Reviews & Publications 

2.1. Journal Publications

[1]        M.M. Quazi, M. Ishak, M. A. Fazal, A. Arslan, Saeed Rubaiee, Abdullah Qaban, M.H. Aiman, T. Sultan, M.M. Ali, S.M. Manladan. (2020). Current research and development status of dissimilar materials laser welding of Titanium and its alloys. Optics and Laser Technology. 126. https://doi.org/10.1016/j.optlastec.2020.106090. (ISI IF: 3.2)

[2]         M. M. Quazi, M. Ishak, M. A. Fazal, A. Arslan, Saeed Rubaiee, M. H. Aiman, Abdullah Qaban, Farazila Yusof, T. Sultan, M. M. Ali & S. M. Manladan. (2020). A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications. Critical Reviews in Solid State and Materials Sciences. https://doi.org/10.1080/10408436.2019.1708701. (ISI IF: 6.5)

[3]        A. Arslan, H H Masjuk, M. M. Quazi. (2019). Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express. 6(10) https://doi.org/10.1088/2053-1591/ab408c. (ISI IF: 1.4)

[4]        M. N. M. Salleh, M. Ishak M. H. Aiman M. M. Quazi and A. M. Hanafi, Weld Geometry Investigation on Dissimilar Boron Steel Laser Welded for TWB Application. (2019). International Journal of Automotive and Mechanical Engineering. 16(4). https://doi.org/10.15282/ijame.16.4.2019.12.0546. (SCOPUS SJR: 0.29)

[5]         I. Ali, M.M. Quazi, E. Zalnezhad, Ahmed A.D.Sarhan, N. Liana Sukiman, M. Ishak. (2019). Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals. 72(10). https://doi.org/10.1007/s12666-019-01754-5. (ISI IF: 0.9)

[6]        Ali, I., Lin, N., Quazi, M.M., Bashir, M.N., Sadiq, H. and Sharaf, F. (2019). Investigating the wear characteristics of metal matrix composite coating deposited on AA5083 Al-alloy by laser surface engineering technique. North American Academic Research.3(1). https://doi.org/10.5281/zenodo.3626448.

[7]        A. Arslan, H.H. Masjuki, M.A. Kalam, M. Varman, M.H. Mosarof, Riaz A. Mufti, M.M. Quazi. (2019). Wear characteristics of patterned and un-patterned tetrahedral amorphous carbon film in the presence of synthetic and bio based lubricants. Materials Research Express. 6(3). https://doi.org/10.1088/2053-1591/aaf74d. (ISI IF: 1.4)

[8]        K.I. Yaakob, M. Ishak, M.M. Quazi, M.N.M Salleh. (2019). Optimizing the pulse wave mode fibre laser welding parameters of 22Mnb5 boron steel using response surface methodology. Measurements. 135. https://doi.org/10.1016/j.measurement.2018.10.035. (ISI IF: 2.2)

[9]        M.N.M. Salleh, M. Ishak, M.M. Quazi. (2018). Employment of low power fibre laser technology for micro welding of AZ31B Mg alloy in double fillet lap joint configuration. International Journal of Advanced Manufacturing Technology. 99(1-4).  https://doi.org/10.1007/s00170-018-2529-1. (ISI IF: 2.6) 

[10]     M.M. Quazi, M. Ishak, A. Arslan, Imran Ali,. (2018). Investigating the mechanical and tribological properties of Ni-WC-Graphite hybrid MMC coating deposited on Al–17Si by laser composite surfacing. RSC Advances, 8(13). DOI: 10.1039/C7RA08191J . (ISI IF: 3.1)

[11]     K.I. Yakoob, M. Ishak, M.M. Quazi. (2017). Characterization of heat-treated gas metal arc-welded boron steel sheets. International Journal of Advanced Manufacturing Technology, 94(1-4). https://doi.org/10.1007/s00170-017-0903-z. (ISI IF: 2.6)

[12]     A. Arslan, H.H. Masjuki, M.A. Kalam, M. Varman, M.H. Mosarof, Riaz A. Mufti, M.M. Quazi. (2017). Investigation of laser texture density and diameter on the tribological behavior of hydrogenated DLC coating with line contact configuration. Surface and Coatings Technology, 322. https://doi.org/10.1016/j.surfcoat.2017.05.037. (ISI IF: 2.1)

[13]     M.M. Quazi, M. Ishak, A. Arslan, M.N. Bashir, Imran Ali. (2017). Scratch adhesion and wear failure characteristics of PVD multilayer CrTi/CrTiN thin film ceramic coating deposited on AA7075-T6 aerospace alloy Journal of Adhesion Science & Technology. 32(6). https://doi.org/10.1080/01694243.2017.1373988. (ISI IF: 1.0)

[14]     Quazi, M. M., Fazal, M. A., Haseeb, A. S. M. A., Yusof, F., Masjuki, H. H., & Arslan, A. (2016). Laser composite surfacing of Ni-WC coating on AA5083 for enhancing tribo-mechanical properties. Tribology Transactions, 60(2), https://doi.org/10.1080/10402004.2016.1158891. (ISI IF: 1.6) 

[15]     Quazi, M. M., Fazal, M. A., Haseeb, A. S. M. A., Yusof, F., Masjuki, H. H., & Arslan, A. (2016). Laser-based Surface Modifications of Aluminum and its Alloys. Critical Reviews in Solid State and Materials Sciences, 41(2), https://doi.org/10.1080/10408436.2015.1076716. (ISI IF: 6.5)

[16]     Quazi, M. M., Fazal, M. A., Haseeb, A. S. M. A., Yusof, F., Masjuki, H. H., & Arslan, A. (2016). Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. Journal of Rare Earths, 34(6), https://doi.org/10.1016/S1002-0721(16)60061-3. (ISI IF: 2.2) 

[17]     Quazi, M. M., Fazal, M. A., Haseeb, A. S. M. A., Yusof, F., Masjuki, H. H., & Arslan, A. (2016). A Review to the Laser Cladding of Self-Lubricating Composite Coatings. Lasers in Manufacturing and Materials Processing, 3(2), https://doi.org/10.1007/s40516-016-0025-8. (SCOPUS SJR: 0.35)

[18]     Arslan, A., Hassan, M., Kalam, M., Varman, M., Mufti, R., Mosarof, M., . . . Quazi, M.M. (2016). Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review Critical Reviews in Solid State and Materials Sciences. 41(6). https://doi.org/10.1080/10408436.2016.1186597. (ISI IF: 6.5)

[19]     Arslan, A., Masjuki, H. H., Varman, M., Kalam, M. A., Quazi, M. M., & Mosarof, M. H (2016). Effect of change in temperature on the tribological performance of micro surface textured DLC coating. Journal of Materials Research. 31(13). https://doi.org/10.1557/jmr.2016.12. (ISI IF: 1.5)

[20]     Bhatti, J., Fazal, M. A., Bushroa, A. R., Faheem Khan, A., & Quazi, M.M. (2016). Investigation of the mechanical properties of electrodeposited nickel and magnetron sputtered chromium nitride coatings deposited on mild steel substrate. Journal of Adhesion Science & Technology. 30(20). https://doi.org/10.1080/01694243.2016.1178027. (ISI IF: 1.0)

[21]     Bhatti, J., Fazal, M. A., Bushroa, A. R., Faheem Khan, A., & Quazi, M.M. (2016). Structural and mechanical properties of (Cr, Ni) N single and gradient layer coatings deposited on mild steel by magnetron sputtering. Tribology - Materials, Surfaces & Interfaces. 10(3). https://doi.org/10.1080/17515831.2016.1204106. (ESCI, SCOPUS SJR: 0.33) 

[22]     Arslan, A., Masjuki, H. H., Varman, M., Kalam, M. A., Quazi, M. M., Al Mahmud, K. A. H., . . . Habibullah, M. (2015). Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition. Applied Surface Science. 356. https://doi.org/10.1016/j.apsusc.2015.08.194. (ISI IF: 3.3)

[23]     Mehran, Q. M., Bushroa, A. R., Fazal, M. A., & Quazi, M. M. (2015). Scratch adhesion characteristics of PVD Cr/CrAlN multilayer coating deposited on aerospace AL7075-T6 alloy. Pigment & Resin Technology, 44(6). https://doi.org/10.1088/1757-899X/342/1/012020. (ISI IF: 0.6)

[24]     Ezazi, M. A., Quazi, M. M., Zalnezhad, E., & Sarhan, A. A. D. (2014). Enhancing the tribo- mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings Ceramics international, 40(10), https://doi.org/10.1016/j.ceramint.2014.07.067. (ISI IF: 2.9)

2.2. Conference Proceedings

[1]        H. Tarizan, M. Ishak, M.M. Quazi, A. Qaban. (2019). Friction stir welding of AZ31b magnesium alloy with er4043 aluminium alloy filler. Proceedings of ARSSS International Conference. , Oxford, UK, 18th November, 2019  (http://www.worldresearchlibrary.org/up_proc/pdf/3393-15774392711-3.pdf

[2]        Qaban, M.M. Quazi, Sumsun Naher. (2019). The inhibition effect of tannic acid on corrosion behaviour of HSLA steel in pure water. Proceedings of ARSSS International Conference. , Oxford, UK, 18th November, 2019  (http://www.worldresearchlibrary.org/up_proc/pdf/3393-15774393604-6.pdf)

[3]         A J Sulaiman, Y Erny A M Y, Aiman M H, M Ishak, M M Quazi, T Ariga. (2019). Enhancement of Mechanical properties of Copper Brazed Joint by Laser Surface Modification. 5th International Conference on Mechanical Engineering Research (ICMER 2019).

[4]        M. N. M. Salleh, M. Ishak, M. H. Aiman, A. Q. Zaifuddin, M. M. Quazi, (2019). The Effect of Laser Surface Hardening on Surface Hardness of Mild Steel. 5th International Conference on Mechanical Engineering Research (ICMER 2019).

[5]        Q. Zaifuddin, M. H. Aiman, M Ishak, M. M. Quazi, T Ariga, (2019). Effect of Laser Surface Modification (LSM) on Laser Energy Absorption for Laser Brazing. 5th International Conference on Mechanical Engineering Research (ICMER 2019).

[6]        Arslan, A., Masjuki, H., Varman, M., Kalam, A., Mufti, R., Gulzar, M., & Quazi, M.M. (2015). Effect of surface texture on the tribological performance of DLCs coating. Proceedings of Malaysian International Tribology Conference (MITC 2015).

[7]        M.M. Quazi, M.A. Fazal, A.S.M.A Haseeb, H.H. Masjuki, E. Zalnezhad. (2014). Adhesion of PVD multilayer ceramic coating on AA7075-T6 aerospace alloy. Proceedings of 3rd MJIIT-JUC Joint International Symposium. (MJIIS 2014).