoto Ohta, Kei Takase. (2019) "Effect of a notch at the distal end of a microcatheter on vein deformation in segmental adrenal venous sampling: a preliminary study using computational fluid dynamics", Medical & Biological Engineering & Computing 57: 1425-1436.
Narendra Kurnia Putra, Pramudita Satria Palar, Hitomi Anzai, Koji Shimoyama, Makoto Ohta. (2019) "Multiobjective design optimization of stent geometry with wall deformation for triangular and rectangular struts", Medical & Biological Engineering & Computing 57:15-26.
Yasutomo Shimizu, Narendra Kurnia Putra, Makoto Ohta. (2018) "Reproduction method for dried biomodels composed of poly (vinyl alcohol) hydrogels", Scientific Reports 8(1):1-9.
Kun Peng, Aike Qiao, Makoto Ohta, Narendra Kurnia Putra, Xinyang Cui, Yongliang Mu, Hitomi Anzai. (2018) "Structural design and numerical analysis of a novel biodegradable zinc alloy stent", CMES-Computer Modeling in Engineering and Sciences 117(1):17-28.
Petrus Diyos Widhi Prasetya, Suprijanto, Tuwuh S. Wibowo, Makoto Ohta, Hitomi Anzai, Narendra Kurnia Putra. (2024) "Microfluidic Liquid Dispenser: Effects of Boundary Condition on Single Droplet Formation", The 21st International Conference on Flow Dynamics (ICFD 2024), Sendai, Japan.
Narendra Kurnia Putra, Febricetta Zahraketzia Sarwono, Isa Anshori, Makoto Ohta, Hitomi Anzai. (2023) “Numerical Simulation of Droplet Generation on the Sub-Millifluidic Channel”, The 23rd International Symposium on Advanced Fluid Information (AFI-2023), Sendai, Japan.
Narendra Kurnia Putra, Mikha Hilliard, Muhammad Rafi Sudrajat, Bonfilio Nainggolan, Makoto Ohta, Hitomi Anzai. (2022) “Development of Open-Source Deployment Method for Simulation and Optimization of Balloon Angioplasty and Stent Geometry Design based on Numerical Simulation”, The 22nd International Symposium on Advanced Fluid Information (AFI-2022), Sendai, Japan.
Muhammad Rafi Sudrajat, Bonfilio Nainggolan, Mikha Hilliard, Narendra Kurnia Putra, (2022) “Virtual Multilayer Stenting Simulation based on Spring-Mass Analogy”, The 19th International Conference on Flow Dynamics (ICFD 2022), Sendai, Japan.
Tsabita Fidinillah, Ayu Gareta Risangtuni, Narendra Kurnia Putra, Vani Virdyawan, Suprijanto Suprijanto, Syam Mega Putri, “Design of Soft Pneumatic Actuator in Hand Rehabilitation Robot with FEM-Based Modeling”, 2023 8th International Conference on Instrumentation, Control, and Automation (ICA),p. 109 - 113.
Febricetta Zahraketzia Sarwono, Muhammad Azhar Fa’iq, Isa Anshori, Narendra Kurnia Putra, “Numerical Simulation of 3D Printed Resin Droplet-Based Microfluidic Device With T-Junction Geometry”,2023 8th International Conference on Instrumentation, Control, and Automation (ICA),p.207 - 212.
Fara Azzahra Dinata, Muhammad Salman Al Farisi, Muhammad Iqbal, Narendra Kurnia Putra, Development of a Flow Simulator for Evaluation of Hemodynamics Computational Simulation, 2023 8th International Conference on Instrumentation, Control, and Automation (ICA),p.213 - 217.
Muhammad Ihsan Maulana, Bonfilio Nainggolan, Mikha Hilliard, Faqihza Mukhlish, Narendra Kurnia Putra, "Development of a Virtual Balloon Angioplasty Treatment Simulation Device Based on the Spring-Damper Method", 2023 8th International Conference on Instrumentation, Control, and Automation (ICA), p. 177-182 .
Muhammad Alfiyya Fajra, Harmein Khagi, Suprijanto Suprijanto, Narendra Kurnia Putra, "Validity of Temporal Encoded Structured Light RGB-D Handheld Scanner for Digital Anthropometric Measurement", 2023 8th International Conference on Instrumentation, Control, and Automation (ICA), p. 183-189.
Lalu Febrian Wiranata, Narendra Kurnia Putra, Deddy Kurniadi, "Embedded System for Image Reconstruction in Electrical Resistance Tomography", 2023 8th International Conference on Instrumentation, Control, and Automation (ICA), p. 42-47.
Narendra Kurnia Putra, Mikha Hilliard, Muhammad Rafi Sudrajat, Bonfilio Nainggolan, Makoto Ohta, Hitomi Anzai. (2022) “Development of Open-Source Deployment Method for Simulation and Optimization of Balloon Angioplasty and Stent Geometry Design based on Numerical Simulation”. The 22nd International Symposium on Advanced Fluid Information (AFI-2021), p. 72-73.
Muhammad Rafi Sudrajat, Bonfilio Nainggolan, Mikha Hilliard, Narendra Kurnia Putra. (2022)"Virtual Multilayer Stenting Simulation based on Spring-Mass Analogy". The 19th International Conference on Flow Dynamics (ICFD-2022), p. 437-436.
Petrus Canisius Astuto Santosa, Narendra Kurnia Putra, Bonfilio Nainggolan, Suprijanto, Makoto Ohta, Hitomi Anzai. (2021), "Investigations on Different Boundary Conditions to the Intravascular Flow Conditions", The 21st International Symposium on Advanced Fluid Information (AFI-2021) .
Bonfilio Nainggolan, Narendra Kurnia Putra, Suprijanto, (2021) "A Fast Virtual Stenting Simulation Framework For Lattice-Based Flow Diverter Stent Design Exploration and Evaluation", 2021 International Conference on Instrumentation, Control, and Automation (ICA).
Megasari Kurnia, Suprijanto, Narendra Kurnia Putra, Andar Bagus Sriwarno, (2021) "Electromyograph Processing Scheme For Quantification Muscle Workload in Use Suspended-Load Backpack during Running Activities", 2021 International Conference on Instrumentation, Control, and Automation (ICA).
Johanna Muliany, Narendra Kurnia Putra, Nugraha, Tomo Kinoshita, Makoto Ohta, Hitomi Anzai. (2020) " Construction of the Split-Tip Catheter Model of the Segemental Adrenal Venous Sampling Procedure using Computational Fluid Dynamics". Seventeenth International Conference on Flow Dynamics, p. 292-294.
Narendra Kurnia Putra, Harmein Khagi, Andar Bagus Sriwarno, S Suprijanto. (2020) "Biomechanical analysis on human gait and posture for development of floating backpack", IOP Conference Series: Materials Science and Engineering 830(3) .
Gina Fauziah Akasum, Narendra Kurnia Putra, Kaihong Yu, Suprijanto, Makoto Ohta. (2019) "Computational Study on Designing Bipolar RF Ablation Electrode", 6th International Conference on Computational & Mathematical Biomedical Engineering (CMBE 19), p. 682-685.
Zi Wang, Xiaobo Han, Narendra Kurnia Putra, Makoto Ohta. (2019) "Endothelial Cells Distribution Between Two Stent Struts After The Flow Exposure", 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 19), p.494-495.
Narendra Kurnia Putra, Zi Wang, Hitomi Anzai, Makoto Ohta. (2018) "Computational Fluid Dynamics Analysis to Predict Endothelial Cells Migration During Flow Exposure Experiment With Placement of Two Stent Wires", 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), p.5454-5457.
Narendra Kurnia Putra, Hitomi Anzai, Makoto Ohta. (2017) "Effects of Pulsatile Inlet Conditions on the Hemodynamic Conditions of Stent with Deformed Wall Simulations", 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering (ICICI-BME), p. 57-61.
Narendra Kurnia Putra, Pramudita Satria Palar, Hitomi Anzai, Koji Shimoyama, Makoto Ohta. (2017) "Stent design optimization based on Kriging surrogate model under deformed vessel wall: pulsatile inlet flow"., 2017 5th International Conference on Instrumentation, Control, and Automation (ICA), p. 172-176.
Narendra Kurnia Putra, Pramudita Satria Palar, Hitomi Anzai, Koji Shimoyama, Makoto Ohta. (2017), "In search for a better stent: Surrogate based multi-objective optimization of stent design under influence of vessel wall deformation", 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), p. 1344-1347.
Narendra Kurnia Putra, Pramudita Satria Palar, Hitomi Anzai, Koji Shimoyama, Makoto Ohta. (2017) "Comparative Study Between Different Strut’s Cross Section Shape on Minimizing Low Wall Shear Stress Along Stent Vicinity via Surrogate-Based Optimization", World Congress of Structural and Multidisciplinary Optimisation (WCSMO), p. 1097-2109.
Narendra Kurnia Putra, Janivita Sudirham, Saleh Wikarsa. (2015) "Simulation of tablet dissolution rate on virtual USP dissolution apparatus", 2015 4th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering (ICICI-BME) p. 319-322.
Anita Ayuningtiyas, Narendra Kurnia Putra, Endang Juliastuti, Lusi Epsilawati. (2013), "Quantitative image analysis of periapical dental radiography for dental condition diagnosis". 2013 3rd International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering (ICICI-BME) p. 363-366.
Hanifan Prafiadi, Narendra Kurnia Putra, Suprijanto, Fourier (2013), "Image analysis for correlation between dental panoramic and MicroCT to measure bone density", 2013 3rd International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering (ICICI-BME) p. 359-362.
Narendra Kurnia Putra, Andar Bagus Sriwarno, Suprijanto (2010). "Dynamic Modeling and Simulation of the Suspended-Load Backpack to Obtain Optimal Suspension Parameters and Reducing Effect of Ground Reaction Force". 6th World Congress of Biomechanics (WCB 2010).p.111-114.
Narendra Kurnia Putra , Fara Azzahra Dinata, Muhammad Iqbal, Muhammad Ihsan Maulana, and Muhammad Salman Al Farisi, (2023), “Trials on Mems Sensor Utilization on 3d Printed Intravascular Flow Model”, The 12th Asian-Pacific Conference on Biomechanics, Kuala Lumpur, Malaysia.
Muhammad Alfiyya Fajra, Harmein Khagi, Suprijanto and Narendra Kurnia Putra, (2023) “Evaluation of 3d Surface Scanning with Handheld 3d Scanner for Biomechanical Product Design”, The 12th Asian-Pacific Conference on Biomechanics, Kuala Lumpur, Malaysia.
Muhammad Ihsan Maulana, Bonfilio Nainggolan, Mikha Hilliard, Faqihza Mukhlish, and Narendra Kurnia Putra, (2023) “The Simulation of Blood Vessel Revascularization in Stenosis Case with Spring-Damper Analogy Method”, The 12th Asian-Pacific Conference on Biomechanics, Kuala Lumpur, Malaysia
Mikha Hilliard, Narendra Kurnia Putra, Bonfilio Nainggolan (2022) "Development of Computational Hemodynamics Study on Stent Deployment on The Stenotic Blood Vessel with Stent-Vessel Contact Conditions", The 9th World Congress of Biomechanics (WCB 2022).
Bonfilio Nainggolan, Narendra Kurnia Putra, Suprijanto. (2021) "Open-source approach for flow diverter design exploration", The 11th Asian-Pacific Conference on Biomechanics.
Johanna Muliany, Narendra Kurnia Putra, Nugraha, Tomo Kinoshita, Makoto Ohta, Hitomi Anzai. (2021) "Exploration of intravenal microcatheter tip design effects on the segmental adrenal venous sampling procedure ", The 11th Asian-Pacific Conference on Biomechanics.
Zi Wang, Yukiko Kojima, Narendra Kurnia Putra, Hitomi Anzai, Jean-Paul Rieu, Hiroki Taniho, Naofumi Ohtsu, Makoto Ohta. (2021) "Endothelial cells distribution after the flow exposure experiment", ELyT & Lyon SE&N Workshop 2021.
Hitomi Anzai, Mingzi Zhang, Narendra Kurnia Putra, Makoto Ohta. (2020), "Optimization of stent structure based on blood flow simulation", 2nd International Sysmposium on Computational Biofluid 2020.
Narendra Kurnia Putra, Pramudita Satria Palar, Hitomi Anzai, Koji Shimoyama, Makoto Ohta. (2017), "Response Surface based Analysis to Improve the Intravascular Stent Design Performance on Optimizing Wall Shear Stress Conditions"., Transactions of Japanese Society for Medical and Biological Engineering 55, p. 415.
TAS PUNGGUNG UNTUK PENGUJIAN BEBAN SECARA DINAMIS DAN STATIS, Registered Patent - on going process
Peran Simulasi Komputasional dalam Instrumentasi Biosistem, Knowledge Sharing Badan Kejuruan Teknik Fisika, Persatuan Insinyur Indonesia, 1 November 2022.
Basic and Applied Nanotechnology: Challenges on Application of Nanostructured Biomaterials for Health, ITB Graduate School. Sept 2021.
Summer School on Future Mathematics and Its Applications, Dept. of Mathematics, ITB. July 2021
Arifin Wardiman Award (co-author), The 7th International Conference of Instrumentation, Control, and Automation (ICA) 2021.
Best Oral Presentation I, Bandung Applied Biomedical and Technology in Health Conference (BABTECH) 2019.
Best Paper Award, 2017 5th International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering (ICICI-BME).