Asbestos Exposure in Louisiana - Lung Cancer and Mesothelioma

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This listing refers to the Suntide Refinery / Sun Oil / Sunoco location in Delhi, Louisiana.

Superior Iron Works & Supply in Shreveport, Louisiana operated as an iron works and industrial supply business, providing metal fabrication, welding, and machine shop services alongside distribution of industrial parts and materials to area industries; at the Shreveport, LA location, typical operations would have included cutting, shaping, and assembling steel components and supporting regional construction and maintenance activities with shop crews, welders, machinists, pipefitters, and warehouse staff. As with many mid - 20th - century iron works, machine shops, and supply houses, possible asbestos exposure could have arisen from historical use or handling of asbestos - containing products such as gaskets, valve packing, pipe and equipment insulation, refractory cements, and heat - resistant textiles, with elevated risk during cutting, grinding, removal, or replacement of these materials by production and maintenance personnel.

Superior Oil Company operated in Houma, Louisiana as a Gulf Coast field base supporting nearby onshore marsh and offshore Gulf of Mexico exploration and production, with typical functions including drilling logistics, warehousing, equipment maintenance, production support, and servicing of platforms and gathering systems; following Superior's acquisition by Mobil in 1984, activities at the Houma location were integrated into successor operations. As was common across the industry during the mid-20th century, the Superior Oil Co Houma, LA site likely employed asbestos-containing materials for heat and fire resistance, including pipe and vessel insulation, gaskets and packing for pumps and valves, and components in boilers, heaters, and process equipment, as well as fireproofing used on offshore support assets. Potential asbestos exposure could have occurred during installation, maintenance, or removal of these materials - particularly for mechanics, pipefitters, insulators, and electricians - with risks reduced after regulations tightened in the 1970s-1980s but with possible legacy materials persisting in older systems. This overview summarizes the operations context and plausible exposure pathways associated with the Superior Oil Co - Houma, LA location.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This note concerns Superior Oil Co. - Rayne, LA in Rayne, Louisiana.

For Supply Depot - New Orleans, LA, there is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The Supreme Sugar Factory in Supreme, Louisiana was a cane sugar mill that processed locally grown sugarcane into raw sugar and molasses during the annual grinding season, using operations typical of Louisiana mills such as cane receiving and preparation, multi-roll milling or diffuser extraction, juice clarification, multiple-effect evaporation, vacuum pan crystallization, centrifugal separation, and raw sugar drying and storage, with steam and power supplied by bagasse- and/or oil-fired boilers driving turbines and process equipment. Situated in the Assumption Parish/Bayou Lafourche cane belt, the facility supported area growers and provided industrial jobs for operators, mechanics, millwrights, electricians, pipefitters, boiler tenders, and seasonal labor. As with many sugar factories of the mid-20th century, the plant's high-temperature systems and equipment at the Supreme, LA site commonly involved asbestos-containing materials in boiler and steam line insulation, turbine and evaporator lagging, gaskets, valve packing, refractory, and cement products, creating potential exposure for production and maintenance workers and contractors, especially during shutdowns, repairs, or insulation removal in enclosed spaces like boiler rooms and pan floors. Tasks such as cutting or replacing insulation, machining gaskets, or disturbing aged lagging could release airborne fibers, and cleanup during turnarounds could further spread dust. While specific incidents are not cited here, the historical use of asbestos in sugar mill steam systems makes asbestos exposure a recognized possibility at the Supreme Sugar Factory in Supreme, Louisiana.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Supreme Sugar Refinery in Supreme, Louisiana operated as a cane sugar processing facility that received raw sugar from area mills, refined it into consumer and industrial products, and handled packaging and distribution using large boilers, steam piping, evaporators, centrifugals, dryers, pumps, and conveyors to support the regional sugarcane economy; as with many sugar mills and refineries in the 20th century, these high-temperature and mechanical systems created potential asbestos exposure from insulation on pipes and boilers, gaskets and packing, refractory and drying equipment, and other building materials, with the greatest risk to maintenance workers, pipefitters, boiler operators, and contractors who conducted repairs, insulation removal, or cleanup before stronger asbestos controls were in place.

Supreme Sugar Refining - Tallien, LA is referenced as a potential asbestos exposure site, but there is no publicly available detail on the facility's operations, ownership history, or timeframe in Tallien, Louisiana. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Supreme Sugars in Supreme, Louisiana operated as a sugarcane processing facility serving the region's cane industry, with operations that typically included receiving and milling harvested cane, clarifying juice, evaporating and crystallizing sugar, centrifuging crystals, and packaging or shipping the product, supported by steam boilers, turbines, extensive piping, and on-site maintenance shops; as with many Louisiana sugar mills of the era, possible asbestos exposure could have occurred due to historical use of asbestos-containing insulation on boilers and steam lines, as well as asbestos gaskets and packing in pumps, valves, and other high-temperature equipment, with the highest potential risk for maintenance personnel, pipefitters, insulators, and contractors working during repairs, outages, or renovations.

Sw Gas & Electric Co (Southwestern Gas & Electric Company) operated as a regional utility serving parts of Louisiana, Texas, and Arkansas, with Shreveport, Louisiana functioning as a key operating and administrative hub that supported power generation, transmission, distribution, and customer service; the enterprise later continued under its successor, Southwestern Electric Power Company (SWEPCO), now part of American Electric Power. Consistent with industry practices of the mid-20th century, facilities associated with Southwestern Gas & Electric Co - including power plants, substations, and maintenance shops - used asbestos-containing materials such as boiler and turbine insulation, pipe and valve lagging, gaskets and packing, refractory cement, transite panels, and some electrical components, creating potential asbestos exposure for employees and contractors (e.g., pipefitters, electricians, insulators, machinists, and maintenance crews) during installation, repair, and renovations, particularly through the 1970s and into the early 1980s before modern abatement programs. Work performed in and around Shreveport, LA facilities and regional plants therefore carried the kinds of asbestos risks typical for utility operations of that era.

Sweetlake Land & Oil Company in Holmwood, Louisiana operates as a land and mineral management entity in the Sweet Lake-Holmwood area, historically involved in leasing and overseeing properties for oil and gas exploration and production and coordinating related field activities such as drilling support, pipeline work, and production maintenance. Because Gulf Coast oilfield equipment and infrastructure installed or serviced prior to the 1980s commonly used asbestos-containing insulation, gaskets, packing, cements, and brake components, workers and contractors performing maintenance, repairs, or demolition on boilers, heaters, separators, piping, or vehicles at or associated with Sweetlake Land & Oil Company - Holmwood, LA may have faced potential asbestos exposure.

There is no additional information available on the Sweetlake Land & Oil Company - Iowa, LA site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This entry refers to the Sweetlake Land & Oil Company in Lacassine, Louisiana.

Sweetlake Land & Oil Company is a site in Lake Charles, Louisiana. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Swift And Company in Harvey, Louisiana: There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Swift And Company - New Orleans, LA was part of Swift & Company's national meatpacking and food distribution network serving the Gulf Coast, leveraging proximity to the Port of New Orleans for receiving, cold storage, and regional distribution of meat products. Located in New Orleans, Louisiana, operations at this facility typically centered on handling, chilling or freezing, and shipping prepared meats and related goods to commercial customers. As with many industrial food-processing plants of the mid-20th century, possible asbestos exposure at this site could have arisen from insulation on boilers, steam and hot-water lines, and ammonia refrigeration systems, as well as from gaskets, packing, and other heat-resistant building materials used in equipment rooms and maintenance areas. Workers most likely to have encountered asbestos-containing materials included maintenance and engineering personnel, pipefitters, insulators, and production employees performing repairs or cleanup, particularly before asbestos use declined under updated safety standards.

There is no additional information available on T P Switch in New Orleans, LA, but it is on the list of sites where asbestos exposure may have occurred.

T. Smith Incorporated in New Orleans, Louisiana was a maritime services and stevedoring firm that supported vessel operations on the Mississippi River and at Port of New Orleans terminals, providing cargo loading and unloading, midstream transfers, warehousing, and related dockside logistics. Given the nature of port work in New Orleans, LA during the mid-1900s through the late 1970s and into the 1980s, workers at T. Smith Incorporated may have faced asbestos exposure from several sources, including handling bagged asbestos or asbestos-containing products as cargo, contact with shipboard and dockside insulation, gaskets, and packing, and maintenance of cranes, winches, forklifts, and other equipment that historically used asbestos-containing friction materials. Potentially affected groups included longshoremen, cargo handlers, equipment maintenance personnel, and marine or terminal crews. While specific operational details vary by period, the company's role in regional stevedoring and terminal operations places it among locations where occupational asbestos exposure could have occurred.

T.E. Schumpert Memorial Sanitarium in Shreveport, Louisiana was a long-serving Catholic hospital that grew from an early sanitarium into a regional acute-care institution, later operating as Schumpert Medical Center and ultimately becoming part of the CHRISTUS Schumpert/CHRISTUS Shreveport-Bossier Health System, offering emergency care, surgery, maternity, and a range of specialty services. Over many decades the Shreveport, LA campus saw multiple additions and renovations typical of hospitals of its era. As with many medical facilities built or modernized before the 1980s, construction and mechanical systems at T.E. Schumpert Memorial Sanitarium may have incorporated asbestos-containing materials such as pipe and boiler insulation, fireproofing, flooring and ceiling tiles, and roofing products. Potential asbestos exposure could have affected maintenance and engineering personnel, plumbers, electricians, HVAC workers, and renovation or demolition contractors who disturbed aging materials, with incidental exposure possible for clinical staff and patients during construction activity; proper identification and abatement procedures are necessary when legacy materials are encountered.

T.J. Jackson in New Orleans, Louisiana: There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on the Takoil site in New Orleans, Louisiana, but it is on the list of sites where asbestos exposure may have occurred.

Located in Tallulah, Louisiana, the Tallulah Cotton Oil Company operated as a cottonseed processing and oil-milling facility that received seed from regional gins and produced cottonseed oil along with byproducts such as meal, hulls, and linters through seed cleaning, dehulling, cooking, pressing, and refining steps typical of the industry. The plant's operations relied on heat and power from boilers and steam systems, as well as presses, cookers, dryers, and conveyors, supported by maintenance activities to keep equipment running during milling seasons. Because facilities of this type and era commonly used asbestos-containing materials for thermal insulation and sealing, potential asbestos exposure at the Tallulah Cotton Oil Company in Tallulah, LA could have occurred around insulated boilers and steam piping, on heated process vessels and dryers, and from gaskets and packing during maintenance and repairs, potentially affecting production workers, mechanics, and contractors.

Tally Ho Factory refers to the sugar processing facility associated with the historic Tally Ho Plantation in Bayou Goula, LA, part of Iberville Parish's long-established sugarcane industry. Operations at such a facility typically involved cane crushing, juice clarification and boiling, crystallization, and handling of bagasse, supported by steam-powered boilers and extensive piping common to Louisiana sugar factories. Publicly available, site-specific details are limited, but the industrial profile aligns with regional sugar-production practices. Asbestos-containing materials were widely used across similar facilities during much of the 20th century - especially in boiler and pipe insulation, gaskets, pump and valve packing, and fireproofing - creating the potential for occupational exposure during routine operation, maintenance, repairs, and later demolition or renovation. Consequently, workers at the Tally Ho Factory in Bayou Goula, Louisiana, including boiler tenders, pipefitters, mechanics, and laborers, may have faced asbestos exposure risks consistent with industry norms of the period.

Talon - New Orleans, LA is a referenced site in New Orleans, Louisiana, but no specific operations or general background details could be confirmed. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The listing "Tattnall (Uss) - New Orleans, LA" most directly relates to USS Tattnall (DDG-19), a Charles F. Adams-class guided-missile destroyer constructed and outfitted at Avondale Shipyards in the New Orleans, Louisiana area before joining the U.S. Atlantic Fleet; commissioned in the early 1960s, she spent the Cold War conducting anti-air warfare, fleet escort, and training missions with deployments in the Atlantic, Caribbean, and Mediterranean, and was decommissioned in the early 1990s. Because Navy surface combatants of this era were built with extensive asbestos-containing materials, shipyard workers in New Orleans, LA and crew members aboard the vessel could have been exposed to asbestos in thermal insulation and lagging on steam piping, boiler and turbine insulation, pump and valve packing, gaskets and sealants, electrical insulation, and some deck materials; exposure risks were heightened during construction, overhauls, and repairs, particularly in engineering spaces such as engine and boiler rooms.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This note pertains to Taxiarch in New Orleans, Louisiana.

Taylor Contracting And Supply in Shreveport, Louisiana has been identified among potential asbestos exposure sites, but specific operational or historical details about this location are not publicly documented. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Taylor Seidenbach Inc. in New Orleans, Louisiana is a long-standing industrial and marine insulation supplier and contractor that for decades sold, stocked, and supported thermal, refractory, and acoustical insulation systems for shipyards, refineries, power and chemical plants, and commercial buildings throughout the region. Operating from its New Orleans, LA facilities, the company maintained warehouse and fabrication functions and provided field support and installation services, distributing products from major manufacturers commonly used before stricter regulations took hold in the late 1970s and 1980s. During earlier periods when many insulation materials contained asbestos, possible exposure could have occurred to Taylor Seidenbach employees, contractors, and tradespeople at client sites through handling, cutting, mixing, installing, removing, and cleaning up pipe covering, block insulation, insulating cements, gaskets, and packing, as well as from airborne dust in warehouses and on jobsites. The company has been named in asbestos litigation tied to historical sales and jobsite work in the New Orleans area, reflecting the industry-wide use of asbestos-containing insulation during that era.

Taylor Seidenbach Switch - Door Nbr 4 in New Orleans, Louisiana refers to a designated area within the New Orleans operations of Taylor-Seidenbach, Inc., a long-standing industrial and marine insulation supplier and contractor that warehoused, distributed, and installed thermal insulation, gaskets, refractory materials, and related products for shipyards, refineries, power plants, and commercial facilities. Specific operational details for the location labeled "Switch - Door Nbr 4" are not publicly documented, but the company's New Orleans facility historically handled receiving, storage, and dispatch of insulation materials for field work. Prior to regulatory changes in the late 1970s and early 1980s, many insulation products used and supplied by firms like Taylor-Seidenbach contained asbestos, so workers and nearby trades at this New Orleans site could have been exposed to airborne dust during handling, cutting, mixing, cleanup, or removal, and the location appears on lists of sites where asbestos exposure may have occurred.

Taylor-Seidenbach, Inc. in New Orleans, Louisiana is a long-standing industrial and marine supplier and contractor known for distributing and installing mechanical insulation, gaskets, packing, and related fireproofing and acoustical materials for shipyards, refineries, chemical plants, and commercial/commercial-building projects across the Gulf Coast; the New Orleans, LA location has typically combined sales offices with warehouse and light fabrication functions (such as cutting insulation and preparing sealing products) to support field crews and regional customers. Historically, prior to the widespread phase-out of asbestos in the late 1970s and 1980s, many insulation and sealing products used in these sectors contained asbestos, so workers handling pipe covering, block and blanket insulation, insulating cements, and gasket/packing materials - during cutting, mixing, installation, removal, or cleanup - could have experienced asbestos exposure associated with Taylor-Seidenbach, Inc. operations in New Orleans. The company has been named in asbestos litigation in Louisiana related to alleged exposures at shipyards and industrial sites; modern operations emphasize non-asbestos materials and current safety standards.

Taylor-Seidenbach, Inc. - Shreveport, LA operated as a regional branch of a long-standing Louisiana industrial insulation and materials supplier, functioning primarily as a warehouse and distribution center - with limited fabrication and, in some periods, installation support - for mechanical and thermal insulation, refractories, gaskets, and related industrial products serving customers in north Louisiana, including Shreveport, Louisiana, and the broader Ark-La-Tex region. The location's operations focused on supplying materials for petrochemical plants, power generation, pulp and paper, shipyard support, and commercial construction and maintenance. Historically, the company distributed and worked with asbestos-containing insulation products - including pipe and block insulation, insulating cements, cloths, tapes, and some gasket and packing materials - especially prior to the 1980s, when such materials were common in the industry, creating potential asbestos exposure risks for warehouse workers, fabrication and installation personnel, contractors, and maintenance crews during cutting, mixing, fitting, removal, or disturbance of aged insulation. Taylor-Seidenbach has been named in asbestos-related litigation in Louisiana, reflecting the historical use of asbestos-containing products; later operations shifted toward non-asbestos substitutes and compliance with modern safety and abatement practices.

The Tennaco Oil Refinery in Chalmette, Louisiana, commonly associated in historical records with Tenneco Oil and known today as the Chalmette refinery, is a large Gulf Coast petroleum complex on the Mississippi River that processes crude oil into gasoline, diesel, jet fuel, petroleum coke, sulfur, and other products using major process units such as crude and vacuum distillation, hydrotreaters, catalytic reforming, fluid catalytic cracking, and coking; over the decades the facility has operated under multiple owners and names and remains a significant industrial employer in St. Bernard Parish. As with many refineries built or expanded in the mid-20th century, the Chalmette, LA site likely incorporated asbestos-containing insulation, gaskets, valve and pump packing, fireproofing, and certain building materials, creating potential exposure risks for insulators, pipefitters, maintenance and turnaround crews, and contractors during repair, removal, or disturbance of aged materials prior to modern abatement and control measures.

There is no additional information available on Tenneco / Bay Petroleum - Chalmette, LA in Chalmette, Louisiana, but it is on the list of sites where asbestos exposure may have occurred.

Tenneco Chemicals Company in Oakdale, Louisiana: There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This note pertains to the Tenneco Oil Building in Chalmette, Louisiana.

Tenneco Oil Co. operated a large refinery complex in Chalmette, Louisiana that processed crude oil into fuels and petrochemical feedstocks through units such as crude and vacuum distillation, catalytic cracking, reforming, hydrotreating, utilities, and sulfur recovery, supported by extensive maintenance and fabrication activities; the designation "Vessel Skirts & Legs" refers to the structural supports and skirts at the bases of towers, reactors, drums, and other pressure vessels where welding, anchoring, coating, insulation, and fireproofing work were routinely performed. At this Chalmette, LA facility, workers and contractors who installed, removed, or disturbed thermal insulation, refractory, lagging, and cementitious fireproofing on vessel skirts and legs - as well as gaskets and packing on adjacent piping, pumps, and valves - could have encountered asbestos-containing materials commonly used in refineries through the late 1970s, with the highest potential exposure during turnarounds and tasks like chipping, cutting, grinding, sandblasting, and cleanup in confined areas. Trades with elevated risk historically included insulators, pipefitters, boilermakers, welders, and general laborers; from the 1980s onward, reduced asbestos use and abatement protocols, containment, and respiratory protection became more prevalent. While no site-specific incident data is cited here, the industrial operations and historical material practices at the Tenneco Oil Co. - Vessel Skirts & Legs location in Chalmette, Louisiana indicate potential for asbestos exposure during periods when such products were in service.

The Tenneco Oil Company site in Chalmette, Louisiana operated as part of the company's downstream petroleum network, handling oil processing, product storage, and distribution activities within the industrial corridor along the Mississippi River; these operations supported regional fuel supply prior to Tenneco's divestment of oil assets late in the twentieth century. As with many petroleum facilities of that era, high - temperature equipment and extensive piping at the Chalmette, LA location commonly used asbestos - containing insulation, gaskets, and fireproofing, so personnel involved in operations, maintenance, turnarounds, or demolition could have encountered disturbed asbestos materials, presenting potential exposure risks to workers and contractors.

The Tenneco Oil Company Refinery in Chalmette, Louisiana, was a large, Mississippi River-adjacent downstream complex commonly known as the Chalmette Refinery that processed domestic and imported crude into transportation fuels such as gasoline, diesel, and jet fuel, along with other refined products and feedstocks, using core units including crude distillation, catalytic cracking, reforming, hydrotreating, and coking; after the period of Tenneco Oil Company operations, ownership transitioned to Exxon/ExxonMobil and later to other operators, with the site remaining a significant employer in St. Bernard Parish and experiencing major weather-related disruptions during events such as Hurricane Katrina in 2005. As with most U.S. refineries built and expanded before the 1980s, equipment and infrastructure at the Tenneco Oil Company Refinery - Chalmette, LA likely incorporated asbestos-containing insulation, gaskets, packing, and fireproofing on boilers, piping, heat exchangers, pumps, and associated process units, creating potential asbestos exposure risks for insulators, pipefitters, boilermakers, maintenance and turnaround crews, and contractors during installation, repair, or demolition activities until such materials were controlled or abated under later regulations.

The Tenneco Oil Refinery in Chalmette, Louisiana was a long-running Gulf Coast petroleum facility in St. Bernard Parish that processed crude oil into transportation fuels and petrochemical feedstocks, with typical refinery operations such as crude and vacuum distillation, catalytic cracking, hydrotreating/reforming, storage, and marine and pipeline shipping; the site operated for decades under Tenneco Oil during part of its history and later continued under subsequent owners as Chalmette Refining. As with many refineries of its era, potential asbestos exposure at the Chalmette, LA facility could have occurred because asbestos-containing insulation, gaskets, packing, and refractory materials were widely used on high-temperature equipment and piping, including boilers, turbines, heat exchangers, pumps, and valves; maintenance and turnaround activities that disturbed aging insulation and gaskets posed the greatest risk to operators, pipefitters, insulators, welders, electricians, and contractors, especially before stricter controls and abatement became common in the late 1970s and 1980s.

Tenneco Oil. Co. in Chalmette, Louisiana operated a petroleum refinery and associated storage and transportation facilities along the Mississippi River, supporting fuel supply for the New Orleans area and the broader Gulf Coast. The site's operations typically included receiving crude oil by ship and pipeline; distilling and upgrading feedstocks into gasoline, diesel, jet fuel, LPG, and other refined products; and running utility systems such as steam and power generation, water treatment, and extensive maintenance shops for pumps, valves, heaters, and process equipment. Over decades of operation, the facility in Chalmette, LA underwent routine upgrades and changes common in the refining industry while serving as a major industrial employer in St. Bernard Parish. As with many refineries built and expanded before tighter regulations took effect, asbestos-containing materials were widely used across the site, including thermal insulation on pipes and boilers, refractory in heaters, gaskets and packing in pumps and valves, and certain protective textiles, creating potential asbestos exposure for insulators, pipefitters, boilermakers, maintenance mechanics, electricians, and contractors - especially during shutdowns, repairs, and demolition. Disturbing old insulation or refractory could release airborne fibers, and dust on work clothing could pose secondary exposure risks. Individuals who worked at the Tenneco Oil. Co. - Chalmette, LA facility during earlier periods when these materials were in use may have experienced asbestos exposure consistent with conditions typical of refineries of that era.

The Tenneco Refinery in Chalmette, Louisiana was a long - running Gulf Coast petroleum processing complex along the Mississippi River that, under Tenneco Oil and later operators, refined crude oil into transportation fuels and related products using units typical of large refineries, such as crude and vacuum distillation, catalytic cracking, reforming, hydrotreating, alkylation, and sulfur recovery, with distribution via pipelines, barges, rail, and trucks; its workforce included plant operators, maintenance crafts, and contractors supporting routine operations, turnarounds, and expansions. Like many refineries built and expanded in the mid - 20th century, the Tenneco Refinery used asbestos - containing insulation, gaskets, packing, and fireproofing on piping, boilers, furnaces, turbines, and heat exchangers, creating potential asbestos exposure - especially during maintenance, repairs, and demolition - among insulators, pipefitters, boilermakers, millwrights, electricians, and other trades until abatement and tighter controls were implemented from the 1970s onward. Although risk declined as asbestos was removed or managed, legacy materials could have persisted in older units, so individuals who worked at the Tenneco Refinery in Chalmette, LA during earlier periods may have had exposure.

Tennessee Gas Pipeline - Compressor Station 40 in Natchitoches, Louisiana is a compressor facility on the Tennessee Gas Pipeline system, an interstate network that transports natural gas across the Gulf Coast and eastern United States and is operated by Tennessee Gas Pipeline Company, a subsidiary of Kinder Morgan. The station's primary function is to maintain pressure and flow in the pipeline by operating compressor units, along with typical supporting systems such as gas cooling, filtration/scrubbing, dehydration, pigging support, and automated monitoring and controls, with routine and major maintenance performed by operators, mechanics, electricians, and contractors. As with many compressor stations built or operated during the mid-20th century, materials historically used at such sites could include asbestos-containing insulation on high-temperature piping and exhaust systems, block or blanket insulation on heaters, and asbestos-based gaskets and valve packing; potential exposure would most likely have occurred during maintenance or removal that disturbed these materials (e.g., insulation replacement, gasket scraping, cutting, or grinding). Workers and contractors at the Natchitoches, LA station could therefore have faced potential asbestos exposure in earlier decades before widespread phase-out and modern abatement practices, while later upgrades generally relied on non-asbestos substitutes and stricter safety controls. Specific, publicly available inventories or confirmation of asbestos-containing materials for this exact site are not detailed, but the potential aligns with industry practices for similar facilities of its era.

The Tennessee Gas Plant in Grand Chenier, Louisiana functioned as part of the Tennessee Gas Pipeline system, receiving regional natural gas, performing separation and treating (such as dehydration and, where needed, sweetening), handling associated liquids, and providing compression to move gas into interstate transmission. Associated historically with Tennessee Gas Transmission (Tenneco) and later owners of the pipeline system, the facility supported operations in coastal Cameron Parish and nearby fields. Possible asbestos exposure at the Tennessee Gas Plant - Grand Chenier, LA could have arisen from the widespread mid - 20th - century use of asbestos-containing materials in gas plant environments, including thermal insulation on piping and equipment, gaskets and packing in valves and pumps, and refractory or insulation in heaters and boilers; maintenance, repair, and turnaround work before the 1980s would have posed higher risk to trades such as pipefitters, insulators, mechanics, and operators unless proper controls and abatement were in place.

Tennessee Gas Transmission Station 827 in Lecompte, Louisiana was part of the interstate Tennessee Gas system (later known as Tennessee Gas Pipeline), serving as a compressor station that pressurized and moved natural gas through the regional network. Typical operations at a facility like Station 827 included gas compression, dehydration and gas cooling, pressure control, pigging and line maintenance, metering, and continuous monitoring by operators, mechanics, electricians, and contractors. As with many mid-20th-century natural gas compressor stations, there was a potential for asbestos exposure, particularly before widespread phase-outs in the late 1970s and 1980s: asbestos-containing insulation, gaskets, valve packing, flange and pump gaskets, refractory and cement, and transite products were commonly used on hot piping, compressor exhaust systems, heaters/boilers, and associated equipment, and maintenance or removal activities could disturb these materials. Workers and tradespeople at or near Tennessee Gas Transmission Station 827 in Lecompte, LA could therefore have experienced direct or secondary asbestos exposures during inspections, repairs, or cleanup, depending on the materials in use at the time and the controls in place.

Tennessee Gas Transmission Station 827 in Lecompte, Louisiana is a compressor station on the interstate Tennessee Gas Pipeline system, a mid-20th-century network built to move natural gas from Gulf Coast supply areas through the Southeast to markets farther north; facilities like this typically house engine- or turbine-driven compressors to maintain line pressure, along with gas dehydration, filtration and measurement equipment, and pig launching/receiving infrastructure, and are operated and maintained by technicians under federal pipeline safety regulations. Because compressor stations constructed or upgraded during the mid-1900s commonly used asbestos-containing materials, possible asbestos exposure at Station 827 could have arisen historically from high-temperature pipe and equipment insulation, compressor and heater lagging, gaskets, packing, valve components, and asbestos-cement (transite) products, particularly during maintenance, repairs, or retrofits before widespread abatement in the 1980s; personnel most at risk would have included operators, mechanics, pipefitters, insulators, and contractors working on thermal systems. While specific, publicly documented details about Station 827's construction dates and equipment set are limited, its function within the Tennessee Gas Transmission Co. system in Lecompte, LA aligns with these typical operations and materials, and later safety programs and replacements likely reduced remaining asbestos hazards over time.

The Tennessee Gas Transmission Company - Monroe, LA facility was part of the Tennessee Gas Pipeline system (later known as Tennessee Gas Pipeline under subsequent corporate ownership), supporting interstate natural gas movement through northeast Louisiana. In Monroe, Louisiana, operations centered on running and maintaining transmission infrastructure such as compressor and meter facilities to maintain line pressure, monitor flow and safety systems, and perform repairs on pipelines, valves, and rotating equipment. As with many mid-20th-century gas transmission sites, possible asbestos exposure at this location could have arisen from insulation on high-temperature piping and equipment (including compressors, turbines, and boilers), as well as from asbestos-containing gaskets, packing, cement, and fireproofing, particularly during maintenance, overhauls, and insulation removal. Workers most likely to encounter asbestos included mechanics, pipefitters, insulators, welders, electricians, and laborers engaged in equipment servicing and facility upkeep.

The Tennessee Gas Transmission Company (later known as Tennessee Gas Pipeline) operated facilities in West Monroe, Louisiana that supported its interstate natural gas transmission system carrying Gulf Coast gas to markets in the Southeast and Northeast; these West Monroe, LA operations typically included compressor, metering, and line maintenance functions, staffed by operators, mechanics, pipefitters, and electricians, with corporate ownership transitioning over time from Tenneco to El Paso and now Kinder Morgan. As with many mid-20th-century gas transmission sites, potential asbestos exposure at the Tennessee Gas Transmission Company location could have arisen from insulation on hot piping and compressor exhausts, gaskets and packing in valves and flanged joints, boiler or heater components, and fireproofing or transite materials used in buildings, especially during installation, maintenance, repair, or removal activities prior to stricter controls put in place in the late 1970s and 1980s.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This notice pertains to Terrebonne Lumber & Supply Co in Amite, Louisiana.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred; this note pertains to Texaco - Burnside, LA in Burnside, Louisiana.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This refers to the Texaco location in Convent, Louisiana.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Texaco maintained petroleum storage and distribution operations in Sunshine, Louisiana, an unincorporated Mississippi River community in Iberville Parish south of Baton Rouge, supporting tank - farm and pipeline activities that moved crude oil and refined products through the Gulf Coast corridor; work at Texaco's Sunshine, LA location likely included operating and maintaining tanks, pumps, heaters, valves, and associated piping, as well as periodic maintenance turnarounds involving company crews and contractors. As at many mid - 20th - century oil and pipeline facilities, asbestos - containing insulation, refractory, gaskets, and packing were widely used on hot process equipment; as a result, operators, mechanics, pipefitters, insulators, welders, and other trades could have been exposed when installing, cutting, or removing these materials, especially before stricter controls and abatement programs took hold in the late 1970s and 1980s.

For Texaco - Union Station in Union Station, LA, there is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Texaco Inc maintained an ownership interest in the Convent refinery in Convent, LA through joint ventures (including Motiva Enterprises) during the late 1990s and early 2000s; the facility, located in St. James Parish along the Mississippi River industrial corridor, for decades processed crude oil into gasoline, diesel, jet fuel, LPG, and other products. Operations at the site included crude and vacuum distillation, conversion units such as catalytic cracking and/or hydrocracking, hydrotreating, reforming, sulfur recovery, utilities, large storage tank farms, and marine, pipeline, rail, and truck logistics, supported by ongoing maintenance and periodic turnarounds. As at many refineries of the era, asbestos-containing insulation, gaskets, packing, refractory, and fireproofing were historically used on high - temperature equipment and extensive piping systems - boilers, furnaces, heat exchangers, pumps, and compressors - creating potential exposure risks for insulators, pipefitters, boilermakers, mechanics, laborers, and contractors during installation, repair, or removal before modern abatement and control measures were fully implemented. The Convent, Louisiana facility has been a longstanding part of the region's downstream oil and gas economy under a succession of owners and joint ventures.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Texaco Inc's Bateman Lake Cycling Plant in Berwick, Louisiana, served the nearby Bateman Lake oil and gas field and functioned as a gas-cycling facility that compressed and cooled wet natural gas to condense heavier hydrocarbons (condensate and natural gas liquids), separated and stabilized those liquids, dehydrated and treated the remaining gas, and then routed the dry gas to sales pipelines or reinjection depending on field operations, using compressors, separators, heaters, heat exchangers, extensive piping, and storage. The plant fit the mid-20th-century Gulf Coast hydrocarbon processing network that supported regional production and employment in St. Mary Parish. As with many oil and gas plants of that era, possible asbestos exposure at the Texaco Inc - Bateman Lake Cycling Plant could have occurred from insulation on high - temperature piping and vessels, gaskets and packing in pumps and valves, fireproofing on structures, and components in boilers, heaters, turbines, and compressor systems; maintenance, repair, and turnaround activities prior to the widespread phaseout of asbestos-containing materials in the late 1970s and 1980s would have presented the highest risk.

The Texaco Inc Erath Cycling Plant in Erath, Louisiana was part of Texaco's South Louisiana natural gas infrastructure, operating as a gas processing and cycling facility that supported regional oil and gas production by receiving raw gas, compressing and dehydrating it, recovering natural gas liquids, and routing treated gas into distribution pipelines or for further handling. Located in Vermilion Parish, the plant employed operators, maintenance personnel, and contractors typical of gas plants, and it contributed to the local economy in Erath, LA through ongoing operations and periodic maintenance "turnarounds." As with many mid- to late-20th century oil and gas facilities, equipment and systems at a site like the Erath Cycling Plant commonly used asbestos-containing insulation, fireproofing, gaskets, and packing on high-temperature or high-pressure components such as piping, heaters, turbines, pumps, and valves; maintenance, repairs, or disturbance of these materials could have resulted in asbestos exposure for workers. While specific incident records are not cited here, the facility type, era, and standard industrial practices indicate a potential for asbestos exposure at this location.

Texaco operated the Floodway Gas Processing Plant in Berwick, Louisiana, a midstream facility that handled raw natural gas from regional gathering systems serving south Louisiana fields and nearby Gulf of Mexico production, performing typical gas-plant operations such as inlet separation, gas compression, dehydration, and recovery of natural gas liquids to produce pipeline-quality gas and NGLs for downstream markets; situated in Berwick, LA near the Atchafalaya floodway corridor, the plant functioned as part of Texaco's broader Gulf Coast infrastructure. Regarding possible asbestos exposure, gas processing plants of the mid-20th century commonly used asbestos-containing materials in thermal insulation on piping, boilers, heaters, exchangers, and turbines, and in gaskets and valve packing, so operators, pipefitters, insulators, welders, and maintenance contractors at the Floodway Gas Processing Plant could have faced potential asbestos exposure during maintenance, repairs, and turnarounds, particularly before modern controls and substitutions reduced such risks.

The Texaco Inc Henry Gas Processing Plant in Erath, Louisiana was an onshore natural gas processing facility in the Henry/Erath area that handled raw gas from regional fields and, at times, offshore production, performing standard plant operations such as inlet separation, dehydration, gas sweetening to remove acid gases when required, compression, and natural gas liquids recovery before delivering residue gas to interconnected pipelines serving the Henry area hub and sending extracted liquids to downstream markets. As with many mid-20th-century gas plants, equipment and infrastructure at the Erath, LA site would typically have included high-temperature piping, heaters or boilers, heat exchangers, turbines/compressors, and numerous valves and pumps, and historically these systems often incorporated asbestos-containing insulation, gaskets, and packing. Consequently, operators, maintenance personnel, pipefitters, insulators, and contractors working at the Texaco Inc - Henry Gas Processing Plant could have faced potential asbestos exposure during routine maintenance, turnarounds, or repair activities that disturbed aging insulation or gasket materials, with risks declining as asbestos use was phased out and controls improved.

For Texaco Inc. - Berwick, Louisiana, there is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

For Texaco Inc. - Union Station in Union Station, Louisiana, no detailed information describing the facility's operations or historical background has been located. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The Texaco Plant in Erath, Louisiana is referenced as part of Texaco's oil and gas infrastructure in Vermilion Parish, associated with natural gas processing and pipeline support that served regional onshore fields and nearby Gulf of Mexico production; operations at facilities of this type commonly included gas treating and dehydration, compression, liquids recovery, and distribution into interconnected pipelines around Erath, LA. As with many hydrocarbon processing plants built or maintained prior to the 1980s, asbestos-containing materials were widely used for high-heat service - particularly in pipe and vessel insulation, gaskets, valve packing, and fireproofing - creating potential asbestos exposure for workers and contractors during routine maintenance, repairs, and insulation removal before stricter controls and substitutions were adopted.

There is no additional information available on the Texaco Plant in Union, Louisiana, but it is on the list of sites where asbestos exposure may have occurred.

The Texaco Refinery in Convent, Louisiana is a large petroleum processing complex along the Mississippi River in St. James Parish that has operated under multiple owners and joint ventures over time, including Texaco, Motiva Enterprises, and Shell; the site historically ran as a full - conversion refinery with crude and vacuum distillation, hydrotreating, catalytic reforming, alkylation, fluid catalytic cracking and/or hydrocracking, sulfur recovery, and extensive utilities, storage, pipeline, and marine dock connections to produce gasoline, diesel, jet fuel, LPG, and other refined products for Gulf Coast and inland markets. Built and expanded during the mid - to - late 20th century, the facility reached a peak throughput of roughly 200,000 barrels per day and, after several ownership changes, was idled in 2020 amid broader portfolio restructuring. Like many refineries of its era, the Convent, LA site incorporated asbestos - containing materials for high - temperature insulation and fireproofing - such as pipe and equipment lagging, boiler and furnace insulation, gaskets, packing, and protective coatings - creating potential exposure risks particularly for pipefitters, insulators, boilermakers, maintenance and turnaround crews, and contractors, especially prior to the 1980s; while abatement programs and workplace controls later reduced hazards, legacy materials could still present risks during repair or demolition activities.

The Texaco, Inc. facility in Convent, Louisiana was a Mississippi River corridor petroleum refining and storage/transport complex that processed crude oil into fuels and other refined products; originally developed and operated by Texaco, it later became part of joint-venture and successor operations (including Motiva and Shell) commonly known as the Convent Refinery, serving regional markets via pipelines, marine docks, and tankage in St. James Parish. Typical refinery operations at this location included crude and vacuum distillation, hydrotreating and reforming, boilers and furnaces, steam and power generation, extensive piping networks, pumps, valves, heat exchangers, storage tanks, and loading facilities. Because refineries built and expanded during the mid-to-late 20th century frequently used asbestos-containing materials - such as thermal insulation on high-temperature piping and equipment, refractory linings in heaters and process units, and gaskets and packing - workers and contractors at the Texaco, Inc. site in Convent, LA could have faced asbestos exposure during maintenance, repairs, and turnarounds, particularly among insulators, pipefitters, boilermakers, and similar trades. No specific asbestos incident is documented here, but the age and industrial profile of this refinery indicate a potential for historical exposure.

Texas Company - Berwick, LA refers to a Texas Company (later Texaco) facility located in Berwick, Louisiana, within the Morgan City-Atchafalaya River oilfield corridor. While publicly available, site-specific details are limited, facilities of this type in coastal Louisiana generally supported petroleum storage and transfer, marine fueling and docking, and logistical support for exploration and production in the Gulf of Mexico. Given industry practices through the mid- to late-20th century, potential asbestos exposure at such operations could have arisen from insulation on piping, boilers, heaters, and storage vessels; asbestos-containing gaskets, packing, and brake linings; and maintenance or repair activities involving thermal systems on marine and terminal equipment. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This listing refers to Texas Company - Paradise, LA, a site in Paradise, Louisiana.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The Texas Pipeline Co - Logansport, LA site in Logansport, Louisiana was part of the Texas Pipeline Company's oil and natural gas transportation network along the Texas-Louisiana border, supporting pipeline operations such as transmission, pressure control, metering, and equipment maintenance for regional production and interstate delivery; facilities of this type typically included compressor or pump stations, valve yards, and maintenance shops. Historically, pipeline stations and related maintenance used asbestos-containing materials - such as pipe and equipment insulation, block and blanket insulation, gaskets, valve and pump packing, asbestos-cement (transite) products, and high-heat coatings - creating potential asbestos exposure for pipefitters, welders, mechanics, insulators, and laborers during installation, repair, or removal work that could release fibers. While detailed, site-specific public records for Texas Pipeline Co - Logansport, LA are limited, its role within mid-20th-century pipeline infrastructure and the industry's widespread use of asbestos indicate a credible potential for occupational exposure at this location.

The Texas Rice Milling Company facility in Crowley, Louisiana operated as a rice-processing mill serving local growers, where rough rice was received, dried, stored, and then cleaned, dehulled, milled, polished, graded, and packaged for distribution, reflecting Crowley's historic role as a regional rice hub. Publicly available details about this specific site are limited, but as a mid-20th-century style milling operation it likely relied on boilers, steam lines, dryers, and related process equipment to support parboiling, drying, and milling. Because asbestos-containing insulation, gaskets, and packing were commonly used on such thermal systems during that era, there was potential for asbestos exposure at the Texas Rice Milling Company in Crowley, LA - particularly for maintenance workers, boiler tenders, pipefitters, and millwrights who disturbed aging insulation or replaced heat-resistant components - while routine packaging and product handling presented lower risk.

Textile Mills Corporation in New Orleans, Louisiana was a textile-related facility; while detailed historical records on the New Orleans, LA location are limited, operations at such sites typically included warehousing, distribution, and maintenance of textile-handling equipment tied to the city's port and rail network, supporting Gulf Coast commerce. The site has been identified as a location where asbestos exposure may have occurred, as textile facilities and their buildings commonly used asbestos-containing materials before the late 1970s, including insulation on boilers and steam pipes, gaskets and packing in pumps and valves, dryer cans and felts, heat-resistant cloth, and building products such as roofing, siding, and floor tiles. Potentially affected groups would have included production employees, maintenance and insulation workers, contractors, and others present during repairs or renovations that disturbed aging materials.

The Borden Co. - Geismar, LA was a chemical manufacturing site in Geismar, Louisiana historically associated with Borden Chemical, a division of The Borden Company, and was known for producing formaldehyde and formaldehyde-based resins and intermediates used in wood products, laminates, and industrial adhesives. Located along the Mississippi River industrial corridor, the facility featured reactors, distillation and storage systems, and extensive steam and utility networks typical of resin and intermediates production, with operations later continuing under successor ownership following corporate restructurings. Like many Gulf Coast chemical plants built and expanded before the 1980s, the site likely incorporated asbestos-containing materials for thermal insulation on process and steam piping, boilers, heaters, and equipment, as well as asbestos gaskets, valve and pump packing, and refractory linings. Potential asbestos exposure would have been most significant during maintenance, repairs, and turnarounds when insulation and gaskets were disturbed, affecting occupations such as operators, pipefitters, insulators, millwrights, and contractors. Over time, abatement and substitution programs reduced these hazards, but legacy materials could have remained in older units and piping. These conditions indicate that asbestos exposure may have occurred at the Borden Co. facility in Geismar, Louisiana during earlier periods of operation.

The California Co., a predecessor to Chevron and a major Gulf Coast oil and gas operator, maintained exploration, production, and field-support activities in LaFourche, LA, serving nearby onshore marsh and offshore fields in Lafourche Parish through drilling and workover operations, production handling, gathering systems, tank batteries, compressors and dehydration units, pipelines, and marine logistics. In the mid-20th century, facilities of this type commonly incorporated asbestos-containing materials for heat and fire resistance - such as insulation on steam and process piping, boilers and heaters, and gaskets and packing in pumps and valves - and similar materials were also used on offshore platforms and support vessels, meaning maintenance, repairs, and equipment overhauls at the The California Co. site in LaFourche, LA presented potential asbestos exposure for workers and contractors.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. The California Co. - Jefferson, LA refers to a location in Jefferson, Louisiana associated by name only, with no public details on specific operations or facility history beyond its inclusion on asbestos exposure site lists.

For The First National Bank Towers in Lafayette, Louisiana, there is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This reference pertains to Theodoric Bland in New Orleans, LA.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The Thibodaux Division - Southdown Sugars Inc - Elmer Spur - Thibadaux, LA refers to a cane sugar processing and shipping site associated with Southdown Sugars Inc in Thibodaux, Louisiana, part of the state's long-established sugarcane industry; operations at facilities of this type typically included receiving harvested cane, crushing/milling, juice clarification and evaporation, crystallization and centrifuging to produce raw sugar, molasses handling, storage, and outbound shipment, with the "Elmer Spur" indicating a rail spur used to move product and bring in supplies and equipment for the mill and its steam and power systems. As with many sugar mills operating during the mid-20th century, there was potential for asbestos use in boiler and furnace insulation, evaporators and vacuum pans, steam lines and valves, dryers, pumps, and in gaskets, packing, and cements, creating possible asbestos exposure for boiler operators, pipefitters, millwrights, mechanics, electricians, laborers, and maintenance or contractor personnel, especially during repairs, overhauls, or insulation work before modern controls were adopted.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The Thomas B. Robertson was a World War II-era Liberty ship named for Louisiana governor and U.S. judge Thomas Bolling Robertson, and it was associated with port activity in New Orleans, Louisiana, where it moved military cargo during the war and later commercial goods through the Mississippi River-Gulf trade, with typical operations including cargo loading and discharge, bunkering, routine maintenance, and periodic repair work by shipyard and marine-service crews. As with other mid-20th-century merchant vessels, the Thomas B. Robertson incorporated asbestos-containing materials in boiler and engine-room insulation, pipe and valve lagging, gaskets, packing, cement, and fireproofing, creating potential exposure risks for engine-room personnel, machinists, electricians, insulators, deck and engineering crew, as well as New Orleans shipyard workers and longshoremen engaged in maintenance or repairs, particularly when disturbing worn or damaged insulation in confined spaces.

The site listed as Thomas C Hart (Uss) - New Orleans, LA refers to the Knox-class frigate USS Thomas C. Hart (originally DE-1092, later FF-1092), named for Admiral Thomas C. Hart and built at Avondale Shipyards in the New Orleans, Louisiana area in the early 1970s; the ship served with the U.S. Atlantic Fleet during the Cold War, performing anti-submarine warfare duties, convoy escort, and multiple deployments with the Sixth Fleet and NATO exercises before being decommissioned in the early 1990s and subsequently transferred abroad for further service. As with most U.S. Navy vessels of its era and shipyard practices around New Orleans, LA, asbestos-containing materials were widely used in machinery and berthing spaces, including pipe and boiler insulation, pumps, valves, gaskets, packing, adhesives, and deck tiles; this created potential asbestos exposure risks for Avondale shipyard workers involved in construction and overhaul, as well as for ship's crew - especially those working in engineering spaces, during maintenance, and during repairs conducted in port or at the shipyard.

Thomas F Cunningham in New Orleans, LA: There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The listing "Thomas Fitzsimons - New Orleans, LA" refers to the World War II Liberty ship SS Thomas Fitzsimons, a vessel associated with New Orleans, Louisiana's active shipbuilding, repair, and port operations during that era. Work tied to this location would have included hull and machinery outfitting, engine and boiler work, pipefitting, electrical installation, routine maintenance, repair and overhaul in port, and cargo handling - typical activities for Liberty ships calling at or serviced in New Orleans, LA. As with most WWII-era maritime work, asbestos-containing insulation, cement, gaskets, packing, and fireproofing were widely used in shipyards and aboard ships, especially around boilers, turbines, piping, and auxiliary machinery, creating potential exposure for shipyard workers, sailors, and contractors performing installation, lagging, repair, and removal in confined spaces. These conditions indicate that asbestos exposure could have occurred for personnel working on or around the SS Thomas Fitzsimons in New Orleans, with secondary exposure possible from contaminated clothing and tools.

The location known as Thomas Scott in New Orleans, Louisiana is identified, but specific operations or general background details are not available. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Thomas Sinnicksen in New Orleans, LA is referenced as a worksite location, but detailed background or operational history for this site is not available. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Thomas Sully And Company was located in New Orleans, Louisiana. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

Thru-Put - Kenner, LA is an identified site in Kenner, Louisiana. There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The site known as Tidewater Oil Co. / Fish Engineering Corp. in Houma, Louisiana is associated with the region's oil and gas support sector, linking Tidewater Oil Company's presence in the petroleum industry with Fish Engineering Corporation's engineering, fabrication, and maintenance services for energy projects in the Gulf Coast. Tidewater Oil Company was a major petroleum firm later incorporated into Getty Oil, while Fish Engineering Corporation operated as an engineering and construction contractor to the oil and gas industry; together they are the companies tied to the Houma, LA location. Given industry practices from the mid-20th century through the late 1970s, asbestos-containing insulation, gaskets, and packing were commonly used on piping, boilers, heaters, and rotating equipment, so pipefitters, insulators, welders, machinists, and maintenance personnel at this site could have experienced potential asbestos exposure during installation, repair, or removal of these materials. Specific, detailed public documentation about day-to-day operations at this facility is limited, but the location is included among workplaces where asbestos exposure may have occurred.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

For the site Tobias E. Stanbury in New Orleans, LA, there is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred.

The Todd Johnson Shipyard in New Orleans, Louisiana was a mid-20th-century ship repair and dry-docking operation historically associated with Johnson Iron Works/Dry Dock & Ship Repair and Todd Shipyards, supporting the busy Port of New Orleans by overhauling, converting, and maintaining naval and merchant vessels serving Gulf Coast trade. Typical work included hull repairs, machinery and boiler servicing, and outfitting, carried out by trades such as pipefitters, boilermakers, machinists, electricians, insulators, and welders. As with most U.S. shipyards operating before the late 1970s, asbestos-containing materials were commonly used for pipe and boiler insulation, gaskets and packing, turbines and pumps, cement, and fireproofing, creating potential asbestos exposure for workers during installation, cutting, removal, and cleanup, as well as for others in adjacent areas where dust could travel.

Todd Shipbuilding in Algiers, Louisiana, located in the New Orleans area on the west bank of the Mississippi River, functioned primarily as a ship repair and maintenance facility under the broader Todd Shipyards organization, servicing commercial and military vessels with overhauls, conversions, hull and machinery work, and shop support such as welding, machining, pipefitting, and painting during the mid-20th century. Like other shipyards of the era, the site likely handled drydocking and pier-side repairs, supporting traffic on the Lower Mississippi and Gulf Coast. Because asbestos-containing materials were widely used in ship construction and repair through the 1970s - including pipe and boiler insulation, turbine and pump insulation, gaskets, packing, cements, and refractory products - workers at Todd Shipbuilding in Algiers, LA, including insulators, pipefitters, boilermakers, machinists, electricians, welders, and laborers, could have been exposed during installation, maintenance, and removal activities, particularly in confined spaces aboard ships and in yard shops.

There is no additional information available on this site, but it is on the list of sites where asbestos exposure may have occurred. This note concerns Todd Shipbuilding in New Orleans, LA.

Todd Shipyard in Algiers, Louisiana was a Mississippi River ship repair and drydock facility operated by Todd Shipyards Corporation, supporting commercial and government vessels with hull repairs, machinery and electrical overhauls, coatings work, and vessel conversions. Situated on the west bank of the river across from downtown New Orleans, the site used floating drydocks and pier-side berths to service river, offshore, and oceangoing ships, employing trades such as shipfitters, welders, pipefitters, machinists, electricians, and insulators. Like most U.S. shipyards active through the mid-20th century and into the 1970s, operations at Todd Shipyard - Algiers, LA involved extensive use of asbestos-containing materials -  including pipe and boiler insulation, gaskets, packing, cements, and fireproofing on turbines and auxiliary equipment - so maintenance and refit work, especially in confined spaces, could have generated airborne asbestos dust and posed exposure risks to workers before stronger controls were adopted.