Embedded Files
Roller chain
Roller chain
Challenge Objective - 3D model a roller chain link of your own design and print a series of five links without print supports. When completed, the link should move as a roller-type chain.
Criteria:
Must be designed in SolidWorks
Prepared in a slicer for additive manufacturing
3D printed in PLA filament
An individual link cannot take up more space than 20mm²
Test prints (no more than two links) are required before full prints (no more than 5 links)
No slicer-generated supports allowed
note book design
roller joint solid works draft drawing
solid works design of each link
GIF roation of each link
20231027_094232.mp4video of the test print printing
image of test print in the slicer program
finished test print five in total changing something each time to make the finished product better
final chain five links long in the slicer program
GIF of the movement of the roller chain
image of the finished print
desk top topper
desk top topper
final product image solidworks
final product solidworks GIF
solid works test print
slicer image of test print
final print slicer image
slicer image broken down
slicer GIF of the final product
final product print
Page updated
Google Sites
Report abuse