Journals:
1. Timur, Kazi Fahad Labib; Hossain, Tahiya; Saif, Mostofa Jahid; Azazul Haque, Srirattayawong, Sutthinan; Rahman, Md; “Experimental and Numerical Study on the Performance Evaluation of Perforated Heatsink for Improving Solar PV Systems Efficiency” submitted to Transaction of Canadian Society for Mechanical Engineering. (Under review) (Web of Science)
2. Rachaneewan Aungkurabrut, Sutthinan Srirattayawong, Sutham Arun, Wichaphon Fakkeaw, Md. Hamidur Rahman, “CFD-Enhanced Design: Dual-Propeller Advanced Dry Garbage Cleaning Machine for Efficient Plastic Waste Management” accepted for publication in the International Journal of Mechanical Engineering and Robotics Research. Manuscript ID: IJMERR-15379 (Web of Science, Scopus)
3. Ahmed, Ishtiaq; Farhin, Hossain Azmain; Hoque, Md Azazul; Miah, Md. Abdul Karim; Heme, Saziea Afrin; Rahman, Hamidur; ‘Numerical Study on Uniform Passive Cooling Configurations for Photovoltaic Modules in Hot Climatic Conditions’; accepted in the ASME Transaction of Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, (SOL-22-1325) (Web of Science) https://doi.org/10.1115/1.4067552
4. Mainuddin Khaled, Gias Kamal, Kawsar Ahmed Porosh, Mohammad Muhtasim Mashfy and Hamidur Rahman, “Experimental approach of producing biogas from fallen leaves with co-digestion” BIO Web Conf., Volume 62, 03003, pg-8, 2023, https://doi.org/10.1051/bioconf/20236203003. (Scopus)
5. Shoaib Hasan, Minhazul Alam, Afsana Akter, Imtiaz Uddin, Mainuddin Khaled and Hamidur Rahman, “Biogas production from cafeteria waste by anaerobic digestion” BIO Web Conf., Volume 62, 03001, pg-9, 2023, https://doi.org/10.1051/bioconf/20236203001.(Scopus)
6. Nazia Rodoshi Khan, Tasnuva Sharmin, Md. Azazul Haque, and Md. Hamidur Rahman “Photovoltaic thermoelectric cooling system for off-grid vaccine refrigerator: an experimental study” Transactions of the Canadian Society for Mechanical Engineering • Vol. 47 • No. 4 • pp. 596 - 617, 2023, https://doi.org/10.1139/tcsme-2023-0003 (Web of Science)
7. Md Azazul Haque, Md. Abdul Karim Miah, Shorab Hossain, M. Hamidur Rahman, "Passive cooling configurations for enhancing the photovoltaic efficiency in hot climatic conditions" published in the Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, an ASME transactions, Feb 2022, 144(1): 011009 (9 pages), Paper No: SOL-21-1091,https://doi.org/10.1115/1.4052062 (Web of Science)
8. Awais, Muhammad; Hasan, Reaz; Rahman, Md. Hamidur, "Effect of blowing ratio on Film-Cooling effectiveness of Ginkgo Shaped Holes: A numerical approach", published in Transaction of Canadian Society of Mechanical Engineering, https://doi.org/10.1139/tcsme-2021-0014 (Web of Science)
9. Muhammad Awais, Arafat A. Bhuiyan, Sayedus Salehin, Mohammad Monjurul Ehsan, Basit Khan and Md Hamidur Rahman, "Synthesis, heat transport mechanisms and thermophysical properties of nanofluids: A critical overview", published in International Journal of Thermofluids 10(4), March 2021, https://doi.org/10.1016/j.ijft.2021.100086 (Web of Science)
10. Md. Hamidur Rahman, Muhammad Awais, Sayedus Salehin, “Enhancement of Centerline Film Cooling Effectiveness by Incorporating Airfoil Deposition and Optimizing Ratios of Fluid Mechanical Variables: A CFD Approach” published in International Journal of Mechanical and Production Engineering (IJMPE), Volume 8, Issue 3, Pages 76-81,2020. DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-17062 ( Copernicus)
11. M. R. Uddin, T. S. Saniat, S. Salehin, M. H. Rahman, “Drag Based Aerodynamic Braking System for The Hyperloop” published in Transaction of Canadian Society of Mechanical Engineering, https://doi.org/10.1139/tcsme-2019-0120 (Web of Science)
12. Shadman Mahmud, Adib Adnan, Shahnoor Shamim Khan, and Md. Hamidur Rahman, “Study of incident drag response of the Hyperloop pod based on change in aerodynamic brake plate orientation” Transactions of the Canadian Society for Mechanical Engineering, 19 January 2021, https://doi.org/10.1139/tcsme-2020-0038
13. Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Numerical Study of Emission Control of Rural Kitchen for Healthy Environment” published online as accepted manuscript in the Journal of Thermal Science and Engineering Applications, a transaction of ASME. https://doi.org/10.1115/1.4043914 (Web of Science)
14. Rahman, M.,H. and Islam, S., "Effects of the Position of Kitchen Hood Suction on thermal Comfort and Carbon Dioxide Gas Emission from an Urban Residential Kitchen in Developing Countries", Applied Mechanics and Materials Vol. 819 (2016) pp 117-121 ©(2016) Trans Tech Publications, Switzerland. https://doi.org/10.4028/www.scientific.net/AMM.819.117. (Copernicus)
15. Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Numerical Study of Carbon Dioxide Gas Emission From an Urban Residential Kitchen In Developing Countries” published in the Journal of Thermal Science and Engineering Applications, a transaction of ASME, Vol:07, Issue:04, June 2015. https://doi.org/10.1115/1.4030814. (Web of Science)
16. Shahriar Shams, M Hamidur Rahman, and J. N. Sahu, “CFD Analysis of Brick Kiln Flue Gases and its Health Impact: A Case Study of Northern Part of Dhaka, Bangladesh” IUT
Journal of Engineering and Technology (Jet), Vol. 12, No. 1, June 2015.
17. Rahman, M., H., Kim. S. I, and Hassan, I., “Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing, Part 2: Effect of Unsteady Stator-Rotor Interaction” to be published in the International Journal for Computational Methods, Vol:11, Issue:02, 2013. https://doi.org/10.1142/S0219876213500588 (Web of Science)
18. Rahman, M., H., Kim, S. I., and Hassan, I., “Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing, Part 1: Effect of Tip Clearance Height and Rotation Speed” published in the International Journal for Computational Methods in Engineering Science & Mechanics. https://doi.org/10.1080/15502287.2012.725800 (Web of Science)
19. Kim, S. I., Rahman, M., H., and Hassan, I, “Effect of Turbine Inlet Temperature on Rotor Blade Tip Leakage Flow and Heat Transfer", published in the International Journal of Numerical Methods for Heat and Fluid Flow, Vol:22, Issue:01, 2012. https://doi.org/10.1108/09615531211188801 (Web of Science)
20. Rahman, M., H., and Kim, S. I., and Hassan, I, “Effects of Inlet Temperature Uniformity and Non-uniformity on the Tip Leakage Flow and Rotor Tip Blade and Casing Heat Transfer" published in the Journal of Turbomachinery, a transaction of ASME, Vol:134, Issue:2, June 2012. https://doi.org/10.1115/1.4003211 (Web of Science)
21. S. M. A Hasnine, M. H. Rahman, A. K. M. Sadrul Islam, “Numerical Modeling of Plume Dispersion around the Residential Buildings" published in the ISESCO Journal of Science and Technology, 2011.
22. M.H. Rahman, A.R. Akhanda and A.K.M. Sadrul Islam, “Study, Design and Fabrication of a Solar Powered Adsorption Refrigeration System”, published in the ISESCO Journal of Science and Technology, Vol. 2, No. 1, 2006, pg. 10-13.
Conferences:
1. Niyaz Ahmed, Sutthinan Srirattayawong, Maysha Tahsin, Shahriar Shams, Rahman Muhammad and Md. Hamidur Rahman “Numerical Modeling of Breakwater Overtopping For Plain, Converging, And Stairs Slope”(TSME-2024-0174), The 14th TSME International Conference on Mechanical Engineering (TSME-ICoME 2024) Pattaya, Thailand.
2. R Hasan, S Shams, M S Rahman, and M H Rahman, "Numerical Investigation of Local Scour Around Different Shaped Bridge Piers" published in the proceedings of 12th TSME International Conference on Mechanical Engineering (TSME-ICoME- 2022), Phuket, Thailand.
3. Shadman Mahmud, Adib Adnan, Shahnoor Shamim Khan, Md. Hamidur Rahman “Effect of Various Angles of Flat Brake Plate on Aerodynamic Drag for Hyperloop Pod” published in the proceedings of 10th TSME International Conference on Mechanical Engineering (TSME-ICoME- 2019), Pattaya, Thailand.
4. Sayedus Salehin, Mohaimin Rahman, ASM Redwan Haider, Md. Hamidur Rahman, “Simulation and Analysis of Thermodynamic Cycles Using Coco Simulator: A User-Friendly Free-Software Package” published in the proceedings of International Conference on Recent Advances in Sustainable Energy Research 2019 (RAISER 2019), Penang, Malaysia.
5. Sayedus Salehin, Mohaimin Rahman, ASM Redwan Haider, Md. Hamidur Rahman, “Open Source Thermophysical Property Library, Coolprop, Coupled With Python For Analyzing Thermodynamic Cycles in Classroom and Research” published in the proceedings of International Conference on Recent Advances in Sustainable Energy Research 2019 (RAISER 2019), Penang, Malaysia.
6. Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Numerical Study of CO and CO2 Emissions from Rural Kitchen in Developing Countries” published in the proceedings of ASME 2015 International Mechanical Engineering Congress & Exposition, November 13-19, 2015, Houston, Texas, USA.
6. Rahman, M H, and Islam, A K M Sadrul, “Effects Of The Position of Kitchen Hood Suction On Thermal Comfort And Carbon Dioxide Gas Emission From An Urban Residential Kitchen In Developing Countries” published in the International Meeting on Advances in Thermofluids (IMAT-2014), Kualalampur, Malaysia.
7. Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Effects of Kitchen Hood System on Thermal Comfort and Carbon Dioxide Gas Emission from an Urban Residential Kitchen in Developing Countries” published in the proceedings of International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada.
8. Rahman, M H, Islam, A K M Sadrul, and Amin, Ruhul M, “Numerical Study of Carbon Dioxide Gas Emission From an Urban Residential Kitchen In Developing Countries” published in the proceedings of ASME 2012 International Mechanical Engineering Congress & Exposition, November 9-15, 2012, Houston, Texas, USA.
9. M. H. Rahman and A K M Sadrul Islam, "CFD Modeling of Natural and Forced Ventilation System in a Conventional Kitchen in Bangladesh" published in the 13th Asian Congress of Fluid Mechanics, 17-21 December, 2010, Dhaka, Bangladesh.
10. S. M. A Hasnine, M. H. Rahman, A. K. M. Sadrul Islam, “Numerical Modeling of Plume Dispersion around the Residential Buildings" published in the 13th Asian Congress of Fluid Mechanics, 17-21 December, 2010, Dhaka, Bangladesh.
11. S. M. A Hasnine, M. H. Rahman, A. K. M. Sadrul Islam, “CFD Simulation of Wind Field in the IUT Campus" published in the 13th Asian Congress of Fluid Mechanics, 17-21 December, 2010, Dhaka, Bangladesh.
12. A.K.M. Sadrul Islam, M. Ruhul Amin, Arafat A. Bhuiyan, and M. H. Rahman, "A Numerical Investigation of Fluid Flow and Heat Transfer in a Three-Dimensional Plain Fin-and-Tube Heat Exchanger" proceedings of 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 19-21 July 2010, Antalya, Turkey
13. Rahman, M., H., Hassan, I., and Kim. S. I, “Unsteady Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing” published in the proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air GT2010, June 14-18, 2010, Glasgow, UK.
14. Rahman, M., H., Kim. S. I, and Hassan, I., “Effect of Inlet Temperature on Blade Tip Leakage Flow and Shroud Heat Transfer” published in the proceedings of ASME Turbo Expo 2009, June 8-12, Orlando, Florida, USA.
15. Rahman, M., H., Hassan, I., and Kim. S. I, “Numerical Investigation of Shroud Heat Transfer in an Axial Flow Turbine: Steady State Analysis” published in the proceedings of ASME 2008 Summer Heat Transfer Conference, August 10-14, 2008 in Jacksonville, Florida, USA.
16. Rahman, M., H., A.R. Akhanda and A.K.M. Sadrul Islam, “Study, Design and Fabrication of a Solar Powered Adsorption Refrigeration System”, proceedings of World Renewable Energy Conference held in Florence, Italy, August 2006.