Pulls

Pulls

Click on the graphic area on the left to add an image for display on the SETTINGS TAB.

Click the BROWSE Buttons to use pulls created in Sketchup in all renderings. This will add a tremendous amount of detail to your renderings. (If your computer runs slow, we recommend you do this as one of the last steps in creating your final drawings as it it will slow the generation of the renderings in Sketchup considerably.)

Click Add to add a new item

Click Delete to delete the selected item

Click Rename to change the name of the selected item

Click Export to export the selected item to a file

Click Import to import a hardware item

Use the Units selector to change between mm and inches.

Vertical - Horizontal Pulls

Handles may be designated as Vertical or Horizontal. Horizontal may be centered or specify an offset.

Pulls (Handles / Knobs) Drilling Information

Enter the hole diameter and hole center line for drawer pulls. Pulls will be automatically centered on the drawer front. (See below to place them off center)

For placement on the Doors, enter the enter of the handle as well as the offset from the door edge.

Place Drawer Pull Off Center

Enter dimensions in this category to place your drawer pull off center.

Double Drawer Pulls

To place more than one pull on oversized drawers.

Enter the minimum width for the drawer to add a second pull, then enter the distance from the edge of the drawer to the pull.