Embedded Files
Ideation
Ideation
Tell us about your assignment's idea for this week. Why do you care about this idea? What were you inspired by?
Tell us about your assignment's idea for this week. Why do you care about this idea? What were you inspired by?
Mobile stand
I used it because it's a simple and efficient idea to hold the mobile.
It consists of 2 perpendicular parts joined together with 2 screws and 2 nuts (2 T slot).
This video inspired me >> https://www.youtube.com/watch?v=TGl6IyOn6RA&t=36s
Tool Chain
Tool Chain
Which software/machines/materials did you use this week? Why?
Which software/machines/materials did you use this week? Why?
Software: Fusion 360
Material: Wood (thickness 3mm)
Machine: Laser cut
To apply 2D and 2.5D design
Design Process
Design Process
Explain the design process of your assignment. How did you use the tool/software to design and/or simulate your assignment?
Explain the design process of your assignment. How did you use the tool/software to design and/or simulate your assignment?
1- Design the prototype
2- Make the prototype on cardboard
3- Modify the prototype
4- Edit the design ( I recognized it's better for the 2 parts to be perpendicular to be attached with screws and nuts
5- Edit the dimensions to be stable. (Prototype)
6- Sketch the design and specify dimensions and angels
7- Design the 2D model on fusion 360
7.a- Draw the outlines
7.b- Add T slot in one part
7.c- Add holes in the other part
7.d- Extrude
7.d- Select the parts to cut on Laser Works
8- Modify to add fixing points
9- Apply fillet to the edges
10- Extrude components
11- Apply joints
12- Export dxf files
13- Import .dxf files to Laser Works
14- Select parts to cut
15- Save as .rld file
Fabrication/Implementation Process
Fabrication/Implementation Process
Explain the fabrication/implementation process of your assignment. How did you use the machine/tool to manufacture or implement the design of your assignment?
Explain the fabrication/implementation process of your assignment. How did you use the machine/tool to manufacture or implement the design of your assignment?
1- Upload rld file to the machine
2-Put the material in the machine (polywood 3mm) sheet
3- Power on th machine
4- press the File button, then Memory Files
5- Select the project file by hitting the Enter button
6- Track frame
7-Run
8- It took 41 sec only
Community of Learning
Community of Learning
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
Did you ask for feedback? What are the ideas that others have contributed or suggested? What was someone else’s idea that you built upon? How did you help your peers? How did your peers help you?
I asked my instructor about the interlock mechanism to assemble the design parts, it was not the best idea, so I decided to use the fasteners as mentioned in the assignment description.
Overcoming Challenges
Overcoming Challenges
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this project?
When you got stuck, what/who did you turn to? At what point did you have to pause to research or learn more before moving on? What are some mistakes, pitfalls, or challenges that others can avoid if they were doing this project?
I got stuck because I think at first I can assemble the design parts using the interlock mechanism.
We should assemble using fasteners.
I modified the design parts to be perpendicular.
To be stable, the height and length were decreased.
I got stuck to know some 2 lines dimensions
1- I asked my instructor
2- I searched for the same sketch in the other parts and finally I found the fully detailed one.
Can't make the sketch fully defined, when I try to apply constraints it tells me the constraint already applied, or another constraint is applied.
I copied the T slot but there was an error while I mirrored it.
I sketched it from scratch again.
The holes disappear from the right part when I extrude, I think this happens because I couldn't make the sketch fully defined.
The holes appear when I didn't select them.
Final Project
Final Project
How can you use the skills and knowledge that you've acquired this week in your final project?
How can you use the skills and knowledge that you've acquired this week in your final project?
2D, 2.5D design & fusion to design and make the robot arm body
WOW!
WOW!
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
"Product design online" channel is really cool and helped me a lot to understand many topics.
I made a 3D stamp that stamps a robot.
I learnt new tools (offset, offset construction, project, loft, fillet)
Weekly Digest [OPTIONAL]
Weekly Digest [OPTIONAL]
Tell us about any other cool things that you've made this week: Pre-activity, examples, exercises, or any mini-projects.
Tell us about any other cool things that you've made this week: Pre-activity, examples, exercises, or any mini-projects.
I googled tutorials to practice more on Fusion 360, found that "product design online" YouTube channel is really cool and helpful.
https://www.youtube.com/watch?v=qvrHuaHhqHI&t=16s
https://www.youtube.com/watch?v=lMaY5IEpo1g&t=113s
https://www.youtube.com/watch?v=quGQB91V0z0&t=650s
https://www.youtube.com/watch?v=fblMn78rANI
https://www.youtube.com/watch?v=qVc2S7LmaCA
https://www.youtube.com/watch?v=qVc2S7LmaCA
https://www.youtube.com/watch?v=MdDIvjUHlTQ
https://www.youtube.com/watch?v=HcHRi_XI7Go
https://www.youtube.com/watch?v=UTlzmg7b_Cg&t=467s
https://www.youtube.com/watch?v=Y869FR0nvo4&t=44s
Catapult design hands on
Assignment Design Files
Assignment Design Files
Page updated
Google Sites
Report abuse