Publications

  1. R. Selva Bharathi, N. Siva Shanmugam, R. Murali Kannan and S. Arungalai Vendan, Studies on the Parametric Effects of Plasma Arc Welding of 2205 Duplex Stainless Steel, High Temperature Materials and Processes, https://doi.org/10.1515/htmp-2016-0087 Impact factor - 0.349

  2. V Dhinakaran, N Siva Shanmugam and K Sankaranarayanasamy, Experimental investigation and numerical simulation of weld bead geometry and temperature distribution during plasma arc welding of thin Ti-6Al-4V sheets, The Journal of Strain Analysis for Engineering Design, Vol. 52 Issue 1, 2017, pp. 30-44 Impact Factor – 1.250

  3. A. Karpagaraj, N. Siva Shanmugam and K. Sankaranarayanasamy, Studies on mechanical behavior and microstructural analysis of tailor welded blanks of Ti-6Al-4V titanium alloy sheet, Journal of Materials Research, Vol. 34 Issue 11, 2016, pp. 2186-2196 Impact Factor – 1.579

  4. Nalajam Pavan Kumar, S Arungalai Vendan and N Siva Shanmugam, Investigations on the parametric effects of cold metal transfer process on the microstructural aspects in AA6061, Journal of Alloys and Compounds, Vol. 658, 2016, pp. 255-264 Impact Factor – 3.014

  5. K. Devendranath Ramkumar, Debidutta Mishra, B. Ganesh Raj, M.K. Vignesh, G. Thiruvengatam, S.P. Sudharshan, N. Arivazhagan, N. Sivashanmugam and Arul Maximus Rabel, Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750, Materials & Design (1980-2015), Vol. 66, Part A, 2015, pp. 356-365 Impact Factor – 3.997

  6. K Devendranath Ramkumar, Jelli Lakshmi Narasimha Varma, Gangineni Chaitanya, S Logesh, Madhav Krishnan, N Arivazhagan and N Siva Shanmugam, Experimental investigations on the SiO2 flux-assisted GTA welding of super-austenitic stainless steels, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7876-6 Impact Factor – 1.568

  7. V Dhinakaran, N Siva Shanmugam and K Sankaranarayanasamy, Some studies on temperature field during plasma arc welding of thin titanium alloy sheets using parabolic Gaussian heat source model, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi: 10.1177/0954406215623574 Impact Factor – 0.734

  8. A. Karpagaraj, N. Siva Shanmugam and K. Sankaranarayanasamy, Some studies on mechanical properties and microstructural characterization of automated TIG welding of thin commercially pure titanium sheets, Materials Science and Engineering: A, Vol. 640, 2015, pp. 180-189 Impact Factor – 2.567

  9. K, Devendranath Ramkumar, Jagat Sai, Sridhar Gundla, Santhosh Reddy, P. Prabaharan, N, Arivazhagan and N. Siva Shanmugam, Influence of filler metals in the control of deleterious phases during the multi-pass welding of Inconel 718 plates, Acta Metallurgica Sinica (English Letters), Volume 28, Issue 2, 2015, pp. 196-207 Impact Factor – 0.426

  10. Vijaikrishnan V, Ramakrishnan M and N. Siva Shanmugam, Steady state analysis of regular hollow pyramidal radiating fin with triangular cross-section, Thermal Science, Volume 19, Issue 1, 2015, Pages: 59-68 Impact Factor: 0.962

  11. N. Siva Shanmugam, G. Buvanashekaran and K. Sankaranarayanasamy, Experimental Investigation and Finite Element Simulation of laser lap welding of SS304 sheets, International Journal of Mechanics, Issue 2, Volume 7, 2013, Pages: 120-127.

  12. N. Siva Shanmugam, G. Buvanashekaran and K. Sankaranarayanasamy, Some studies on weld bead geometries for laser spot welding process using finite element analysis, Materials & Design, Volume 34, February 2012, Pages 412-426. Impact Factor: 3.997

  13. Jaganathan Maniraj, Velappan Selladurai, Nallathambhi Sivashanmugam, Subbiah Arungalai Vendan, Jacob Mathew, Experimental Investigation on Effect of Tool Crater Wear and Surface Roughness in TiN Coated WC Tool While Machining Martensitic Stainless Steel, High Temperature Materials and Processes, Volume: 30, Issue: 3, 2011, Pages: 257-265. Impact Factor: 0.377

  14. Jaganathan Maniraj, Velappan Selladurai, Nallathambhi Sivashanmugam, Subbiah Arungalai Vendan, Mayilswamy, Hard Finish Turning Parameters Optimization for Machining of High Temperature Stainless Steel, High Temperature Materials and Processes, DOI: 10.1515/htmp-2011-0142, June 2012. Impact Factor: 0.377

  15. N. Siva Shanmugam, G. Buvanashekaran, K. Sankaranarayanasamy & S. Ramesh Kumar, A transient finite element simulation of the temperature and bead profiles of T-joint laser welds, Materials & Design, Volume 31, Issue 9, 2010, pp. 4528-4542. Impact Factor: 3.997

  16. N. Siva Shanmugam, G. Buvanashekaran & K. Sankaranarayanasamy, Experimental Investigation and Finite Element Simulation of Laser Beam Welding of AISI 304 Stainless Steel sheet, Journal of Experimental Techniques, Volume 34, Issue 5, 2010, pp. 25-36. Impact Factor: 0.545

  17. N. Siva Shanmugam, G. Buvanashekaran, K. Sankaranarayanasamy & K. Manonmani, Some Studies on temperature profiles in AISI 304 stainless steel sheet during laser beam welding using FE simulation, International Journal of Advanced Manufacturing Technology, Volume 43, Numbers 1-2 / July, 2009, pp. 78-94. Impact Factor: 1.568

  18. G. Buvanashekaran, N. Siva Shanmugam, K. Sankaranarayanasamy & R. Sabarikanth, A Study on Laser Welding Modes with varying Beam Energy Levels, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Volume 223, Number 5 / 2009, pp. 1141-1156. Impact Factor: 0.730

  19. J. Jaise, N. B. Ajay Kumar, N. Siva Shanmugam, K. Sankaranarayanasamy & T. Ramesh, Power system: a reliability assessment using FTA, International Journal of System Assurance Engineering and Management, DOI 10.1007/s13198-012-0100-2

  20. Georgekutty S. Mangalathu, N. Siva Shanmugam, K. Sankaranarayanasamy, T. Ramesh & K. Muthukumar, System Safety in LPG Fired Furnace – A Multi Criteria Decision Making Technique, Advances in Production Engineering & Management Journal, Volume 7, Number 2, 2012, pp. 123 – 134.

  21. Georgekutty S Mangalathu, N. Siva Shanmugam, K. Sankaranarayanasamy & T. Ramesh, Decision Making in Risk Assessment of Producer Gas Furnaces: An Integrated Approach with AHP & Promethee Techniques, Journal Manufacturing Engineering, Volume 10, Number 1, 2011, pp. 49-54.

  22. N. Siva Shanmugam, G. Buvanashekaran, K. Sankaranarayanasamy & K. Manonmani, Influence of Beam Incidence Angle in Laser Welding of Austenitic Stainless Steel Using Finite Element Analysis, Journal of Multidiscipline Modeling in Materials and Structures, Volume 5, Number 3, 2009, pp. 257-262 (6).

  23. K.R. Balasubramanian, N. Siva Shanmugam, G. Buvanashekaran & K. Sankaranarayanasamy, Numerical and experimental investigation of laser beam welding of AISI 304 stainless steel sheet, Advances in Production Engineering & Management Journal, Volume 3, Number 2, 2008, pp. 93 – 105.

  24. Georgekutty S Mangalathu, N. Siva Shanmugam, K. Sankaranarayanasamy, T. Ramesh & K. Muthukumar, System safety in LPG fired furnace – A Multi Criteria Decision Making Technique, Advances in Production Engineering and Management – Accepted for Publication.

  25. P. Sathiya, N. Siva Shanmugam, T. Ramesh & R. Murugavel Temperature distribution modeling of Friction Stir Spot Welding of AA 6061-T6 using Finite Element Technique, Journal of Multidiscipline Modeling in Materials and Structures (MMMS), Volume 4, Number 1, 2008, pp. 1-14.

  26. P. Sathiya, N. Siva Shanmugam, S. Aravindan & A. Noorul Haq, Modeling and Simulation of Submerged Arc Welding in Pipe Manufacturing process using Finite Element Analysis, IWS Journal, Weld 3, Bead 2, March 2006, pp. 17-25 (9).

  27. P. Sathiya, N. Siva Shanmugam & T. Ramesh, Orthogonal Metal Cutting of SA105 Carbon Steel - A Feasibility Study, Journal of Manufacturing Technology & Management, Volume 1, Number 1, Apr- June2007, pp. 61-68.