Arduino

ARDUINO IS AN OPEN-SOURCE PHYSICAL COMPUTING PLATFORM DESIGNED TO MAKE EXPERIMENTING WITH ELECTRONICS MORE FUN AND INTUITIVE. ARDUINO HAS ITS OWN UNIQUE, SIMPLIFIED PROGRAMMING LANGUAGE, A VAST SUPPORT NETWORK, AND THOUSANDS OF POTENTIAL USES, MAKING IT THE PERFECT PLATFORM FOR BOTH BEGINNER AND ADVANCED DIY ENTHUSIASTS.

20210915_134539.mp4

Circuit 1

In Circuit 1, I create a simple blinking light using an Arduino, resister, and a LED and using pre downloaded code through CODE.org.

Ci2.MOV

Code #2 link

Circuit 2

In Circuit 2, with a few cables and a Potentiometer were able regulate the blinking frequency.

Ci. 3

Code #3 link

Circuit 3

With a multicolor LED, some jumpers and a bit of code and we were able to get the LED to change colors.

20210917_135341.mp4

Code #4 link

Circuit 4

In this circuit we created a series of blinking LEDs that would go on in a certain sequence and then off in the opposite of that sequence.

20210917_140737.mp4

Code #5 link

CIRCUIT 5

In this circuit we added buttons to allow the LED to go off and on only when we want.

20210920_131631.mp4

Code #6 link

Circuit 6

With a light sensor, we were able to change the brightness of an LED based on the amount of light the sensor received.

20210920_133559.mp4

Code #7 link

Circuit 7

Adding a temp monitor, we were able to get accurate readings for the temperature of the room.

20210920_135124.mp4

Code #8 link

Circuit 8

In this circuit, we added a servo and gave it code to spin a certain rotation then quickly spin back to its origin.

20210920_135931.mp4

Code #9 link

Circuit 9

In this circuit, me and my friend wired and used a simple program to buzz a song while a LED flashes along with it.

Code #10 link

Circuit 10

This circuit was supposed to get the motor to spin, but even with multiple checks, getting other people to look at it and testing each component with multimeter, we were not able to get it to run.

20210921_140856.mp4

Code #11 link

Circuit 11

In this, we used a relay to make two LEDs switch between on and off at different times.

20210922_132257_1.mp4

Code #12 link

Circuit 12

This circuit we used and integrated circuit to get 8 LEDs to go off and back on in a certain synchronization.

Page updated

Google Sites

Report abuse