Session modes

The app allows you to select between the next modes:

• Laptimer mode
• OBD II mode
• Drag race mode
• Remote mode

Laptimer mode highlights:

• Designed to measure lap times for loop (start line = finish line) or point-to-point (start line ≠ finish line) tracks.
• Data is recorded during the whole session. The app does not record data if the speed is zero to avoid stopping the app during a short pit stop or in the starting grid of a race.
• Fully customizable screens: four different screen layouts that allow you to select the data shown, colors and size.
• Auto-create track option: the app automatically create a track when it detects that you have passed twice through the same point.
• Can be used to record data without selecting a track. A track can be applied at any time in the session list screen.

OBD II mode highlights:

• Designed to show OBD II parameters in realtime, with or without GPS signal.
• Displays the status of GPS, OBD and sensor signals.
• Data can be recorded pressing a button on the screen (if GPS is used).

Drag Race mode highlights:

• Designed to measure vehicle acceleration.
• Lights sequence to get reaction time.
• 0-100kph or 0-60mph time, 1/4 (400m) and 1/2(800m) time and speed.
• Use of GPS or OBD signals.

Designed to connect the device to another one by bluetooth for the following functions:

• Remote sensor: designed to use the device like a remote sensor unit. While the main device is using one of the above modes, the device in remote mode can be installed on the steering wheel or in the chassis of the byke to get sensor data.
• Remote camera: designed to use the device like an remote action camera. While the main device is using one of the above modes, the device in remote mode can be installed to record videos with data overlays.