One of my mom's old shirts that didn't fit her anymore
One of my grandma's old shirts that also didn't fit her anymore
One of my grandma's old shirts that she outgrew
The first step is to cut out the fabric. This was definitely a tedious part because I didn't use a pattern for this so I had to think throught the measurements. I used fabric from two shirts to cut out the waistband pieces. I wanted the waistband to be 28 in. because that's what my waist measurement was were I wanted the skirt to go, so I ensured I cut enough fabric plus seam allowance to attach the waistband pieces together. To cut out the pleats, I multiplied my waistband measurement by 3 because for pleats you need three times the fabric you would initially be using. I cut out as much fabric from the three shirts that I could that added up to be a 84 inches wide and as long as I could make it with the fabric provided. I also made sure to add about an inch on to each fabric because of the seam allowance needed to attach the different pleated sections together.
Once the fabric was cut out, it was time to get started on the pleats. I started to pleat the red gingham fabric first. This fabric was on the thinner side which means I had to change my needle to suit the fabric. I think for this skirt I mostly used a thinner needle, like a 60/8. To pleat, you have to fold the fabric back. I'm not great at explaining this part and it's better to see it visually, so I'll link a brief tutorial down below.
Here are the finished pleats once I sewed them down. I used a straight stitch and I also made sure to leave a section of fabric on the end for seam allowance so that I can attach this pleated piece to the next pleated piece. It's important to ensure that they are evenly spaced from each other and sewed down to an equal length.
The next step is to attach this pleated piece to one of the other pieces of fabric that is going to be pleated. I did this using a french seam because all the fabric I used is easy to fray so it would be best to protect the seams by having no raw edges sticking out. To do a french seam, first attach the pleat pieces to each other wrong sides together and sew using a quater inch seam allowance. After that, flip the skirtso that the right sides are touching each other and then sew the seam so that the raw edges are on the inside using a half inch seam allowance. I will link a tutorial for this below as well so that the visuals can help.
Pleats are similar to ruffles in the way that they add more fabric, but rather than bunching it together, it's folded.
French seams are used to ensure there are no raw edges when creating a seam. They can be used for delicate fabrics like silk and other thin materials.
This is what it looks like when the first seam is created for the french seam. It is located on the right side of the fabric. The next step is to flip the skirt inside out and create a seam on the inside.
This is the outside of the completed french seam! As you can see there are no raw edges on the outside as there were previously.
This is what the french seam looks like on the inside of the fabric.
Next, I stitched down the extra pleat that was there to make sure it matched the other pleats.
Repeat steps #4 and #5 with the third piece of fabric that needs to be pleated.
Repeat step #6.
Repeat step #6 and step #7.
This is all of the pleat pieces attached, just the blue peices aren't pleated yet.
Attach the waistband piece together with a french seam. (First, attach each piece wrong sides together so that it forms a circular piece.
Flip the waistband right sides together and finish the seam.
This is the waistband piece stitched together with no raw edges because we used a french seam.
Finish the pleats on one side and leave room on the raw edge for the pleat piece to be attached to the other side of the skirt.
Attach both raw sides of the blue pleat pieces together first with wrong sides togeher.
Flip the slip over and finish the french seam and also trim the extra skirt length if necessary. (I just cut the pieces wrong).
Finish the pleats on the last skirt section.
Attach the new pleated section to the remaining pleated piece.
Pin lace to top of skirt.
Pin waistband to skirt.
Attach waistband and lace together using straight stitch.
Attatch zipper
Iron and press down.
Pin and hem the skirt.