Journal Publication
A. Bute, S. Jena, R.K. Sharma, Jagannath, D.V. Udupa, N. Maiti, ”Linear and non-linear optical properties of boron carbide thin films”, Applied Surface Science 608 (2023) 155101
V. Nagar, R. Kar, L. Pansare-Godambe, N. Chand, A. Bute, D. Bhale, A.V.S.S.N. Rao, R. Shashidhar, N. Maiti, ”Evaluation of virucidal efficacy of cold plasma on bacteriophage inside a three-layered sterilization chamber”, Plasma Chemistry & Plasma Processing, published online https://doi.org/10.1007/s11090-022-10269-9 (2022)
Vanya Goel, Rajib Kar, Amitava Roy, D. S. Patil, N. Maiti, Optimization of Spatial Parameters of a 2.45-GHz Atmospheric Pressure Cold Plasma Jet: Comparison Between Multiphysics Simulation and Experimental Results, IEEE Transaction on Plasma Science, Vol. 50, No. 10, OCTOBER 2022
Priti Singh, A. Majumder, A. Pulhani, G. Sridhar, N. Maiti, ”Development of a one-dimensional electrostatic Particle-in-Cell Code”, IEEE Transactions on Plasma Science, 49 (2021), pp 3257-3267
V. Goel, A. Roy, N. Maiti, ”Performance optimization of indirectly heated cathode based electron gun by controlling high voltage surface flashover and beam positioning at target plane”, Vacuum 196 (2021), 110759
Shreya Sarkar, Rajib Kar, Jayanta Mondal, Love Mishra, Jayaprakash D, N. Maiti, Rashmi Tripathi, Debabrata Biswas, ”Enhancement of field emission performance of graphene nanowalls: the role of compound cathode architecture and anode proximity effect”, Carbon Trends 2 (2021).
A. Bute, V. Nagar, R. Kar, N. Chand, D. Bhale, R. Shashidhar, D. S. Patil, A.V.S.S. Narayana Rao, N. Maiti, ”Effect of water vapour on the virucidal behaviour of RF-hollow cathode cold plasma: A study by optical emission spectroscopy”, IEEE Transactions on Plasma Science, 49 (2021), pp 2774-2784
Sunita Kedia, Sunil Kumar Bonagani, Ananda Guha Majumdar, Vivekanand Kain, Mahesh Subramanian, N. Maiti, J. Padma Nilaya, ”Nanosecond laser surface texturing of type 316L stainless steel for contact guidance of bone cells and superior corrosion resistance”, Colloid and Interface Science Communications, 42 (2021).
Pankaj S. Kolhe, Pallavi Mutadak, N. Maiti, Kishor M. Sonawane, ”Synthesis of WO3 nanoflakes by hydrothermal route and its gas sensing application”, Sensors and Actuators A: Physical, 304 (2020).
R. Kar, N. Chand, A. Bute, N. Maiti, A. V. S. S. Narayan Rao, V. Nagar, R. Shashidhar, D. S. Patil, S. K. Ghosh, A. Sharma, ”Cold Plasma: Clean Technology to Destroy Pathogenic Micro organisms”,5 (2020), pp 327-331
Kashmira Harpale, Pankaj Kolhe, Prashant Bankar, Ruchita Khare, Sandip Patil, N. Maiti, M.G. Chaskar, Mahendra A. More, Kishor M. Sonawane, ”Multifunctional characteristics of polypyrrole-zinc oxide (PPy-ZnO) nanocomposite: Field emission investigations and gas sensing application”, Synthetic Metals, 269 (2020).
Rajib Kar and N. Maiti, ”Observation of D band splitting in vertically aligned graphene nanowalls and their evolution with laser power during Raman spectroscopy”, 23 (2020).
Vanya Goel, Amitava Roy, N. Maiti, ”A Novel Technique for Optimizing 270 deg Bent Electron Gun for Evaporation Applications”, IEEE Trans on plasma Science, 48 (2020), pp 3098-3108
Pankaj S. Kolhe, Sunil G. Kulkarni, N. Maiti, Kishor M. Sonawane, ”Effect of Cu doping concentration on H2S gas-sensing properties of Cu-doped Sno2 thin films”, Applied Physics A, 125 (2019).
Pankaj S. Kolhe, Alpana B. Shinde, S.G. Kulkarni, N. Maiti, Pankaj M. Koinkar, Kishor M. Sonawane, ”Gas sensing performance of Al doped ZnO thin film for H2S detection”, Journal of Alloys and Compounds 748 (2018) pp 6-11
Pankaj S. Kolhe, Alpana B. Shinde, S.G. Kulkarni, Namita Maiti, Pankaj M. Koinkar, Kishor M. Sonawane, ”Gas sensing performance of Al doped ZnO thin film for H2S detection”, Journal of Alloys and Compounds 748 (2018) pp 6-11 (Details)
Pankaj S. Kolhe, Parisee S. Shirke, Namita Maiti, Mahendra A. More, Kishor M. Sonawane. ”Facile Hydrothermal Synthesis of WO3 Nanoconifer Thin Film: Multifunctional Behavior for Gas Sensing and Field Emission Applications”, Journal of Inorganic and Organometallic Polymers and Materials, https://doi.org/10.1007/s10904- 018-0962-0 (2018). (Details)
Pankaj S. Kolhe, Pankaj M. Koinkar, Namita Maiti, Kishor M. Sonawane, ”Synthesis of Ag doped SnO2 thin films for the evaluation of H2S gas sensing properties”, Physica B 524 (2017) 9096 (Details)
Namita Maiti, Abhijeet Bade, G. U. Tembhare, D. S. Patil, and K. Dasgupta, ”Design and development of improved indirectly heated based strip electron gun”, Review of Scientific Instruments 86, 026105 (2015), 20 February (2015) (Details)
Namita Maiti, K. Lijeesh, U. D. Barve, Nishad Quadri, G. U. Tembhare, S. Mukherjee, K. B. Thakur, and A. K. Das, A new design of indirectly heated cathode based strip type electron gun, Review of Scientific Instruments, 84, 083302 (2013) published online August (2013) (Details)
Namita Maiti, U. D. Barve, Shakti Kumar Mishra, M. S. Bhatia, and A. K. Das, "Attenuation of electron gun generated surges in an electron beam evaporation system using ferrite beads", Vacuum, 86 (2012), pp 1810 - 1814 (Details)
Namita Maiti, U. D. Barve, M. S. Bhatia, and A. K. Das, Design of transverse electron gun for electron beam based reactive evaporation system, Review of Scientific Instruments, Review of Scientific Instruments, vol.82, no.5, pp.056106-056106-3, May (2011) (Details)
Namita Maiti, S. Mukherjee, Bhunesh Kumar, U. D. Barve, V. B. Suryawanshi, and A.K. Das, Design and development of indirectly heated solid cathode for strip type electron gun, Rev. Sci. Instrm, 81, 2010 (Jan). (Details)
Namita Maiti, A. Biswas, R. B. Tokas, D. Bhattacharyya, S. N. Jha, U. P. Deshpande U. D. Barve, M. S. Bhatia and A. K. Das , Effects of Oxygen flow rate on microstructure and optical properties of Aluminum oxide films deposited by electron beam evaporation technique, Vacuum, 85 (2010), pp 214-220. (Details)
Santalal Mukherjee, Namita Maiti, U. D. Barve, A. K. Das, An indirectly heated solid cathode for linear electron beam emitter assembly, Vacuum, 84, 2010, pp 920-923. (Details)
Namita Maiti, P. Karmakar, U. D. Barve, A V Bapat, ”An Evaporation System for Film Deposition Using Electron Beam Sources”, International Symposium on Vacuum Science and Technology, Journal of Physics: Conference Series 114 (2008) 012049. (Details)
Pallab Karmakar, Namita Maiti, A V Bapat, ”Design and Performance of Differential Pumping System of Coating Unit”, International Symposium on Vacuum Science and Technology, Journal of Physics: Conference Series 114 (2008) 012069. (Details)
N. Maiti, U. B. Desai and A. K. Ray, Application of Mathematical Morphology in Measurement of Droplet Size Distribution in Dropwise Condensation, Thin Solid Films, 376 (2000), pp 16-25, November, 2000 (Details)
Book Chapter
Rajib Kar, A. Bute, N. Chand, Z. Ahmed, N. Maiti, and D. S. Patil, “Removal of Radioactive Waste by Non-thermal Plasma Etching: Trends for the Promising Future”, Handbook of Environmental Materials Management (ed: C.M. Hussain), Springer (2020)
Conference Publication
Vanya Goel, Amitava Roy, N. Maiti, ”3-D Analysis of Electron Beam Shape at Target Plane through Parametric Variation of an Indirectly Heated Cathode-based Electron Gun”, 14th Intl Conf on Electron Beam Technologies (EBT-22), Institute of Electronics, Varna, Bulgaria, June 2022.
P. Singh, G. Sridhar, N. Maiti, ”Two-dimensional PIC simulation of ion-extraction process in an electrostatic field using different electrode configurations”, 14th Intl Conf EBT-2022, 26th June - 1st July 2022, Varna, Bulgaria.
Vanya Goel, Amitava Roy, N. Maiti, ”Characterization of Electron Beam of Indirectly Heated Cathode-Based Electron Gun”, Proceedings of DAE-BRNS International Symposium on Vacuum Science and Technology and its applications in Accelerators (VSTAA-2022), Bhabha Atomic Research Centre February 16-19, 2022.
A. Bute, D. Bhale, N. Chand, M. Shafeeq, P. Kumar, N. Maiti, ”Effect of power coupled to the plasma on the colour and structure of Zirconium Nitride thin films deposited by reactive RF magnetron sputtering” Proceedings of DAE-BRNS International Symposium on Vacuum Science and Technology and its applications in Accelerators (VSTAA-2022), Bhabha Atomic Research Centre February 16-19, 2022.
Rajib Kar, Naresh Chand, Arundhati Bute, Manish Pandey, Ashish Kumar Srivastava and N. Maiti, ”Using Low Pressure Capacitively Coupled Plasma (CCP) for Thin Film to Agriculture: Importance of the Level of Vacuum”, Proceedings of DAE-BRNS International Symposium on Vacuum Science and Technology and its applications in Accelerators (VSTAA-2022), Bhabha Atomic Research Centre February 16-19, 2022.
Devendra Bhale, Jitendra Bahadur, Arup Biswas, Dibyendu Bhattacharyya, N. Maiti, “Stoichiometric correction to improve and optimize optical properties of CZTS absorber layer for solar cell application”, Proceedings of DAE-BRNS International Symposium on Vacuum Science and Technology and its applications in Accelerators (VSTAA-2022), Bhabha Atomic Research Centre February 16-19, 2022.
Devendra Bhale, Arup Biswas, Dibyendu Bhattacharyya, N. Maiti, ”Optical Characterization of CZTS Layer for solar cell application”, 65th DAE Solid State Physics Symposium (DAE SSPS 2021), December 15-19, 2021
Arundhati Bute, Shuvendu Jena, Naresh Chand, D. V. Udupa, and N. Maiti, ”Effect of dc Self-bias on Residual Stress of PECVD Deposited natBxC Thin Films”, 65th DAE Solid State Physics Symposium (DAE SSPS 2021),December 15-19, 2021
Vanya Goel, Amitava Roy, N. Maiti, ”3-D Particle Trajectory Tracking and Characterization of Electron Beam Parameters of High Power Electron Gun”, 2nd IEEE International Conference on Electrical Power and Energy Systems (ICEPES-2021) DOI
P. Singh, G. Sridhar and N. Maiti, “Performance Improvement of a 1DESPIC Particle-in-Cell Code using Adaptive Mesh”, pp. 70, 14th International Conference on Plasma Science and Applications (ICPSA-2020), 28th – 30th December, 2021, Nanjing, China
P. Singh, G. Sridhar and N. Maiti, “A Two Dimensional Particle-In-Cell Simulation Code for Pulsed Plasma in an Electrostatic Field”, pp. 58, 13th International Conference on Plasma Science and Applications (ICPSA-2020), 26th – 28th December, 2020, Cuttack, India.
Vanya Goel, Amitava Roy, N. Maiti, “Study on Flashover Due To Surface Plasma on High Voltage Insulators”, in 13th Int. Conf. on Plasma Science and Applications (ICPSA), Ravenshaw University, Cuttack, Dec. 2020.
Vanya Goel, Romesh Chandra, Amitava Roy and N. Maiti, ”Electrostatically and Electromagnetically Focused 60kW Electron Gun for High Voltage Applications”, International Conference on Convergence to Digital World, IEEE ICCDW (2020).
Priti Singh, A. Majumder, Dr. A. K. Pulhani, Dr. G. Sridhar and Dr. N. Maiti, ”Methods of High-Density Plasma Generation”, International Conference on Convergence to Digital World, IEEE ICCDW (2020).
S. Kedia, M. Pandey, P. Suprasanna, N. Maiti, “Effect of Pre-sowing Laser Treatment on Germination of Mungbean (Vigna radiate L.) under Salinity Stress, DAE-BRNS National Laser Symposium (NLS-28), VIT, Chennai, Jan 8-11 (2020).
Namita Maiti, B. Dikshit, G. K. Bhowmick, Siddhesh S. Chavan, G. U. Tembhare, “Modified design of indirectly heated cathode based strip electron gun”, National Symposium on Vacuum Technology and its application to Electron beams, IVSNS-2015, TIFR, Mumbai, Nov 18-20 (2015).
B. Dikshit, N. Maiti, G.K. Bhowmick, “A practical method for attaining uniformity in temperature of solid cathode in indirectly heated strip type electron gun”, National Symp on Vacuum Tech and its application to Electron beams, IVSNS-2015, TIFR, Mumbai, Nov, 18-20 (2015)
P. S. Kolhe, P. K. Bankar, D. S. Gavhane, K. M. Sonawane, N. Maiti, M. A. More, “Synthesis of Bismuth Tungstate (Bi2W06) Nanoflakes and their field emission investigation”, AIP Conf Proc. 1731, 120029-1-120029-3, DAE Solid State Physics Symposium (2015)
N. Maiti, K. B. Thakur, D. S. Patil and A. K. Das, “High voltage breakdown studies in electron gun and its damage control”, Proc. XXVI Int.symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV-2014), pp 37-39
N. Maiti, K. B. Thakur, D. S. Patil and A. K. Das, “Design of indirectly heated thoriated tungsten cathode based strip electron gun”, Proc. XXVI Int.Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV-2014), pp 589-59
Deposition of boron thin film by using electron beam evaporation technique, by Namita Maiti, U.D. Barve, Jaganntah, S.Mukherjee, M.S. Bhatia, A.K. Das, Orally presented at National Conference on Recent Advances in Surface Engineering (RASE 09), NationalAerospace Laboratories, Bangalore, 26-27 Feb2009.
N. Maiti, P. Mathe, S. P. Duttagupta, U. D. Barve, P. Karmakar, A. V. Bapat and A. K. Ray, Design of Electron Gun and the Beam Transport for 24 kW, 90 kV Electron Beam Welder with Large Work Chamber, Proc. for poster presented in the Indian Particle Accelerator Conference InPAC-2006 held at Mumbai during 1-4 November 2006.
Namita Maiti, U.D. Barve, P. Karmakar, A. V. Bapat, A.K. Sinha and A.K. Ray, Design of Indirectly Heated Cathode Based Axial Gun for Electron Beam Welding Machine poster presented in the national conference SEBTA-05 held at Mumbai during 28-30th September 2005.
P. Karmakar, N. Maiti, A. V. Bapat, A.K. Sinha and A.K. Ray, Thermal Analysis of Solid Cathode Holder Assembly of Indirectly Heated Cathode EB Welding Gun poster presented in the national conference SEBTA-05 held at Mumbai during 28- 30th September 2005 this paper has been awarded the best paper in the poster session of thermal electron beam.
S.S. Khirwadkar , N. Maiti , P.M. Raole , P. Santra , P. Chaudhuri , A. Prakash , U. D. Barve , N. Chauhan , A.K.Sinha, L.M. Gantayet , Y.C. Saxena , Experiments on joining graphite to copper for plasma facing components of tokamak, orally presented at National Conference IVSNS-05 at IPR, Gandhinagar, during November2005
10 kW Electron Beam Evaporation System for Optical and Hard Coating Experiments by N. Maiti, U. D. Barve, A. K. Sinha and A. K. Ray, oral paper presented in the National Symposium on Vacuum Science & Technology and Vacuum Metallurgy (IVSNS-2003), held at BARC, Mumbai, Oct2003.
N. Maiti, U. D. Barve, A. K. Sinha and A. K. Ray, 10 kW Electron Beam Evaporation System for Optical and Hard Coating Experiments, Oral paper presented in the National Symposium on Vacuum Science & Technology and Vacuum Metallurgy (IVSNS-2003), held at BARC, Mumbai, 15-17th October, 2003.
A. K. Ray, Namita Maiti, EB Thermal Processing in India presented at IndoBulgarian Workshop on Electron Beam Technology and Applications, BARC, Mumbai, 19-21st November, 2003.
N. Maiti, U. D. Barve and A. K. Ray, Characterization of an Indigenously Developed 9 kW Electron Beam Evaporation System for Thin Film Coating Applications , in Proc. PBAMP-2002 held in BARC, Mumbai, September, 2002.
A. K. Ray, A. K. Sinha, P. M. Varghese, Namita Maiti, M. L. Mascarenhas, Kandaswamy, Current trends in EB Evaporation, in Proc. Applications of Plasmas, Lasers and Electron Beams in Advanced Materials Processing (PBAMP-2002) held in BARC, Mumbai, September, 2002.
N. Maiti, A. R. Dixit, U. D. Barve and A. K. Ray, The effect of Electron Beam Evaporation Due to Beam Oscillation, Proc. National Symposium on Electron Beam Technology and Applications edited by A. K. Sinha, November, 2000.
N. Maiti, A.K. Ray and N. Venkatramani, Development of 6 kW Electron Beam Evaporation System Proc. National Symposium on Vacuum Science & Technology (IVSNS-99), held at CAT, Indore, 24-26th November, 1999.
N. Maiti, U. B. Desai and A. K. Ray, Application of Mathematical Morphology in Measurement of Droplet Size Distribution in Dropwise Condensation International/National Conference on Digital Image Computing, Techniques and Applications (DICTA-99), held at Curtin University, Australia, 7-8th December, 1999.
N. Maiti, U. B. Desai, A. K. Ray and L. M. Gantayet, Mathematical Morphology : An Image Processing Tool in Measurement of Drop Size in Dropwise Condensation Proc. Indian Conference on Computer Vision, Graphics and Image Processing (ICVGIP-98), held at IIT, Delhi, 21-23rd December, 1998.
N. Maiti, P. Y. Khan, A. K. Ray and U. K. Chatterjee, Strip Beam Gun Design Using Computer Simulation, Proc. National Symposium on Vacuum Science & Technology and Power Beams (IVSNS-97), held at BARC, Mumbai, 19-21st, November, 1997.
T. K. Saha, Namita Maiti, M. Mascarenhas etal, Problems Encountered During Operation and Maintenance of Indigenously Developed Electron Beam Welder Their Solutions, Proc. National Symposium on Vacuum Science & Technology and Power Beams (IVSNS-97), held at BARC, Mumbai, 19-21st November, 1997.
J. Mukherjee, K. K. Mishra, P. Anupama, N. Maiti etal, Study of Underside Condensation of Liquid Metal on a Partially Wettable Substrate, Proc. ISHMT-ASME Heat and Mass Transfer Conference, held at IIT Kanpur, December, 1997.
Maiti N., Desai U.B. and Chaudhuri S., A New Method for Rotation and Translation Invariant Fault Detection in PCBs, Proc. Indian Conference on Pattern Recognition, Image Processing & Computer Vision (ICPIC-95), held at IIT Kharagpur, 13-15th December, 1995.
. A. K. Ray, A. K. Sinha, A. V. Bapat, P. M. Varghese, P. T. Raju, N. Maiti, M. Mascarenhas and T. K. Saha, Indigenous Development of Electron Beam Welding Equipment in B. A. R. C., Proc. National Symposium on Joining of Materials, held at IIW, Tiruchirapalli, September, 1996.
A. V. Thakur, A. K. Ray, A. K. Sinha, P. M. Varghese, P.T. Raju, N. Maiti and T. K. Saha, Development of Electron Beam Welding Equipment at B.A.R.C, held at IIW, Tiruchirapalli, December,1991.
Namita Maiti and A. K. Sinha, Automation of the Vacuum System, Proc. National Symposium on Real Time Applications of Computers, held at IGCAR, Kalpakkam, December, 1990.