Wooden Box

Drawling of final product. No edge protectors or wooden strips were added though

This is a calendar of all the things that happened on what dates

planing and chopping sawing the wood

after cutting one side in half making 2 thinner sides, sanded every side and glued them

after also cutting the top in half too and sanding them, they were glued to the sides

here are thinn wooden strips that were band sawed from a larger peice, but ended up not being put on

here is the plasma cutting of the corner guards

here is the vice I used to bend the corner protectors into shape with a hammer

here is the box being using a table saw

staining the box using gloves and a heavy duty paper towel

drilling pilot holes and using wire nails to secure the corner guards

drilling pilot holes and then used button head screws to secure hinges and the locking system