J1 Manoj, I, and Jain A., Fracture Behavior and Strength Enhancement of 3D-printed Stepped-Lap Bonded Joints Using Geometrically Graded Interfaces: Experimental Validation and Damage Modelling, accepted for publication in Journal of Adhesion Science and Technology on the 11th of October 2025
J2 Shah A, Vora Y, Palit A, Williams MA. Wilson PA, Jain A., Microstructural Alteration and Its Impact on the Effective Stiffness of Short Carbon Fiber-Reinforced PLA in Fused Deposition Modelling, Composites Part A: Applied Science and Manufacturing 2025, 199: 109229; https://doi.org/10.1016/j.compositesa.2025.109229
J3 Nisamudhin K. M, AcharyaA., Jain A., DasGupta A., Vibration and Damping Characteristics of 3D-Printed Lattice Beams, Mechanics of Materials 2025, 210:105448; https://doi.org/10.1016/j.mechmat.2025.105448
J4 Acharya A., Mahato A., Roy S., DasGupta A., Jain A., Mechanics of Fused Deposition Modelling Printed Novel Nested Auxetic Lattices, Smart Materials and Structures, 2025 34(3):035032 10.1088/1361-665X/adb6e4
J5 Kumar A., Jain A., DasGupta A., Irregular and regular honeycomb lattice structures: Effective properties and design perspectives. Journal of Applied Mechanics; 2025 92(6) 061008:1-12 https://doi.org/10.1115/1.4068033
J6 Bhadra M., Vinod G, Jain A., Design optimization of sandwich composite cylinder using modified differential evolution algorithm. Mechanics Based Design of Structures and Machines, An International Journal; 2025 53(6):4465–4483 https://doi.org/10.1080/15397734.2025.2450521
J7 Dhar D., Jain A., Beyond effective stiffness: A modified differential Mori-Tanaka-Voigt homogenization for predicting stresses in individual inclusions. International Journal of Solids and Structures, 2025 309:113152 https://doi.org/10.1016/j.ijsolstr.2024.113152
J8 Manoj, I, and Jain A. Strength improvement and failure analysis of dissimilar FDM printed single-lap joints with tailored interface geometry, 2025, 136:103876, International Journal of Adhesion and Adhesives. https://doi.org/10.1016/j.ijadhadh.2024.103876
J9 Bhadra M, Vinod G, Jain A., Optimization of composite cylinder subjected to hydrostatic pressure using customized evolutionary algorithm Mechanics of Advanced Materials and Structures, 2024 32(15), 3578–3590 https://doi.org/10.1080/15376494.2024.2394984
J10 Dhar D, Jain A., Feasibility problems with the differential Mori-Tanaka method and modifications for refining inclusion stress predictions. Mechanics of Materials, 2024, 198:105125 https://doi.org/10.1016/j.mechmat.2024.105125
J11 Shah A, Vora Y, Palit A, Williams MA. Wilson PA, Jain A., Evolution of microstructure and thermo-mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study. Polymer Composites, 2024 45;17: 16112-16132 https://doi.org/10.1002/pc.28894
J12 Lakhera M, Agrawal R, Dhar D, Jain A. On the Application of the Mean-Field Homogenization for Non-isotropic Matrix. Journal of The Institution of Engineers (India): Series C. 2024 105:683-692., https://doi.org/10.1007/s40032-024-01062-y
J13 Manoj I, Shah AK, Jain A. Strength and failure assessments of 3D printed PLA single lap joints: Experimental and numerical analysis. Engineering Failure Analysis. 2024 161:108257. https://doi.org/10.1016/j.engfailanal.2024.108257
J14 Acharya A, DasGupta A, Jain A. Design and study of novel Nested auxetic lattices with tunable and enhanced in-plane elastic properties. International Journal of Solids and Structures. 2024 293:112749. https://doi.org/10.1016/j.ijsolstr.2024.112749
J15 Bhadra MK, Vinod G, Jain A. DNN assisted optimization of composite cylinder subjected to axial compression using customized differential evolution algorithm. International Journal of Mechanics and Materials in Design. 2024 12:1-24. https://doi.org/10.1007/s10999-023-09705-1
J16 Kumar A, DasGupta A, Jain A. Microstructure generation algorithm and micromechanics of curved fiber composites with random waviness. International Journal of Solids and Structures. 2024 289:112625. https://doi.org/10.1016/j.ijsolstr.2023.112625
J17 Shah AK, Jain A. Hybrid multi-scale modeling of fused deposition modelling printed thermoplastics: An introduction to material degradation parameter. Journal of Thermoplastic Composite Materials. 2024 37(7):2425-46. doi:10.1177/08927057231217234
J18 Acharya A, Muthkani V, DasGupta A, Jain A. An infill-based approach towards stiffer auxetic lattices: Design and study of enhanced in-plane elastic properties. Mechanics of Materials. 2024 188:104849. https://doi.org/10.1016/j.mechmat.2023.104849
J19 Dhar D, Jain A. Improved micromechanical prediction of short fibre reinforced composites using differential Mori-Tanaka homogenization. Mechanics of Materials. 2023 185:104768. https://doi.org/10.1016/j.mechmat.2023.104768
J20 Manoj I, Kumar S, Jain A. A numerical study on stress mitigation in through-thickness tailored bi-adhesive single-lap joints. Journal of Adhesion Science and Technology. 2023 37(24):3652-86. doi: 10.1080/01694243.2023.2217674
J21 Shah AK, Jain A. Microstructure and mechanical properties of filament and fused deposition modelling printed polylactic-acid and carbon-fiber reinforced polylactic-acid. Journal of Reinforced Plastics and Composites. 2024 43(9-10):516-31. doi: 10.1177/07316844231167551
J22 Dhar D, Lomov SV, Jain A. Predictive abilities of pseudodiscretization and pseudograin discretization schemes of the Mori–Tanaka homogenization, benchmarked against real and virtual RVEs. Mechanics of Advanced Materials and Structures. 2024 31(13):2743-58. doi: 10.1080/15376494.2022.2163438
J23 Krishna CG, Vora YA, Manoj I, Patle TM, Jain A. Influence of the Geometric Parameters on the Fiber Stresses in Unidirectional Composites Subject to Transverse Loading. Journal of Engineering Materials and Technology. 2023 145(2):021005. https://doi.org/10.1115/1.4056179
J24 Swaroop D, Dhar D, Suriyan A, Jain A. Of spheres and infinite cylinders: A critical relook at multi-step mean-field homogenization formulations. Mechanics of Materials. 2022 174:104447. https://doi.org/10.1016/j.mechmat.2022.104447
J25 Simon J, Jain A. The effect of packing type on the equivalent modulus and stress concentrations of unidirectional composites. Mechanics of Composite Materials. 2023 58(6):883-96. https://doi.org/10.1007/s11029-023-10076-z
J26 Verma P, Ubaid J, Schiffer A, Jain A., Martínez-Pañeda E, Kumar S. Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing. The International Journal of Advanced Manufacturing Technology. 2021 113:771-84. https://doi.org/10.1007/s00170-020-06580-4
J27 Jain A. On the multi-axial fatigue modelling of short fibre reinforced composites: Extensions to the Master SN curve approach. International Journal of Fatigue. 2021 145:106106. https://doi.org/10.1016/j.ijfatigue.2020.106106
J28 Jain A., Boisse P, Carvelli V, Gorbatikh L, Ivanov D, Long A, Zako M, Verpoest I. Contributions of Stepan V Lomov to the research and development of composite materials. Journal of Composite Materials. 2020 54(29):4723-47. https://doi.org/10.1177/0021998320937066
J29 Jain A.., Abdin Y, Van Paepegem W, Lomov SV. Direct Mori-Tanaka calculations of strains in ellipsoidal inclusions with multiple orientations: comments on the papers: Naili, G. et al. Comp Sci Tech, 187: 107942, 2020 (https://doi. org/10.1016/j. compscitech. 2019.107942) and Jain, A. et al., Comp Sci Tech, 87: 86–93, 2013 (https://doi. org/10.1016/j. compscitech. 2013.08. 009). Composites Science and Technology. 2020;190.
J30 Jain A., Micro and mesomechanics of fibre reinforced composites using mean field homogenization formulations: A review. Materials Today Communications. 2019 Dec 1;21:100552. doi: https://doi.org/10.1016/j.mtcomm.2019.100552
J31 Featured article: Jin BC, Li X, Jain A., Wu MS, Mier R, Herraez M, Gonzalez C, LLorca J, Nutt SR. Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods. SAMPE Journal. 2017 Sep 1;53(5).
J32 Zhang Y, Jain A., Grunenfelder LK, Miyauchi M, Nutt S. Process development for phenylethynyl-terminated PMDA-type asymmetric polyimide composites. High Performance Polymers. 2018 ;30(6):731-41. doi: 10.1177/0954008317720802
J33 Jain A., Jin BC, Nutt S. Mean field homogenization methods for strand composites. Composites Part B: Engineering. 2017 124:31-9. doi: 10.1016/j.compositesb.2017.05.036
J34 Jin BC, Li X, Jain A., González C, LLorca J, Nutt S. Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg. Composite Structures. 2017 174:389-98., doi: https://doi.org/10.1016/j.compstruct.2017.05.002
J35 Jain A., Van Paepegem W, Verpoest I, Lomov SV. A statistical treatment of the loss of stiffness during cyclic loading for short fiber reinforced injection molded composites. Composites Part B: Engineering. 2016 103:40-50. 10.1016/j.compositesb.2016.08.002
J36 Jain A., Van Paepegem W, Verpoest I, Lomov SV. A feasibility study of the Master SN curve approach for short fiber reinforced composites. International Journal of Fatigue. 2016 91:264-74. doi:10.1016/j.ijfatigue.2016.06.015
J37 Abdin Y, Jain A., Verpoest I, Lomov SV. Mean-field based micro-mechanical modelling of short wavy fiber reinforced composites. Composites Part A: Applied Science and Manufacturing. 2016 91:472-83. http://dx.doi.org/10.1016/j.compositesa.2016.03.022.
J38 Jain A., Veas JM, Straesser S, Van Paepegem W, Verpoest I, Lomov SV. The Master SN curve approach–A hybrid multi-scale fatigue simulation of short fiber reinforced composites. Composites Part A: Applied Science and Manufacturing. 2016 91:510-8. doi:10.1016/j.compositesa.2015.11.038
J39 Mohite PM, Jain A., Upadhyay CS. Micromechanics Based Fibre Breaking Damage Mesomodel for Unidirectional Fibrous Laminated Composites. Journal of Aerospace Sciences and Technologies. 2015:500-13.
J40 Jain A., Abdin Y, Van Paepegem W, Verpoest I, Lomov SV. Non-symmetric stiffness tensor prediction by the Mori-Tanaka scheme-Comments on the article" Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models"[Composite Structures 131 (2015) 692-706]. Composite Structures. 2015 134:1118-9., http://dx.doi.org/10.1016/j.compstruct.2015.08.140
J41 Jain A., Abdin Y, Van Paepegem W, Verpoest I, Lomov SV. Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models. Composite Structures. 2015 131:692-706. doi:10.1016/j.compstruct.2015.06.007
J42 Abdin Y, Lomov SV, Jain A., Van Lenthe GH, Verpoest I. Geometrical characterization and micro-structural modeling of short steel fiber composites. Composites Part A: Applied Science and Manufacturing, 2014 67:171-80. doi:10.1016/j.compositesa.2014.08.025
J43 Jain A., Lomov SV, Abdin Y, Verpoest I, Van Paepegem W. Pseudo-grain discretization and full Mori Tanaka formulation for random heterogeneous media: Predictive abilities for stresses in individual inclusions and the matrix. Composites science and Technology, 2013 87:86-93. https://doi.org/10.1016/j.compscitech.2013.08.009
J44 Jain A., Verpoest I, Hack M, Lomov S, Adam L, Van Paepegem W. Fatigue Life Simulation on fiber reinforced composites-overview and methods of analysis for the automotive industry. SAE International Journal of Materials and Manufacturing. 2012 5(1):205-14.
For preprints of any paper, please contact atuljain@mech.iitkgp.ac.in