Publications
Prof. (Dr.) Chang Kook Hong (홍창국)
Journal Publications
SCI(E)
Sawanta S. Mali, Jyoti V. Patil, Jiang-Yang Shao, Yu-Wu Zhong, Sachin R. Rondiya, Nelson Y. Dzade and Chang Kook Hong, Phase-heterojunction all-inorganic perovskite solar cells surpassing 21.5% efficiency Nature Energy (Accepted on 26th June 2023) 8, pages 989–1001 (2023) https://doi.org/10.1038/s41560-023-01310-y
Sawanta S. Mali, Jyoti V. Patil, Julian A. Steele, Mohammad Khaja Nazeeruddin, Jin Hyeok Kim and Chang Kook Hong Energy Environ. Sci., 2024,17, 1046-1060 https://doi.org/10.1039/D3EE02763E
Jyoti V. Patil, Sawanta S. Mali, Sachin R. Rondiya, Nelson Y. Dzade and Chang Kook Hong Bilayered graded phase homojunction FA0.15MA0.85PbI3-based organic-inorganic hybrid perovskite solar cells crossing 22 % efficiency, Progress in Solid State Chemistry, 2024, 73, 100437. https://doi.org/10.1016/j.progsolidstchem.2023.100437
Sawanta S. Mali, J. V. Patil, J. A. Steele, Y. H. Jung, M. K. Nazeeruddin and Chang Kook Hong, Controlled crystallization and surface engineering of mixed-halide g-CsPbI2Br inorganic perovskites via guanidinium iodide additives in air-processed perovskite solar cells. Materials Today (Accepted on 7th May 2023) 2023, 67, 33-45 https://doi.org/10.1016/j.mattod.2023.05.006
Sachin R. Rondiya, Sawanta S. Mali, Anurag Roy, Gajendra Inwati, Ganesh K. Rahane, Yogesh A. Jadhav, Sunil Suresh, Tushar Debnath, Chang Kook Hong, and Nelson Y. Dzade Interfacial Band Offset Engineering with Barium-doping Towards Enhanced Performance of all Inorganic CsPbI2Br Perovskite Solar Cells, Physical Chemistry Chemical Physics (PCCP) (Accepted 21st July 2023) 2023,25, 29050-29060
Jyoti V. Patil, Sawanta S. Mali, Shivaji B. Sadale and Chang Kook Hong, Understanding the synergistic influence of the propylammonium bromide additive and erbium-doped CsPbI2Br for highly stable inorganic perovskite solar cells, Inorg. Chem. Front., 2023, https://doi.org/10.1039/D2QI02448A
Ganesh K. Chougule, Anita K. Tawade, Jayashri V. Kamble, Kiran Kumar K. Sharma, Sawanta S. Mali, Chang Kook Hong, Anil A. Powar, Kishor V. Gaikwad & Shivaji N. Tayade Electrochemical detection of dopamine using van der waals-interacted NiO–ZnO-functionalized reduced graphene oxide nanocomposite, Journal of Materials Science: Materials in Electronics , 2024, 35, 301. https://doi.org/10.1007/s10854-024-11950-9
Yogita S. Patil*, Neelima A. Patil, Ganesh L. Agawane, S.S. Mali, C.K. Hong Effect of Lanthanum Doping on Properties of ZnS Thin Films for Water Splitting, Solid State Phenomena, 2023, 350, 109-114, DOI: https://doi.org/10.4028/p-S8c4Xg
N.S. Shaikh, J.S. Shaikh, V. Marquez, S.C. Pathan, S.S. Mali, J.V. Patil, C.K. Hong, P. Kanjanaboos, O. Fontaine, A. Tiwari, S. Praserthdam, P. Praserthdam, New perspectives, rational designs, and engineering of Tin (Sn)-based materials for electrochemical CO2 reduction, Materials Tody Sustainability, 2023, 22, 100384 https://doi.org/10.1016/j.mtsust.2023.100384
Jyoti V. Patil, Sawanta S. Mali, Chang Kook Hong, Grain size enlargement and controlled crystal growth by formamidinium chloride additive-added γ-CsPbI2Br thin films for stable inorganic perovskite solar cells, Materials Today Chemistry, accepted 29th July 2022. https://www.sciencedirect.com/science/article/pii/S2468519422003470
Sumayya C. Pathan, Navajsharif S. Shaikh, Sawanta S. Mali, Jyoti V. Patil, Pranav K. Katkar, Navnath S. Padalkar, Supareak Praserthdam, Chang Kook Hong, Pongsakorn Kanjanaboos, Jasmin S. Shaikh, Unlocking the potential of La-doped iron oxide @graphene oxide and ionic liquid-based asymmetric supercapacitor, Journal of Energy Storage, 2022, 105642 https://doi.org/10.1016/j.est.2022.105642
Komal B. Pisal, Bapuso M. Babar, Sarfraj H. Mujawar, Sawanta S. Mali, Chang Kook Hong, Shrikrishna D. Sartale, Laxman D. Kadam, MoS2 Nanosheets as Bifunctional Electrode for Oxygen Evolution Reaction and Electrochemical Supercapacitor, International Journal of Energy Research, Accepted 17th July 2022. https://doi.org/10.1002/er.8447
Jyoti V. Patil, Sawanta S. Mali, Chang Kook Hong, Shrinking the Defects of Perovskite Surface by Ethylammonium Bromide Additive-Assisted γ-CsPbI2Br Inorganic Perovskite Solar Cells with Large Grain Size, ACS Applied Materials & Interfaces, 2022.
Sawanta S. Mali, Jyoti V. Patil, Sachin R. Rondiya, Nelson Y. Dzade, Julian A. Steele, Mohammad Khaja Nazeeruddin, Pramod S. Patil, Chang Kook Hong Terbium-doped and dual passivated γ−CsPb(I1-xBrx)3 inorganic perovskite solar cells with improved air-thermal stability and high efficiency, Advanced Materials, 2022 (11th May 2022). https://doi.org/10.1002/adma.202203204
Sawanta S. Mali, Jyoti V. Patil, Dae Woong Park, Young Hee Jung, Chang Kook Hong Intrinsic and extrinsic stability of triple-cation perovskite solar cells through synergistic influence of organic additive, Cell Reports Physical Science 3, 100906 June 15, 2022, https://doi.org/10.1016/j.xcrp.2022.100906
J. V. Patil, Sawanta S. Mali, Chang Kook Hong, A Thioacetamide Additive-based Hybrid (MA0.5FA0.5)PbI3 Perovskite Solar Cells crossing 21 % Efficiency with Excellent Long Term Stability, Mater. Today Chem. (Accepted 16th April 2022)
N. S. Shaikh, Sawanta S. Mali, J.V. Patil, A.I. Mujawar, J. S. Shaikh, S. C. Pathan, S. Praserthdam, C. K. Hong, P. Kanjanaboos, Mg2+ ion-Powered Hybrid Supercapacitor with β-MnO2 as a Cathode and α-Fe2O3 as an Anode , Journal of Energy Storage, Accepted on 22nd March 2022. 50, 104525, 2022. https://www.sciencedirect.com/science/article/pii/S2352152X2200545X
Chang Kook Hong et al., Interface Engineering of Mesoscopic Perovskite Solar Cells by Atomic Layer Deposition of Ta2O5 https://pubs.acs.org/doi/full/10.1021/acsaem.1c00367
B. B. Kamble, P. Talele, An. K. Tawade, K. K. Sharma, Sawanta S. Mali, C. K. Hong and S. N. Tayade, In situ soft templated synthesis of polyfluorene-molybdenum oxide (PF-MoO3) nanocomposite: A nanostructure glucose sensor, Korean J. Chem. Eng., 2022, DOI: 10.1007/s11814-021-1010-2 https://link.springer.com/article/10.1007/s11814-021-1010-2
Satish S. Patil, Sameer N. Nadaf, Kishorkumar V. Khot, Rahul M. Mane, Suhas S. Mohite, Sawanta S. Mali, Chang Kook Hong, Popatrao N. Bhosale, A Efficient Cu2Zn1-xInxSn(S,Se)4 Multicomponent Photocathode via One-Step Hydrothermal Approach for Thin Film Solar Cell, Journal of Materials Chemistry C (accepted on 8th Jan 2022) J. Mater. Chem. C, 2022,10, 3447-3460 https://doi.org/10.1039/D1TC04942A
Parag R. Patil, Satish S. Patil, Tukaram D. Dongale, Rahul M. Mane, Sharad S. Patil, Sawanta S. Mali, Chang K. Hong, Popatrao N. Bhosale, Jaeyeong Heo, Kishorkumar V. Khot, Hydrothermally synthesized nanocrystalline photoactive SnS2 thin films: Effect of surface directing agent, New Journal of Chemistry, (Accepted Dec 2021) DOI https://doi.org/10.1039/D1NJ04361G
Ramesh J. Deokate, Harish S. Chavan, Suraj C. Bulakhe, Sachin B. Tanwade, Sarfraj H. Mujawar, Sawanta S. Mali, Chang Kook Hong, Hyunsik Im, Akbar I. Inamdar, Electrodeposited bimetallic microporous MnCu oxide electrode as a highly stable electrocatalyst for oxygen evolution reaction, Int. J. Energy Res. 2021;1–11.
Sandeep B. Wategaonkar, Vinayak G. Parale, Sawanta S. Mali, Chang Kook Hong, Rani P. Pawar, Parvejha S. Maldar, Annasaheb V. Moholkar, Hyung-Ho Park, Balasaheb M. Sargar and Raghunath K. Mane, Influence of tin doped TiO2 nanorods on dye sensitized solar cell, Materials (Accepted 17th Oct 2021) 2021, 14(21), 6282. https://www.mdpi.com/1996-1944/14/21/6282
Sangram P. Bhoite, Jonghyuck Kim, Wan Jo, Pravin H. Bhoite, Sawanta S. Mali, Kyu-Hwan Park, and Chang-Kook Hong, Expanded Polystyrene Beads Coated with Intumescent Flame Retardant Material to Achieve Fire Safety Standards, Polymers 2021, 13(16), 2662. https://www.mdpi.com/2073-4360/13/16/2662
Sawanta S. Mali, Jyoti V. Patil, Julian A. Steele, Chang Kook Hong, Ambient processed and stable all-inorganic lead halide perovskite solar cells with efficiencies nearing 20% using a spray coated Zn1−xCsxO electron transport layer, Nano Energy, (accepted 3rd Oct 2021) 2021, 90, A, 106597.
J. V. Patil, Sawanta S. Mali, D. W. Park, C. K. Hong, Novel ytterbium-doped CsPbI2Br thin films based inorganic perovskite solar cells towards improved phase stability Material Today Chemistry, (Accepted Aug 2021) 2021, 22, 100557.
Sameer N. Nadaf; Satish S. Patil; Vilasrao A. Kalantre; Sawanta S. Mali; Chang Kook Hong; Sambhaji R. Mane; Prof.P. N. Bhosale Optimization and comparative analysis of Cs ion intercalated H3PMO12O40 photocathode: One step hydrothermal strategy", Journal of Materials Science: Materials in Electronics (Accepted on 5th Aug 2021) 32, 22921–22935 (2021).
Chang Kook Hong et al., Band alignment and carrier recombination roles on the open circuit voltage of ETL-passivated perovskite photovoltaics, https://onlinelibrary.wiley.com/doi/full/10.1002/er.7542
Chang Kook Hong et al., Mesoscopic TiO2/Nb2O5 Electron Transfer Layer for Efficient and Stable Perovskite Solar Cells, https://onlinelibrary.wiley.com/doi/full/10.1002/admi.202100177
Chang Kook Hong at al., Azahomofullerenes as New n-Type Acceptor Materials for Efficient and Stable Inverted Planar Perovskite Solar Cells, https://pubs.acs.org/doi/full/10.1021/acsami.1c01685
Sagar V. Kite, Abhijit Nanaso Kadam, Dattatraya J. Sathe, Satish Patil, Sawanta S. Mali, Chang Kook Hong, Sang-Wha Lee, Kalyanrao M. Garadkar, Nanostructured TiO2 Sensitized with MoS2 Nanoflowers for Enhanced Photodegradation Efficiency towards Methyl Orange, ACS Omega (Accepted on 15th June 2021)
S. Wategaonkar Sawanta S. Mali et al., Structural, morphological, and optical studies of hydrothermally synthesized Nb-added TiO2 for DSSC application, Ceramics International accepted on 27th May 2021.
Chang Kook Hong et al., Gold Nanoparticles Functionalized with Fullerene Derivative as an Effective Interface Layer for Improving the Efficiency and Stability of Planar Perovskite Solar Cells, https://onlinelibrary.wiley.com/doi/full/10.1002/admi.202001144
Chang Kook Hong et al., Surface Treatment of Perovskite Layer with Guanidinium Iodide Leads to Enhanced Moisture Stability and Improved Efficiency of Perovskite Solar Cells https://onlinelibrary.wiley.com/doi/full/10.1002/admi.202000105
Satish Patil, Sameer Nadaf, Sawanta S. Mali, Chang Kook Hong, Popatrao Bhosale, Optoelectronic and Photovoltaic Properties of Cu2ZnSnS4 Photocathode via Temperature Dependent Facile Hydrothermal Route, Industrial & Engineering Chemistry Research, Accepted on 8th May 2021. https://pubs.acs.org/doi/abs/10.1021/acs.iecr.1c00801
Hye-Seon Park and Chang-Kook Hong, Anion Exchange Membrane Based on Sulfonated Poly (Styrene-Ethylene-Butylene-Styrene) Copolymers Polymers 2021, 13(10), 1669; https://doi.org/10.3390/polym13101669.
Hye-Seon Park andChang-Kook Hong Relationship between the Stereocomplex Crystallization Behavior and Mechanical Properties of PLLA/PDLA Blends Polymers 2021, 13(11), 1851; https://doi.org/10.3390/polym13111851
H.-B. Kim, D. T. Ngo, R. Verma, Y. N. Singhbabu, D. Y. Kim, H. T.T. Le, S. S. Mali, C.-K. Hong, C.-J. Park, Vanadium nitride and carbon nanofiber composite membrane as an interlayer for extended life cycle lithium-sulphur batteries, Ceramic International, https://doi.org/10.1016/j.ceramint.2021.04.159
J. V. Patil, S. S. Mali, C. K. Hong, Fully-Inorganic Strontium Incorporated CsPbI2Br Perovskite Solar Cells with Promoted Efficiency and Stability, Journal of Energy Chemistry (accepted on 3rd April 2021)
Satish S. Patil, Rahul M. Mane, Kishorkumar V. Khot, Sawanta S. Mali, Chang Kook Hong, Popatrao N. Bhosale, Surfactant Assisted Approach to Development of Efficient WO3 Photoanode for Natural Dye Sensitized Solar Cell, Solar Energy (accepted 10th March 2021) 2021, 220, 371-383.
R. C. Patil, A. A. Jagdale, U.P. Patil, J. S. Ghodake, S. S. Mali, C. K. Hong & S. S. Patil Agro-Waste Generated Pd/CAP-Ash Catalyzed Ligand-Free Approach for Suzuki–Miyaura Coupling Reaction Catalysis Letters 7th March 2021, https://doi.org/10.1007/s10562-021-03597-6
Cover Image: Sawanta S. Mali, Jyoti V. Patil, Pravin S. Shinde, Chang Kook Hong, Enhanced fill factor for normal n-i-p planar heterojunction and mesoscopic perovskite solar cells using ruthenium-doped TiO2 electron transporting layer", Progress in Photovoltaics: Research and Applications (28th January 2021) Volume29, Issue2 February 2021 Pages i-i https://doi.org/10.1002/pip.3393
Sawanta S. Mali, Jyoti V. Patil, Julian A. Steele, Sachin Rondiya, Nelson Dzade, Chang Kook Hong, Implementing Dopant-Free Hole Transporting Layers and Metal Incorporated CsPbI2Br for Stable All-Inorganic Perovskite Solar Cells", ACS Energy Letters Accepted on 2nd Dec 2020. DOI: 10.1021/acsenergylett.0c02385
Bhagyashri B. Kamble, Balu D. Ajalkar, Anita K. Tawade, Kirankumar K. Sharma, Sawanta S. Mali, Chang Kook Hong, Chinna D. Bathula, Abhijit N. Kadam, Shivaji N. Tayade , Ionic liquid assisted synthesis of h-MoO3 hollow microrods and their application for electrochemical sensing of Imidacloprid pesticide in vegetables, Journal of Molecular Liquids, Accepted date: 16 December 2020 https://doi.org/10.1016/j.molliq.2020.115119
Sawanta S. Mali, Jyoti V. Patil, Pravin S. Shinde, Gustavo de Miguel, and Chang Kook Hong, Fully Air-Processed Dynamic Hot-Air-Assisted M:CsPbI2Br (M: Eu2+, In3+) for Stable Inorganic Perovskite Solar Cells, Matter-Cell Press, (accepted on5th Nov 2020 ) https://doi.org/10.1016/j.matt.2020.11.008
Krishna K. Pawar, Sawanta S. Mali, Yuvraj H. Navale, Vikas B. Patil, Kiran K. Sharma, Chang K. Hong, Pramod S. Patil, Fabrication of enhanced sensitive and selective porous indium oxide nanocube sensor for NO2 detection, Ceramics International 2020, https://doi.org/10.1016/j.ceramint.2020.09.085 Volume 47, Issue 2, 15 January 2021, Pages 2430-2440
Chang Kook Hong et al., Atomic Layer Deposition of an Effective Interface Layer of TiN for Efficient and Hysteresis-Free Mesoscopic Perovskite Solar Cellshttps://pubs.acs.org/doi/full/10.1021/acsami.9b18082
T. S. Bhat, S. S. Mali, J. V. Patil, S. T. Killedar, T. R. Desai, A. N. Patil, C. K. Hong, T. D. Dongale, P. S. Patil, Nanogranular Cadmium Sulfoselenide Thin Films Grown by SILAR Method for Optoelectronic Applications, Physica Status Solidi (a), 2020, 2000002.
Sajid B. Mullani, Anita K. Tawade, Shivaji N. Tayade, Kiran Kumar K. Sharma, Shamkumar P. Deshmukh, Navaj B. Mullani, Sawanta S. Mal, Chang Kook Hong, B. E. Kumara Swamy, Sagar D. Delekar, Synthesis of Ni2+ ions doped ZnO-MWCNTs nanocomposites using in-situ sol-gel method: An ultra sensitive non-enzymatic uric acid sensing electrode material, RSC Advances 2020, 10, 36949–36961 (Accepted 30th Sept 2020)
Jyoti Patil, Sawanta S. Mali, Chang Kook Hong, Boosting the Stability of Fully-Inorganic Perovskite Solar Cells through Samarium Doped CsPbI2Br Perovskite" ACS Sustainable Chemistry & Engineering (Accepted on 22nd Sept 2020)
Sawanta S. Mali, Jyoti V. Patil, Pravin S. Shinde, Chang Kook Hong, Enhanced fill factor for normal n-i-p planar heterojunction and mesoscopic perovskite solar cells using ruthenium-doped TiO2 electron transporting layer", Progress in Photovoltaics: Research and Applications (accepted on 21st Sept 2020) 2021, 29 (2), 159-171 https://doi.org/10.1002/pip.3352
S. V. Patil, V. B. Ghanwat; S. S. Mali; R. M. Mane; C. K. Hong; P. N. Bhosale, Synthesis, characterization and photoelectrochemical performance of nanocrystalline ternary MoxBi(2-x)Se3 mixed metal chalcogenide thin films, Journal of Materials Science: Materials in Electronics, 27th Aug 2020. https://doi.org/10.1007/s10854-020-04363-x.
Chang Kook Hong et al., Double layer mesoscopic electron contact for efficient perovskite solar cells, https://pubs.rsc.org/en/content/articlehtml/2020/se/c9se01051c
Sameer N. Nadaf, Satish S. Patil, Vilasrao A. Kalantre, Sawanta S. Mali, Chang Kook Hong, Sambhaji R. Mane, P. N. Bhosale, Cesium doped H3PW12O40 nanocrystalline thin films using single-step hydrothermal route and its photoelectrochemical properties, Journal of Materials Science: Materials in Electronics, 26th Aug 2020. https://doi.org/10.1007/s10854-020-04361-z
Monika P. Joshi, Sawanta S. Mali, Chang Kook Hong, Popatrao N. Bhosale, Morphological engineering of novel nanocrystalline Cu2Sn(S,Se)3 thin film through annealing temperature variation: Assessment of photoelectrochemical cell performance, Materials Science in Semiconductor Processing 120 (2020) 105218
Satish S. Patil, Kishorkumar V Khot, Sawanta S. Mali, Chang Kook Hong, and Popatrao N. Bhosale, Investigating the Role of Selenium Ion Concentration on Optoelectronic Properties of the Cu2ZnSn(S1-xSex)4 Thin Films, Ind. Eng. Chem. Res., (Cover image) https://pubs.acs.org/toc/iecred/59/23
J. V. Patil, Sawanta S. Mali, Chang Kook Hong, Efficient and stable all-inorganic niobium incorporated CsPbI2Br based perovskite solar cells, ACS Applied Materials & Interfaces, Accepted 19th may 2020. https://pubs.acs.org/doi/10.1021/acsami.0c04577
Monika P. Joshi, Sawanta S. Mali, Chang Kook Hong, and Popatrao N. Bhosale Morphological engineering of novel nanocrystalline Cu2Sn(S,Se)3 thin film through annealing temperature variation: assessment of photoelectrochemical cell performance, Materials Science in Semiconductor Processing, Accepted on 19th May 2020.
Chang Kook Hong et al., Effect of CsCl Additive on the Morphological and Optoelectronic Properties of Formamidinium Lead Iodide Perovskite https://onlinelibrary.wiley.com/doi/full/10.1002/solr.201900294
Satish S. Patil, Kishorkumar V Khot, Sawanta S. Mali, Chang Kook Hong, and Popatrao N. Bhosale, Investigating the Role of Selenium Ion Concentration on Optoelectronic Properties of the Cu2ZnSn(S1-xSex)4 Thin Films, Ind. Eng. Chem. Res., 19th May 2020, DOI: 10.1021/acs.iecr.0c00294, https://pubs.acs.org/doi/10.1021/acs.iecr.0c00294
A.P. Patil, K. A. Nirmal, Sawanta S. Mali, C. K. Hong, T. G. Kim, P. S. Patil, T. D. Dongale, Tuning the analog and digital resistive switching properties of TiO2 by nanocompositing Al-doped ZnO, Materials Science in Semiconductor Processing 115 (2020) 105110
S. S. Patil, R. M. Mane, Sawanta S. Mali, C. K. Hong, P. N. Bhosale, Facile designing and assessment of photovoltaic performance of hydrothermally grown kesterite Cu2ZnSnS4 thin films: Influence of deposition time, Solar Energy 201, 102-115.
A. Khan, N. Y. Bhosale, Sawanta S. Mali, C. K. Hong, A.V. Kadam, Reduced graphene oxide layered WO3 thin film with enhanced electrochromic properties, Journal of Colloid and Interface Science, 571, 2020, 185-193
Sawanta S. Mali, Jyoti V. Patil, Chang Kook Hong, Making air-stable all-inorganic perovskite solar cells through dynamic hot-air, Nano Today 20th April 2020. https://doi.org/10.1016/j.nantod.2020.100880.
J. V. Patil, Sawanta S. Mali, C. K. Hong, "A-site rubidium cation incorporated CsPbI2Br all-inorganic perovskite solar cells exceeding 17 % efficiency, Solar RRL, (Accepted 14th April 2020) https://doi.org/10.1002/solr.202000164
Sawanta S. Mali Chang kook Hong, Back-cover page, Perovskite Solar Cells: Simultaneous Improved Performance and Thermal Stability of Planar Metal Ion Incorporated CsPbI2Br All‐Inorganic Perovskite Solar Cells Based on MgZnO Nanocrystalline Electron Transporting Layer Advanced Energy Materials, (Adv. Energy Mater. 3/2020) https://onlinelibrary.wiley.com/doi/abs/10.1002/aenm.202070012
Ramesh J. Deokate, Sarfraj H. Mujawar, Harish S. Chavan, Sawanta S. Mali, Chang Kook Hong, Hyunsik Im, Akbar I. Inamdar, Chalcogenide nanocomposite electrodes grown by chemical etching of Ni‐foam as electrocatalyst for efficient oxygen evolution reaction, Int. J. Energy Res. 2019;1–11. DOI: 10.1002/er.5018
Sawanta S. Mali, Jyoti V. Patil and Chang Kook Hong, Formation of Kirkendall void of lead-sulfide cubes, Materials Today, 2020, 40 (Uncover) https://www.materialstoday.com/materials-today-cover-competition-2019/ https://www.sciencedirect.com/science/article/pii/S1369702120303400
Namdev S. Harale , Amruta B. Nagare, Sawanta S. Mali, Mahesh P. Suryawanshi, Kiran Kumar K. Sharma, Vepa K. Rao, Chang Kook Hong, Jin H. Kim, and Pramod S. Patil, Facile Synthesis of Nanofibrous Polyaniline Thin Films for Ammonia Gas Detection, Journal of ELECTRONIC MATERIALS https://doi.org/10.1007/s11664-019-07778-3 2020, 49, 1338–1347.
Sawanta S. Mali, Jyoti V. Patil and Chang Kook Hong, Simultaneous Improved Performance and Thermal Stability of Planar Metal Ion Incorporated CsPbI2Br All-Inorganic Perovskite Solar Cells Based on MgZnO Nanocrystalline Electron Transporting Layer, Advanced Energy Materials (Accepted on 11th Nov 2019) DOI: 10.1002/aenm.201902708.
Krishna Pawar, Latika Choudhary, Sawanta Mali, Tejaswinee Bhat, Arif shaikh, Chang Kook Hong and Pramod S. Patil, In2O3 nanocapsules for rapid photodegradation of Crystal violet dye under sunlight, Journal of Colloid and Interface Science (Accepted 27th Oct 2019) 561, 2020, 287-297.
Jyoti V. Patil, Sawanta S. Mali, Chang Kook Hong, Thiourea additive based quadruple cation lead halide perovskite with ultra large grain size for efficient perovskite solar cells, Nanoscale, Accepted 22nd Oct 2019. https://pubs.rsc.org/en/content/articlelanding/2019/nr/c9nr07377a#!divAbstract DOI: 10.1039/C9NR07377A
Jyoti V. Patil, Sawanta S. Mali, Akhilesh P. Patil, Pramod S. Patil, Chang Kook Hong, Highly efficient mixed-halide mixed-cation perovskite solar cells based on rGO-TiO2 composite nanofibers, Energy (accepted on 18th Oct 2019) https://doi.org/10.1016/j.energy.2019.116396
Satish S. Patil, Sawanta S. Mali, Chang Kook Hong, P. N. Bhosale, Designing of Novel Efficient Photoactive Ternary Zn1-xCu2xSe Thin Film Materials Via Hydrothermal Route: Photoelectrochemical (PEC) Cell Study Corresponding author: Professor Popatrao Bhosale, Materials Science in Semiconductor Processing, Accepted (7th Sept 2019) 105, 2020, 104727.
Jyoti Patil, Sawanta Mali, Jasmin Shaikh, Akhilesh Patil, Pramod S. Patil, Chang Kook Hong, Influence of reduced graphene oxide-TiO2 composite nanofibers in organic indoline DN350 based dye sensitized solar cells, Synthetic Metals, (Accepted 13th August 2019) 2019, 256, 116146
Sawanta S Mali, Jyoti V. Patil, Chang Kook Hong Hot-air assisted fully air-processed barium incorporated CsPbI2Br perovskite thin films for highly efficient and stable all-inorganic perovskite solar cells. Nano Letters (accepted 1st Aug 2019) https://pubs.acs.org/doi/10.1021/acs.nanolett.9b02277
Jasmin S. Shaikh, Navajsharif S. Shaikh, Sawanta S. Mali, Jyoti V. Patil, Sonali A. Beknalkar, Akhilesh P. Patil,N. L.Tarwal, Pongsakorn Kanjanaboos, Chang Kook Hong, Pramod S. Patil, Quantum dot based solar cells: Role of nanoarchitectures, perovskite quantum dots and charge transporting layers, ChemSusChem (Review) accepted 22th July 2019 https://doi.org/10.1002/cssc.201901505
Chang Kook Hong et al., Ruthenium doped mesoporous titanium dioxide for highly efficient, hysteresis-free and stable perovskite solar cells https://www.sciencedirect.com/science/article/pii/S0038092X19304451
Krishna K. Pawar, Jasmin S. Shaikh, Sawanta S. Mali, Yuvraj H. Navale, Vikas B. Patil, Chang K. Hong, Pramod S. Patil, Hollow In2O3 microcubes for sensitive and selective detection of NO2 gas, Journal of Alloys and Compounds, https://doi.org/10.1016/j.jallcom.2019.07.248 Accepted Date: 20 July 2019
Sawanta S. Mali, Jyoti V. Patil, Hamidreza Arandiyan and Chang Kook Hong Reduced methylammonium, triple-cation Rb0.05(FAPbI3)0.95(MAPbBr3)0.05 perovskite solar cells based on TiO2/SnO2 bilayered electron transporting layer approaching stabilized 21% efficiency: Role of antisolvent, J. Mater. Chem. A, 2019,7, 17516-17528 (Accepted on 27th June 2019
Sawanta S. Mali, Jyoti V. Patil, Hamidreza Arandiyan, Rafael Luque, Chang Kook Hong, "Stability of Unstable Perovskites: Recent Strategies for Making Stable Perovskite Solar Cells" The Electrochemical Society Journals (Accepted on 5th June 2019). 2019, 8, Q111 (Editor’s Choice)
Jyoti Patil, Sawanta Mali; Akhilesh Patil; Pramod Patil; Chang Kook Hong, "Electrospun TiO2 nanofibers for metal free indoline dye sensitized solar cells" Journal of Materials Science: Materials in Electronics (accepted on 28th May 2019)
M. Joshi, K. Khot, S. Patil, Sawanta S. Mali, C. K. Hong, P. N. Bhosale, Investigating the light harvesting capacity of sulfur ion concentration dependent SnS2 thin films synthesized by self assembled arrested precipitation technique, Materials Research Express, (accepted 22 May 2019)
Amruta B. Nagare, Namdev S. Harale, Sawanta S. Mali, Sarita S. Nikam, Pramod S. Patil, Chang Kook Hong, Annasaheb V. Moholkar, Chemiresistive Ammonia Gas Sensor Based on Branched Nanofibrous Polyaniline Thin Films Journal of Materials Science: Materials in Electronics (accepted on 14th May 2019)
Arif D. Sheikh, Akhilesh P. Patil, Sawanta S. Mali, Chang K. Hong, and Pramod S. Patil New insights into active-area-dependent performance of hybrid perovskite solar cells, J. Mater. Sci. (2019) 54:10825–10835
Jyoti V. Patil, Sawanta S. Mali, Jasmin S. Shaikh, Akhilesh P. Patil, Pramod S. Patil, Chang Kook Hong, Efficient mixed halide perovskite solar cells via solvent engineering process, Dyes and Pigments, 168, 311-316, 2019.
Sawanta S. Mali, Jyoti V. Patil, Hyungjin Kim and Chang Kook Hong, A ‘Smart-Bottle’ humidifier assisted air-processed CuSCN inorganic hole extraction layer towards highly-efficient, large-area and thermally-stable perovskite solar cells, J. Mater. Chem. A, 2019, 2nd April 2019, 2019,7, 10246-10255
Sawanta S. Mali, Jyoti V. Patil, Hyungjin Kim and Chang Kook Hong, Gallium cationic incorporation in compact TiO2 as an efficient electron transporting layer for stable perovskite solar cells, Matter-Cell Press (accepted on 15th March 2019)
Sawanta S. Mali, Jyoti V. Patil, Hyungjin Kim, Rafael Luque and Chang Kook Hong, Highly efficient thermally-stable perovskite solar cells via Cs:NiOx/CuSCN double inorganic hole extraction layer interface engineering, Materials Today, Accepted 28th Jan 2019 https://doi.org/10.1016/j.mattod.2019.01.017
Krishna Pawar, Dhanashri Desai, Shraddha Bodake, Harshada Patil, Suraj More, Ajay Nimbalkar, Sawanta S. Mali, Chang Kook Hong, Sungjun Kim, Pramod S Patil, Highly reliable multi-level resistive switching in nanoparticulated In2O3 thin film memristive device, Journal of Physics D: Applied Physics, 24th Jan 2019 DOI: 10.1088/1361-6463/ab01a9
Anamika V. Kadam, Nilam Y. Bhosale, Shubham B. Patil, Sawanta S. Mali, Chang K. Hong, Fabrication of an electrochromic device by using WO3 thin films synthesized using facile single-step hydrothermal process, Thin Solid Films (Accepted 8th January 2019)
Sawanta S. Mali, Jyoti V. Patil, Hyungjin Kim, HyunHoon Kim, and Chang Kook Hong, A dual-retarded reaction processed mixed-cation perovskite layers for high-efficiency solar cells, Advanced Functional Materials (Accepted 8th January 2019)
S. D. Kharade, N. B. Pawar, S. S. Mali, C.K. Hong, P. N. Bhosale, Effect of Molybdenum Content on the Optostructural, Morphological and Photoelectrochemical Properties of Bi2Se3 Thin Films, AIP Conference Proceedings 1989, 020018 (2018); doi: 10.1063/1.5047694
Y. Kumar, A. Sharma, Md. A. Ahmed, Sawanta S. Mali, C. K. Hong and P. M. Shirage, Morphology-controlled synthesis and enhanced energy product (BH)max of CoFe2O4 Nanoparticles, New J. Chem., 2018,42, 15793-15802
L. Sinha, S. Pakhira, P. Bhojane, Sawanta S. Mali, C. K. Hong, P. M. Shirage, Hybridization of Co3O4 and α‑MnO2 Nanostructures for HighPerformance Nonenzymatic Glucose Sensing, ACS Sustainable Chem. Eng., 2018, 6 (10),13248–13261
M. Verma, R. Yadav, L. Sinha, Sawanta S. Mali, C. K. Hong and P. M. Shirage, Pseudocapacitive-battery-like behavior of cobalt manganese nickel sulfide (CoMnNiS) nanosheets grown on Ni-foam by electrodeposition for realizing high capacity, RSC. Adv., 2018, 8, 40198-40209.
Sawanta S. Mali , Hyungjin Kim, Jyoti V. Patil, and Chang Kook Hong, Bio-inspired Carbon Hole Transporting Layer Derived from Aloe Vera Plant for Cost-Effective Fully Printable Mesoscopic Carbon Perovskite Solar Cells, ACS Appl. Mater. Interfaces, 2018, 10 (37), pp 31280–31290 Click here
Yogendra Kumar, Alfa Sharma, Md. A. Ahmed, Sawanta S. Mali, Chang Kook Hong and Parasharam M. Shirage, Morphology-controlled synthesis and enhanced energy product (BH)max of CoFe2O4 nanoparticles, New J. Chem., 2018,42, 15793-15802 Click here
Sawanta S. Mali, Jyoti V. Patil, Hyungjin Kim and Chang Kook Hong, Synthesis of SnO2 nanofibers and nanobelts electron transporting layer for efficient perovskite solar cells, Nanoscale, 2018,10, 8275-8284 Click here
Sawanta S. Mali, Hyungjin Kim, Hyun Hoon Kim, Sang Eun Shim, and Chang Kook Hong, Nanoporous p-type NiOx electrode for p-i-n inverted perovskite solar cell towards air stability, Materials Today (Accepted 6th December 2017) https://www.sciencedirect.com/science/article/pii/S1369702117300160?via%3Dihub
Shivajee S. Jadhav, Sawanta S. Mali, Chang Kook Hong, Pramod S. Patil, Popatrao N. Bhosale, Ganpatrao N. Mulik, Arrested precipitation assembly of nanosheets Cu2ZnCd(S, Se)3 thin film for solar cell performance: Novel skilful synthesis, Materials Letters 217 (2018) 215–2183
Jasmin S. Shaikh, Navajsharif S. Shaikh, Sawanta S. Mali, Jyoti V. Patil, Krishna K. Pawar, Pongsakorn Kanjanaboos, Chang Kook Hong, J. H. Kim and Pramod S. Patil, Nanoarchitectures in dye-sensitized solar cells: metal oxides, oxide perovskites and carbon-based materials, Nanoscale, 2018 DOI: 10.1039/C7NR08350E
N. S. Harale, D. S. Dalavi, Sawanta S. Mali, N. L. Tarwal, S. A. Vanalakar, V. P. Rao, J. H. Kim, C. K. Hong and P. S. Patil Single Step hydrothermally grown nanosheets assembled Tungsten oxide thin films for sensitive and selective NO2 gas detection, Journal of Materials Science (Accepted 6th Dec 2017)
T. S. Bhat, S. S. Mali, A. D. Sheikh, S. D. Korade, K. K. Pawar, C. K. Hong, J. H. Kim, P. S. Patil TiO2/PbS/ZnS heterostructure for panchromatic quantum dot sensitized solar cells synthesized by wet chemical route, Optical Materials 73 (2017) 781-792
Sawanta S. Mali, C. S. Shim, H. J. Kim, C. A. Betty, P. S. Patil, C. K. Hong, Engineered hollow TiO2 nanostructure based perovskite solar cells, Energy Technology, Cover Picture DOI: 10.1002/ente.201700670 Click here
Jasmin S. Shaikh, Navajsharif S. Shaikh, Arif Shaikh, Sawanta S. Mali, Abhijeet J. Kale, P. Kanjanaboosb, Chang Kook Hong, J.H. Kim, Pramod S. Patil Perovskite solar cells: In pursuit of efficiency and stability, Materials & Design, Doi: 10.1016/j.matdes.2017.09.037
Jyoti V. Patil, Sawanta S. Mali, Chang K. Hong, Jin H. Kim, Pramod S. Patil, Structural, morphological and wettability study of electrochemically anodized 1D TiO2 nanotube arrays, Applied Physics A (accepted 14th Aug 2017) 2017, 123, 610 DOI 10.1007/s00339-017-1197-6
Nilam Y. Bhosale, Sawanta S. Mali, Chang K. Hong, Anamika V. Kadam, Hydrothermal synthesis of WO3 nanoflowers on etched ITO and their electrochromic properties, Electrochimica Acta (Accepted 22 June 2017) http://dx.doi.org/10.1016/j.electacta.2017.06.142 246, 2017, 1112-1120
Jyoti V. Patil, Sawanta S. Mali, Archana S. Kamble, Chang K. Hong, Jin H. Kim, Pramod S. Patil, Electrospinning: A versatile technique for making of 1D growth of nanostructured nanofibers and its applications: An experimental approach, Applied Surface Science 423 (2017) 641–674 http://www.sciencedirect.com/science/article/pii/S0169433217317725?via%3Dihub
Sawanta S. Mali, Chang Su Shim, Hyungjin Kim, Chirayath A. Betty, Pramod S. Patil, Chang Kook Hong, Secondary hydrothermally processed engineered TiO2 nanostructures for efficient perovskite solar cells, Energy Technology, DOI: 10.1002/ente.201700030 (accepted 16th May 2017)
Sawanta S. Mali, C. A. Betty, P. S. Patil and Chang Kook Hong, Nanostructured rutile TiO2 electron transporting layer via etching process for efficient perovskite solar cells: Impact of TiO2 structural and crystalline properties, Journal of Materials Chemistry A (Accepted 9th May 2017)
Dipali S. Patil, S. A. Pawar, S. S. Mali, C. K. Hong, J. H. Kim, P. S. Patil, J. C. Shin, Investigations on Nanocomposites of Silver Nanosticks and Polyaniline for Supercapacitor Application, Journal of Nanoscience and Nanotechnology, 2017, 17, 6, 4194-4199(6)
K. V. Khot, T. D. Dongale, Sawanta S. Mali, C. K. Hong, R. K. Kamat, P. N. Bhosale Deposition, characterizations and photoelectrochemical performance of nanocrystalline Cu-In-Cd-S-Se thin films by hybrid chemical process, Journal of Materials Science (acceted 21st April 2017)
Sawanta S. Mali and C. K. Hong Efficient planar n-i-p type heterojunction flexible perovskite solar cells with sputtered TiO2 electron transporting layers, Nanoscale (Accepted 24th Jan 2017) DOI: 10.1039/C6NR09032J
Sawanta S. Mali, Hyungjin Kim, Prof. Do-Heyoung Kim and Prof. Chang Kook Hong, Anti-Solvent Assisted Crystallization Processed Methylammonium Bismuth Iodide Cuboids towards Highly Stable Lead-Free Perovskite Solar Cells, ChemistrySelect (accepted 23rd Jan 2017) , 2017, 2, 1578-1585
Sawanta S. Mali, Hyungjin Kim, Hyun Hoon Kim, Gwang Ryeol Park, Sang Eun Shim, and Chang Kook Hong, Large area, waterproof, air stable and cost effective efficient perovskite solar cells through modified carbon hole extraction layer Materials Today Chemistry (Accepted 28th Dec 2016)
Digambar K. Gaikwad, Sawanta S. Mali, Chang K. Hong, Anamika V. Kadam, Influence of disordered morphology on electrochromic stability of WO3/PPy, Journal of Alloys and Compounds 669 (2016) 240-245
S. M. Pawar, B. S. Pawar, A. I. Inamdar, J. Kim, Y. Jo, Sangeun Cho, S. S. Mali, C. K. Hong, Jungwon Kwak, Hyungsang Kim, Hyunsik Im* In-situ synthesis of Cu(OH)2 and CuO nanowire electrocatalysts for methanol electro-oxidation, Materials Letters, 2017, 187, 60–63 http://dx.doi.org/10.1016/j.matlet.2016.10.079
Sandip K. Jagadale, Kishorkumar V. Khot, Chaitali S. Bagade, Rahul M. Mane, Vishvanath B. Ghanwat, Raghunath K. Mane , Sawanta S. Mali, Chang K. Hong, Popatrao N. Bhosale, Novel synthetic route for the synthesis of ternary Cd(SSe) photoelectrode and their photoelectrochemical application Journal of Materials Science: Materials in Electronics, Accepted 13th Oct. 2016.
Sawanta S. Mali Hyungjin Kim, Sang Eun Shim, and Chang Kook Hong, Solution processed nanostructured p-type NiO electrode for efficient inverted perovskite solar cell Nanoscale (2016) Accepted 4th Oct. 2016.
Sawanta S. Mali, Hyungjin Kim and Chang Kook Hong, formation of lead sulfide nanoflowers comprising regular arrangement of fern leaves grown on transparent conducting oxide http://www.sciencedirect.com/science/article/pii/S1748013216303152
T. S. Bhat, S. S. Mali, S. D. Korade, J. S. Shaikh, M. M. Karanjkar, C. K. Hong, J. H. Kim, P. S. Patil, Mesoporous architecture of TiO2 microspheres via controlled template assisted route and their photoelectrochemical properties, Journal of Materials Science: Materials in Electronics, 2016, August , (2017) 28:304–316
Sawanta S. Mali, Hyungjin Kim and Chang Kook Hong, Formamidinium lead iodide perovskites donuts, August-2016 Volume 11, Issue 3, Pages IFC Nanotoday Cover Page http://www.sciencedirect.com/science/article/pii/S1748013216302213
Sawanta S. Mali, Chang Su Shim, Hyungjin Kim and Chang Kook Hong, Reduced graphene oxide (rGO) grafted zinc stannate (Zn2SnO4) nanofiber scaffolds for highly efficient mixed-halide perovskite solar cells Journal of Materials Chemistry A DOI: 10.1039/c6ta04726
Neha D. Desai, Sawanta S. Mali, Rahul M. Mane, Vishvanath B. Ghanwat, Chang K. Hong, Popatrao N. Bhosale, Influence of deposition temperature on the optical, structural, morphological, compositional and photoelectrochemical properties of TiO2 thin films J. Mater. Sci: Mater Electron DOI 10.1007/s10854-016-5312-9
Sawanta S. Mali and C. K. Hong p-i-n/n-i-p type planar hybrid structure of highly efficient perovskite solar cells towards improved air stability: synthetic strategies and role of p-type hole transport layer (HTL) and n-type electron transport layer (ETL) metal oxides, Nanoscale (Review Article) 2016, DOI: 10.1039/C6NR02276F (Accepted April-2016)
Sachin A. Pawar, Dipali S. Patil, Hyo Rim Jung, Ju Young Park, Sawanta S. Mali, Chang K. Hong, Jae-Cheol Shin, Pramod S. Patil, Jin-Hyeok Kim, Quantum dot sensitized solar cell based on TiO2/CdS/CdSe/ZnS heterostructure, Electrochimica Acta, Accepted 6-4-2016 http://dx.doi.org/doi:10.1016/j.electacta.2016.04.029
Chaitali S. Bagade, Vishvanath B. Ghanwat, Sawanta S. Mali, Kishorkumar V. Khot, Chang K. Hong, Popatrao N. Bhosale, Synthesis of (CdZn)Se thin films by a facile aqueous phase route and their photoelectrochemical performance for solar cell application, J Mater Sci: Mater Electron, 2016 DOI 10.1007/s10854-016-4504-7 .
Shinde D. B., Jagadale S.K., Mane R. K., Mane R. M., Ghanwat V.B., Khot K.V., Mali S. S., Hong C.K. and Bhosale P.N. Time Dependent Facile Hydrothermal Synthesis of TiO2 Nanorods and their Photoelectrochemical Applications, Nanomedicine & Nanotechnology 2015, S7 http://dx.doi.org/10.4172/2157-7439.S7-004
Vishvanath B. Ghanwat, Sawanta S. Mali, Chaitali S. Bagade, Rahul M. Mane, Chang Kook Hong, and P. N. Bhosale, Thermoelectric Properties of Indium(III)-Doped Copper Antimony Selenide Thin Films Deposited Using a Microwave-Assisted Technique, Energy Technology, DOI: 10.1002/ente.201500508 007 B.
Suvarta D. Kharade, Nita B. Pawar, Kishorkumar V. Khot, Pallavi B. Patil, Sawanta S. Mali, Chang K. Hong, Pramod S. Patil and Popatrao N. Bhosale Enhanced photoelectrochemical performance of novel p-type MoBiCuSe4 thin films deposited by a simple surfactant-mediated solution route, RSC Adv., 2016, 6, 24985–24994, DOI 10.1007/s10854-016-4386-8
T. S. Bhat, S. A. Vanalakar, R. S. Devan, S. S. Mali, S. A. Pawar, Y. R. Ma, C. K. Hong, J. H. Kim, P. S. Patil Compact nanoarchitectures of lead selenide via successive ionic layer adsorption and reaction towards optoelectronic devices Mater Sci: Mater Electron (Accepted 20-01-2016) DOI 10.1007/s10854-016-4386-8 , 6, 24985–24
S. Jadhav, S. S. Mali, C. K. Hong, P. S. Patil, P. N. Bhosale, G. N. Mulik, “Novel synthesis of efficient counter electrode by facile arrested precipitation technique (APT)”, Journal of Materials Science: Materials in Electronics, 27, 1-9 (April, 2016). 10.1007/s10854
N. Desai, V. Ghanwat, K. Knot, S. Mali, C. K. Hong, P. N. Bhosale, “Effect of substrate on the nanostructured Bi2Se3 thin films for solar cell applications”, Journal of Materials Science: Materials in Electronics, 27, 2385-2393 (March 1, 2016).
S. S. Mali, C. S. Shim, H. Kim, P. S. Patil, C. K. Hong, “in situ processed gold nanoparticle-embedded TiO2 nanofibers enabling plasmonic perovskite solar cells to exceed 14% conversion efficiency”, Nanoscale, 8, 2664-2677 (February 7, 2016).
S. S. Mali, C. S. Shim, H. Kim, C. K. Hong, “Single step synthesized 1D TiO2 vertically aligned nanorod arrays for CdS sensitized quamtum dot sensitized solar cells”, Ceramic International, 42(1), 1973-1981 (January 1, 2016).
S. S. Mali, C. S. Shim, H. Kim, M. C. Lee, S. Patil, P. S. Patil, C. K. Hong, “Hierarchical SnO2 microspheres prepared by hydrothermal process for efficient improvement of dye-sensitized solar cell properties”, Journal of Nanoparticle Research, 17(12), 496-509 (December 26, 2015).
N. Dsai, S. Mali, V. Kondalkar, R. Mane, C. K. Hong, P. Bhosale, “Chemically grown MoO3 Nanorods for Antibacterial Activity Study”, Journal of Nanomedicine & Nanotechnology, 6, 6 (December 1, 2015)
P. B. Patil, S. Mali, V. Kondalkar, R. Mane, P. S. Patil, C. K. Hong, P. N. Bhosale, “Morphologically controlled electrodeposition of fern shaped Bi2Te3 thin films for photoelectrochemical performance”, Journal of Electroanalytical Chemistry, 758, 178-190 (December 1, 2015).
P. B. Patil, S. S. Mali, V. Kondalkar, R. Mane, P. S. Patil, C. K. Hong, P. N. Bhosale, “Bismuth telluride quantum dot assisted titanium oxide microflowers for efficient photoelectrochemical performance”, Materials Letters, 159, 177-181 (November 15, 2015).
C. S. Shim, S. Mali, R. Aokie, Masski Matsui, K. Manseki, C. K. Hong, “Evaluation of a metal free dye for efficient dye sensitized solar cells based on hydrothermally synthesized TiO2 nanoflowers”, RSC Advances, 5(111), 91708-91715 (October 1, 2015).
A. Kamble, B. Sinha, K. Chung, S. Mali, G. Agawane, S. Vanalakar, I. Kim, C. K. Hong, J. Kim, J. H. Kim, P. S. Patil, “Boosting the performance of ZnO/CdS core-shell nanorod array-based solar cells by ZnS surface Treatment”, Israel Journal of Chemistry, 55, 1-7, (September 1, 2015).
K. V. Khot, S. S. Mali, R. Mane, P. S. Patil, C. K. Hong, J. H. Kim, J. Heo, P. N. Bhosale, “Synthesis, characterization and photoelectrochemical properties of PbS sensitized vertically aligned ZnO nanorods: modified aqueous route”, Journal of Materials Science: Materials in Electronics, 26, 6897-6906 (September 1, 2015).
P. B. Patil, S. S. Mali, V. Kondalkar, K. Khot, R. Mane, C. K. Hong, P. S. Patil, J. H. Kim, P. N. Bhosale, “An approach towards TiO2 dhrysanthemum flowers with tunable properties: influence of reaction time in hydrothermal process”, Journal of Materials Science: Materials in Electronics, 26(8), 6119-6128 (August 24, 2015).
S. S. Mail, C. S. Shim, C. K. Hong, “Highly stable and efficient solid-state solar cells based on methylammonium lead bromide (CH3NH3PbBr3) perovskite quantum dots”, NPG Asia Materials, 7, e208 (August 14, 2015).
C. S. Bagade, S. S. Mali, V. Ghanwat, K. Khot, P. B. Patil, S. Kharade, R. Mane, N. Desa, C. K. Hong, P. S. Patil, P. N. Bhosale, “A facile and low cost strategy to synthesize Cd1-xZnxSe thin films for photoelectrochemical performance: effect of zinc content”, RSC Advances, 5(69), 55658-55668 (July 1, 2015).
C. K. Hong, H. S. Ko, E. M. Han, K. H. Park, “Electrochemical properties of electrodeposited PEDOT counter electrode for dye-sensitized solar cells, International Journal of Electrochemical Science, 10, 5521-5529 (July 1, 2015).
V. B. Ghanwat, S. S. Mali, R. M. Mane, P. S. Patil, C. K. Hong, P. N. Bhosale, “Thermoelectric properties of nanocrystalline Cu3SbSe4 thin films deposited by a self-organized arrested precipitation technique”, New Journal of Chemistry, 39, 5661-5668 (July 1, 2015).
S. S. Mali, C. S. Shim, C. K. Hong, “Highly porous Zinc Stannate (Zn2SnO4) nanofibers scaffold photoelectrodes for efficient methyl ammonium halide perovskite solar cells”, Scientific Reports, 5, 11424 (June 22, 2015).
S. S. Mali, C. S. Shim, H. Kim, J. V. Patil, D. H. Ahn, P. S. Patil, C. K. Hong, “Evaluation of various diameters of titanium oxide nanofibers for efficient dye sensitized solar cells synthesized by electrospinning technique: A systematic study and their application”, Electrochimica Acta, 166, 356-366 (June 1, 2015).
K. V. Knot, S. S. Mali, N. B. Pawar, R. R. Kharade, R. Mane, P. B. Patil, P. S. Patil, C. K. Hong, J. H. Kim, J. Heo, P. N. Bhosale, “Simplistic construction of cadmium sulfoselenide thin films via a hybrid chemical process for enhanced photoelectrochemical performance”, RSC Advances, 5, 40283-40296 (May 6, 2015)
S. S. Mohite, S. S. Mali, R. Kharade, C. K. Hong, D. Kanase, P. S. Patil, P. N. Bhosale, “Single source precursor for vacuum evaporation of MoBi2Se5 Photoactive thin films”, Journal of Materials Science: Materials in Electronics, 26, 2879-2886 (May 1, 2015).
V. V. Kondalkar, S. S. Mail, R. Kharade, R. Mane, P. S. Patil, C. K. Hong, J. H. Kim, S. Choudhury, P. N. Bhosale, “Langmuir-Blodgett self organized nanocrystalline tungsten oxide thin films for electrochromic performance”, RSC Advances, 5, 26923-26931 (April 1, 2015).
S. S. Mali, C. S. Shim, P. S. Patil, C. K. Hong, “Once again, organometallic tri-halide perovskites: efficient light harvester for solid state perovskite solar cells”, Materials Today, 18(3), 172-173 (April, 2015).
S. V. Jadhav, D. S. Nikam, V. M. Khot, S. S. Mali, C. K. Hong, S. H. Pawar, “PVA and PEG functionalized LSMO nanoparticles for magnetic fluid hyperthermia application”, Materials Characterization, 102, 209-220 (April, 2015).
R. A. Bohara, H. Yadav, N. Throat, S. Mali, C. K. Hong, S. Nanaware, S. Pawar, “Synthesis of functionalized Co0.5Zn0.5Fe2O4 nanoparticles for biomedical applications”, J. of Magnetism and Magnetic Materials, 378, 397-401 (March 15, 2015).
V. V. Kondalkar, S. S. Mali, R. R. Kharade, K. V. Knot, P. B. Patil, R. M. Mane, S. Choudhuty, P. S. Patil, C. K. Hong, J. H. Kim, P. N. Bhosale, “High performing smart electrochromic device based on honeycomb nanostructured h-WO3 thin films: hydrothermal assisted synthesis”, Dalton Transactions, 44(6), 2788-2800 (February 14, 2015).
S. S. Mali, C. S. Shim, H. K. Park, J. Heo, P. S. Patil, C. K. Hong, “Ultrathin atomic layer deposited TiO2 for surface passivation of hydrothermally grown 1D TiO2 nanorod arrays for efficient solid-state perovskite solar cells”, Chemistry of Materials, 27, 1541-1551 (February 9, 2015).
D. S. Nikam, S. V. Jadhav, V. M. Khot, R. A. Bohara, C. K. Hong, S. S. Mali, S. H. Pawar, “Cation distribution, structural, morphological and magnetic properties of Co1-xZnxFe2O4 (x=0-1) nanoparticles”, RSC Advances, 5(3), 2338-2345 (January, 2015).
K. V. Khot, S. Mali, N, Pawar, R. Kharade, R. Mane, V. Kondalkar, P. B. Patil, P. S. Patil, C. K. Hong, J. H. Kim, J. Heo and P. Bhosale, “Development of nanocoral-like Cd(SSe) thin films using an arrested precipitation technique and their application”, New Journal of Chemistry, 38 (12), 5964-5974 (December, 2014).
K. Khot, S. Mali, R. Kharade, R. Mane, P. Patil, C. K. Hong, J. H. Kim, J. Heo, P. N. Bhosale, “Novel-approach for fabrication of CdS thin films for photoelectrochemical solar cell application”, Journal of Materials Science: Materials in Electronics, 25 (12), 5606-5617 (December, 2014).
S. S. Mali, C. S. Shim, C. K. Hong, “Successive ionic layer adsorption and reaction deposited kesterite Cu2ZnSnS4 nanoflakes counter electrodes for efficient dye-sensitized solar cells”, Materials Research Bulletin, 59, 249-253 (November, 2014).
V. Kondalkar, S. Mali, R. Mane, P. Dandge, S. Choudhury, C. K. Hong, P. S. Patil, S. R. Patil, J. H. Kim, P. N. Bhosale, “Photoelectrocatalysis of cefotaxime using nanostructured TiO2 photoanode: Identification of the degradation products and determination of the toxicity level, Industrial & Engineering Chemistry Research, 53(47), 18152-18162 (November 26, 2014).
A. More, R. Patil, D. Dalavi, S. S. Mali, C. K. Hong, M. Gang, J. H. Kim, P. S. Patil, “Electrodeposition of nano-granular tungsten oxide thin films for smart window application”, Materials Letters, 134, 298-301 (November 1, 2014).
V. V. Kondalkar, S. S. Mali, N. B. Pawar, R. M. Mane, S. Choudhury, C. K. Hong, P. S. Patil, S. R. Patil, P. N. Bhosale, J. H. Kim, “Microwave-assisted rapid synthesis of highly porous TiO2 thin films with nanocrystalline framework for efficient photoelectrochemical conversion”, Electrochimica Acta, 143(1), 89-97 (October, 2014).
V. B. Chanwat, S. S. Mali, S. Kharade, N. Pawar, S. Patil, R. Mane, P. Patil, C. K. Hong, P. N. Bhosale, “Microwave assisted synthesis, characterization and thermoelectric properties of nanocrystalline copper antimony selenide thin films”, RSC Advances, 4 (93), 51632-51639 (October, 2014).
T. S. Bhat, R. S. Devan, S. S. Mali, A. S. Kamble, S. A. Pawar, I. Y. Kim, Y. R. Ma, C. K. Hong, J. H. Kim, P. S. Patil, “Photoelectrochemically active surfactant free single step hydrothermal mediated titanium dioxide nanorods”, Journal of Materials Science: Materials in Electronics, 25 (10), 4501-4511 (October, 2014).
N. B. Pawar, S. Kharade, S. S. Mali, R. Mane, C. K. Hong, P. S. Patil, P. N. Bhosale, “Effect of indium (III) content on photoelectrochemical performance of MoBi(2-x)InxS5 thin films”, Solid State Sciences, 35, 10-17 (September, 2014).
K. Khot, S. Mali, N. Pawar, R. Mane, V. Kondalkar, V. Ghanwat, P. Patil, C. K. Hong, J. H. Kim, J. Heo, P. N. Bhosale, “Novel synthesis of interconnected nanocubic PbS thin films by facile aqueous chemical route”, Journal of Materials Science: Materials in Electronics, 25 (9), 3762-3770 (September, 2014).
P. B. Patil, S. S. Mail, V. V. Kondalkar, N. B. Pawar, K. V. Khot, C. K. Hong, P. S. Patil, P. N. Bhosale, “Single step hydrothermal synthesis of hierarchical TiO2 microflowers with radially assembled nanorods for enhanced photovoltaic performance”, RSC Advances, 4(88), 47278-47286 (September, 2014)
E. Jo, J. Yeo, D. Kim, J. Oh, C. K. Hong, “Preparation of well-controlled porous carbon nanofiber materials by varying the compatibility of polymer blends”, Polymer International, 63(8), 1471-1477 (August, 2014).
S. V. Jadhav, D. S. Nikam, S. S. Mali, C. K. Hong, S. H. Pawar, “The influence of coating on the structural, magnetic and colloidal properties of LSMO manganite and the heating mechanism for magnetic fluid hyperthermia application”, New Journal of Chemistry, 38(8), 3678-3687 (August 1, 2014).
V. V. Shinde, D. S. Dalavi, S. S. Mali, C. K. Hong, J. H. Kim, P. S. Patil, “Surfactant free microwave assisted synthesis of ZnO microspheres: Study of their antibacterial activity”, Applied Surface Science, 307, 495-502 (July 15, 2014).
S. S. Mali, P. S. Patil, P. N. Bhosale, C. K. Hong, “Novel hybrid solar cell based on a-copper phthalocyanine-cadmium sulfide planar heterojunction”, Journal of Materials Science, 49(14), 5100-5111 (July, 2014).
S. S. Mali, C. A. Betty, P. N. Bhosale, P. S. Patil, C. K. Hong, “From nanocorals to nanorods to nanoflowers nanoarchitecture for efficient dye-sensitized solar cells at relatively low film thickness: All Hydorthermal Process”, Scientific Reports, 4, 5451 (June 30, 2014).
D. S. Patil, S. Pawar, R. Devan, S. S. Mali, M. Gang, Y. Ma, C. K. Hong, J. H. Kim, P. S. Patil, “Polyaniline based electrodes for electrochemical supercapacitor: Synergitic effect of silver, activated carbon and polyaniline”, Journal of Electroanalytical Chemistry, 724, 21-28 (June 15, 2014).
K. H. Park, R. R. Pandey, C. K. Hong, K. K. Saini, M. Dhayal, “Electrochemical characterization of enzymatic organo-metallic coating of TiO2 nanoparticles”, Sensors and Actuators B: Chemical, 196, 589-595 (June, 2014).
S. S. Mali, J. V. Patil, P. Kadam, H. Deshamukh, C. S. Shim, P. S. Patil, C. K. Hong, “Hydrothermal synthesis of rutile TiO2 bottle brush for efficient dye-sensitized solar cell”, Journal of Nanoparticle Research, 16(6), 2406 (May, 2014).
H. M. Yadav, S. V. Otari, V. B. Koli, S. S. Mali, C. K. Hong, S. H. Pawar, S. D. Delekar, “Preparation and characterization of copper-doped anatase TiO2 nanoparticles with visible light photocatalytic antibacterial activity”, Journal of Photochemistry and Photobiology A: Chemistry, 280, 32-38 (April 15, 2014).
N. B. Pawar, S. S. Mali, S. D. Kharade, M. G. Gang, P. S. Patil, J. H. Kim, C. K. Hong, P. N. Bhosale, “Influence of vacuum annealing on the structural and photoelectrochemical properties of nanocrystalline MoBi2S5 thin films”, Current Applied Physics, 14(3), 508-515 (March 1, 2014)
D. S. Nikam, S. V. Jadhav, V. M. Knot, R. S. Ningthoujam, C. K. Hong, S. S. Mali, S. H. Pawar, “Colloidal stability of polyethylene glycol funtionalized Co0.5Zn0.5Fe2O4 nanoparticles: effect of pH, sample and salt concentration for hyperthermia application”, RSC Advances, 4(25), 12662-12671 (March, 2014).
C. K. Hong, Y. H. Jung, H. J. Kim, K. H. Park, “Electrochemical properties of TiO2 nanoparticles/nanorod composite photoanode for dy-sensitized solar cells”, Current Applied Physics, 14(3), 294-299 (March, 2014).
S. S. Mali, P. S. Patil, C. K. Hong, “Low-cost electrospun highly crystalline kesterite Cu2ZnSns4 nanofiber counter electrodes for efficient dye-sensitized solar cells”, ACS Applied Materials & Interfaces, 6(3), 1688-1696 (February 12, 2014).
S. A. Pawar, R. S. Devan, D. S. Patil, V. V. Burungale, T. S. Bhat, S. S. Mali, S. W. Shin, J. E. Ae, C. K. Hong, Y. R. Ma, J. H. Kim, P. S. Patil, “Hydrothermal growth of photoelectrochemically active titanium dioxide cauliflower-like nanostructures”, Electrochimica Acta, 117, 470-479 (January 20, 2014).
S. S. Mali, H. Kim, J. H. Kim, P. S. Patil, C. K. Hong, “Synthesis and characterization of planar heteojunction hybrid polymer solar cells based on copper pthalocyanine (CuPc) and titanium dioxide”, Ceramics International, 40(1), 643-649 (January, 2014).
S. S. Mali, H. Kim, P. S. Patil, C. K. Hong, “Chemically grown vertically aligned 1D ZnO nanorods with CdS coating for efficient quantum dot sensitized solar cells (QDSSC): a control synthesis route”, Dalton Transactions, 42(48), 16961-16967 (December 28, 2013).
S. S. Mali, H. Kim, C. S. Shim, P. S. Patil, C. K. Hong, “Polyvinylpyrrolidone (PVP) assisted single-step synthesis of kesterite Cu2ZnSn S4 nanoparticles by solvothermal process”, Physica Status Solidi – Rapid Research Letters, 7(12), 1050-1054 (December, 2013).
M. Matsui, M. Ono, Y. Kubota, K. Funabiki, T. Yoshida, H. J. Kim, C. K. Hong, S. Higashijima, H. Miura, “Survey of co-adsorbent for DN350 in zinc oxide dye-sensitized solar cell”, Dyes and Pigments, 99(3), 829-832 (December, 2013).
K. Park, T. Kim, J. Kim, H. J. Kim, C. K. Hong, J. Lee, “Adsorption and electrochemical properties of photoelectrodes depending on TiO2 film thickness for dye-sensitized solar cells”, Journal of Electroanalytical Chemistry, 708, 39-45 (November 1, 2013).
S. S. Mali, H. Kim, C. S. Shim, P. S. Patil, J. H. Kim, C. K. Hong, “Surfactant free most probable TiO2 nanostructures via hydrothermal and its dye sensitized solar cell properties”, Scientific Reports, 3, 3004 (October 21, 2013).
S. D. Kharade, N. B. Pawar, S. S. Mali, C. K. Hong, P. S. Patil, M. G. Gang, J. Kim, P. N. Bhosale, “Effect of copper content on optostructural, morphological and photoelectrochemical properties of MoBi2-xCuxSe4 thin films”, Journal of Materials Science, 48(20), 7300-7311 (October, 2013).
S. S. Mali, H. Kim, W. Y. Jang, H. S. Park, P. S. Patil, C. K. Hong, “Novel synthesis and characterization of mesoporous ZnO nanofibers by electrospinning technique”, ACS Sustainable Chemistry & Engineering, 1(9), 1207-1213 (September 3, 2013).
S. D. Kharade, N. B. Pawar, V. B. Ghanwat, S. S. Mali, W. R. Bae, P. S. Patil, C. K. Hong, J. Kim and P. N. Bhosale, “Room temperature deposition of nanostructured Bi2Se3 thin films for photoelectrochemical application effect of chelating agents”, New Journal of Chemistry, 37(9), 2821-2828 (September 1, 2013).
S. S. Mali, H. Kim, C. S. Shim, W. R. Bae, N. L. Tarwal, S. B. Sadale, P. S. Patil, J. Kim and C. K. Hong, “Single-step synthesis of 3D nanostructured TiO2 as a scattering layer for vertically aligned 1D nanorod photoanodes ans their dye-sensitized solar cell properties”, CrystEngComm, 15(28), 5660-5667 (July 28, 2013).
C. K. Hong, H. Ko, E. Han, J. Yun, K. Park, “Enhanced efficiency of dye-sensitized solar cells doped with green phosphors LaPO4:Ce, Tb or (Mg, Zn)Al11O19:Eu”, Nanoscale Research Letters, 8(1), 1-6 (May 8, 2013).
S. M. Park, Y. W. Lim, C. H. Kim, D. J. Kim, W. Moon, J. Kim, J. Lee, C. K. Hong, G. Seo, “Effect of carbon nanotubes with different lengths on mechanical and electrical properties of silica-filled styrene butadiene rubber compounds”, J. Industrial and Engineering Chemistry, 19, 712-719 (March 25, 2013).
E. Shin, H. Seo, J. Kim, P. Ahn, S. Park, Y. W. Lim, S. J. Kim, C. H. Kim, D. J. Kim, C. K. Hong, G. Seo, J. Lee, “A new diagnostic tool for the percolating carbon network in the polymer matrix”, Polymer, 54 (3), 999-1003 (February 15, 2013).
S. Mali, R. Devan, Y. Ma, C. Betty, P. Bhosale, R. Panmand, B. Kale, S. Jadkar, P. Patil, J. Kim, C. K. Hong, “Effective light harvesting in CdS nanoparticle-sensitized rutile TiO2 microspheres”, Electrochimica Acta, 90, 666-672 (February, 2013).
Y. Jung, K. Park, J. Oh, D. Kim, C. K. Hong, “Effect of TiO2 rutile nanorods on the photoelectrodes of dye-sensitized solar cells”, Nanoscale Research Letters, 8(37), 1-6 (January 19, 2013).
E. Senoz, R. P. Wool, C. MaChalicher, C. K. Hong, “Physical and chemical changes in feather keratin during pyrolysis”, Polymer Degradation and Stability, 97 (3), 297-307 (March, 2012).
C. Nah, J. Lim, B. Cho, C. K. Hong, A. N. Gent, “Reinforcing Rubber with Carbon Nanotubes”, Journal of Applied Polymer Science, 118 (3), 1574-1581 (November 05, 2010).
J. Hong, J. Lee, C. K. Hong, S. E. Shim, “Improvement of Thermal Conductivity of Poly(Dimethyl Siloxane) Using Silica-coated Multi-walled Carbon Nanotube”, Journal of Thermal Analysis and Calorimetry, 101 (1), 297-302 (July, 2010).
H. Yoon, J. Lee, D. W. Park, C. K. Hong, S. E. Shim, “Preparation and electrorheological characteristic of CdS/Polystyrene composite particles”, Colloid and Polymer Science, 288 (6), 613-619 (April, 2010).
G. Seo, S. M. Park, K. Ha, K. T. Choi, C. K. Hong, S. Kaang, “Effectively reinforcing roles of the networked silica prepared using 3,3’-vis(triethoxysilylpropyl)tetrasulfide in the physical properties of SBR compounds”, Journal of Materials Science, 45 (7), 1897-1903 (April, 2010).
D. R. Hwang, J. Hong, C. K. Hong, S. E. Shim, “Synthesis of Positively Charged Silica-Coated Polystyrene Microspheres via Dispersion Polymerization Initiated with Amphoteric Initiator”, J. Dispersion Sci & Technol., 31 (2), 155-161 (February, 2010).
E. M. Jin, K. Park, J. Yun, C. K. Hong, M. Hwang, B. Park, K. Kim, H. Gu, “Photovoltaic Properties of TiO2 Photoelectrode Prepared by Using Liquid PEG-EEM Binder”, Surface Review and Letters, 17(1), 15-20, (February, 2010)
J. Hong, J. Lee, C. K. Hong, S. E. Shim, “Effect of Dispersion State of Carbon Nanotube on the Thermal Conductivity of Poly(dimethylsiloxane) Composites”, Current Applied Physics, 10 (1), 359-363 (January, 2010).
K. Park, E. M. Jin, H. B. Gu, S. E. Shim, C. K. Hong, “Effects of HNO3 treatment of TiO2 nanoparticles on the photovoltaic properties of dye-sensitized solar cells”, Materials Letters, 63, 2208-2211 (2009).
C. K. Hong, H. Jin, S. Park and S. Kaang, “Variation of Thermal Stress and Dimension of Rubber Solids upon Heating”, J. Industrial and Engineering Chemistry, 15, 483-487 (2009).
D. S. Jeong, C. K. Hong, G. T. Lim, G. Seo, C. S. Ryu, “Networked Silica with Exceptional Reinforcing Performance for SBR Compounds: Interconnected by Methylene Diphenyl Discyanate”, J. Elastomers and Plastics, 41, 353-368 (2009).
C. K. Hong, H. Maeng, K. Song and S. Kaang, “Thermal Behaviors of Heat Shrinkable Poly (vinyl chloride) Film”, Journal of Applied Polymer Science, 112(2), 886-895 (2009).
H. Han, C. K. Hong, J. Hong, D. W. Park, S. E. Shim, “Synthesis of Poly(Styrene-co-4-Vinylpyridine) Microspheres via Dispersion Polymerization: Effect of the Concentration of 4-Vinylpyridine”, Journal of Applied Polymer Science, 111, 2900-2907 (2009).
C. K. Hong, H. S. Jang, S. H. Hong, S. E. Shim, “Rate-acceleration of TEMPO-mediated Polymerization of Styrene in the Presence of Various Acids”, Macromolecular Research, 17(1), 14-18 (2009).
M. Kim, J. Hong, C. K. Hong, S. E. Shim, “Preparation of silica-layered multi-walled carbon nanotubes activated by grafting of poly(4-vinylpyridine)”, Synthetic Metals, 159, 62-68 (2009).
C. K. Hong, M. Hwang, D. Ryu, H. Moon, “Preparation of Copolymer Nanospheres by Soap-free Emulsion Polymerization Using an Amphiphilic Macromonomer”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 331, 250-256 (2008).
S. Hong, M. Kim, C. K. Hong, D. Jung, S. E. Shim, “Encapsulation of multi-walled carbon nanotubes by poly(4-vinylpyridine) and its dispersion stability in various solvent media”, Synthetic Metals, 158, 900-907 (2008).
C. K. Hong, K. S. Yang, S. H. Oh, J. H. Ahn, B. H. Cho, C. Nah, “Effect of blend composition on the morphology development of electrospun fibers based on PAN/PMMA Blends”, Polymer International, 57(12), 1357-1362 (2008).
C. K. Hong, J. Lee, Y. B. Jang, T. H. Kim, J. Yeo and Y. Ahn, S. J. Cho, “Adsorption of Water on Mesoporous Silica for Heat Management: Effect of Pore Structure”, J. Nanoscience and Nanotechnology, 8, 5471-5474 (2008).
G. Seo, S. Kaang, C. K. Hong, D. Jeong, C. S. Yoo, D. H. Lee, “Preparation of Novel Fillers, Named Networked Silicas, and Their Effects of Reinforcement on Rubber Compounds”, Polymer International, 57, 1101-1109 (2008).
C. K. Hong, N. Kim, S. L. Kang, C. Nah, Y. S. Lee, B. H. Cho and J. H. Ahn, “Mechanical properties of maleic anhydride treated jute fibre/polypropylene composites”, Plastics, Rubber and Composites, 37(7), 325-330 (2008).
K. H. Park, C. K. Hong, “Morphology and photoelectrochemical properties of TiO2 electrodes prepared using functionalized plant oil binders”, Electrochemistry Communications, 10, 1187-1190, (2008).
M. Kim, J. Hong, J. Lee, C. K. Hong, S. E. Shim, “Fabrication of Silica Nanotubes Using Silica Coated Multi-walled Carbon Nanotubes as the Template”, J. Colloid and Interface Science, 322, 321-326 (2008).
C. K. Hong, J. Y. Jung, D. L. Cho, S. Kaang, “Effects of Fillers on Fatigue Crack Growth Rate of Ethylene Propylene Diene Monomer”, Polymer (Korea), 32(3), 270-275 (2008).
J. Hong, H. Han, C. K. Hong, S. E. Shim, “A Direct Preparation of Silica Shell on Polystyrene Microspheres Prepared by Dispersion Polymerization with Polyvinylpyrrolidone”, J. Polym. Sci. Part A: Polym. Chem., 46, 2884-2890 (2008).
C. K. Hong, S. Park and S. Kaang, “A Test Method for Measuring the Dimensional Stability of Elastomeric Materials upon Heating”, Polymer Testing, 27, 146-152 (2008).
C. K. Hong, M.-J. Kim, S. H. Oh, Y.-S. Lee and C. Nah, “Effects of PP-g-(Maleic Anhydride/Styrene) Compatibilizer on Mechanical and Rheological Properties of Polypropylene/Clay Nanocomposites”, J. Industrial and Engineering Chemistry, 14, 236-242 (2008).
C. K. Hong, I. Hwang, N. Kim, D. H. Park, B. S. Hwang and C. Nah, “The Mechanical Properties of Silanized Jute-PP Composites”, J. Industrial and Engineering Chemistry, 14, 71-76 (2008).
J. Lee, M. Kim, C. K. Hong, S. E. Shim, “Measurement of the Dispersion Stability of Pristine and Surface-Modified Multiwalled Carbon Nanotubes in Various Nonpolar and Polar Solvents”, Measurement Science and Technology, 18 (12), 3707-3712 (2007).
M. Kim, C. K. Hong, S. Choe and S. E. Shim, “Synthesis of Polystyrene Brush on Multi-Walled Carbon Nanotubes Treated with KMnO4 in the Presence of a Phase Transfer Catalyst”, J. Polymer Science Part A: Polymer Chemistry, 45 (19), 4413-4420 (2007).
C. K. Hong, H. Kim, C. Ryu, C. Nah, Y. Huh and S. Kaang, “Effects of Particle Size and Structure of Carbon Black on the Abrasion of Filled Elastomer Compounds”, J. Materials Science, 42 (20), 8391-8399 (2007).
C. Nah, M. Huh, D. Choi, J. Kook, I. Hwang, K. Jeong and C. K. Hong, “Rheological and Failure Properties of Polycarbonate/Poly(butylenes terephthalate) Blends” Polymer (Korea), 31 (5), 399-403 (2007).
J. Hong, C. K. Hong, S. Choe and S. E. Shim, “Preparation of Poly(acrylamide)/MWNTs Nanocomposite Using Carboxylated MWNTs”, J. Polymer Science Part A: Polymer Chemistry, 45 (15), 3477-3481 (2007).
J. Hong, C. K. Hong and S. E. Shim, “Synthesis of Polystyrene Microspheres by Dispersion Polymerization using Poly(vinyl alcohol) as a Steric Stabilizer in Aqueous Alcohol Media”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 302 (1-3), 225-233 (2007).
J. L. Massey, J. C. Parr, T. A. Wagler, E. von Meerwall, C. K. Hong and A. I. Isayev, “Ultrasound Devulcanization of Unfilled Natural Rubber Networks, Studied via Component Molecular Mobility”, Polymer International, 56(7), 860-869 (2007).
J. Lee, C. K. Hong, S. Choe and S. E. Shim, “Synthesis of Polystyrene/Silica Composite Particles by Soap-free Emulsion Polymerization using Positively Charged Colloidal Silica”, J. Colloid and Interface Science, 310 (1), 112-120 (2007).
C. K. Hong and R. P. Wool, “Development of Bio-Based Composite Material from Soybean Oil and Keratin Fibers”, Journal of Applied Polymer Science, 95(6), 1524-1538 (2005).
J. Lu, C. K. Hong, and R. P. Wool, “Bio-Based Nanocomposites from Functionalized Plant Oils and Layered Silicate”, Journal of Polymer Science Part B: Polymer Physics, 42(8), 1441-1450 (2004).
V. Yashin, C. K. Hong and A. I. Isayev, “Thermomechanical degradation of SBR during Ultrasonic Treatment under the Static Conditions”, Rubber Chemistry & Technology, 77(1), 50-77 (2004).
A. I. Isayev and C. K. Hong, “Novel Ultrasonic Process for In-situ Copolymer Formation and Compatibilization of Immiscible Polymers”, Polymer Engineering and Science, 43(1), 91-101 (2003).
A. I. Isayev, C. K. Hong and K. J. Kim, “Continuous Mixing and Compounding of Polymer/filler and Polymer/polymer Mixtures with the Aid of Ultrasound”, Rubber Chemistry & Technology, 76(4), 923-947 (2003).
C. K. Hong and A. I. Isayev, “Continuous Ultrasonic Devulcanization of NR/SBR Blends”, J. Applied Polymer Science, 83 (1), 160-168 (2002).
C. K. Hong and A. I. Isayev, “Blends of Ultrasonically Devulcanized and Virgin Carbon Black Filled NR”, J. Materials Science, 37 (2), 385-388 (2002).
C. K. Hong and A. I. Isayev, “Ultrasonic Devulcanization of Unfilled SBR under Static and Continuous Conditions”, Rubber Chemistry & Technology, 75 (1), 133-142 (2002).
C. K. Hong and A. I. Isayev, “Continuous Ultrasonic Devulcanization of Carbon Black Filled NR Vulcanizates”, J. Applied Polymer Science, 79 (13), 2340-2348 (2001).
C. K. Hong and A. I. Isayev, “Plastic/Rubber Blends of Ultrasonically Devulcanized GRT with HDPE”, J. Elastomers and Plastics, 33 (1), 47-71 (2001).
학진등재(예정)논문
1. C. K. Hong and A. I. Isayev, “An Application of High-Power Ultrasound to Rubber Recycling”, Elastomer, 38 (2), 103-121 (2003).
2. K. T. Nam, C. K. Hong, K. H. Chae, S. Kaang, “A study on UV degradation of SBR and NR Containing Polymeric UV Stabilizer”, Elastomer, 41(3), 182-193 (2006).
3. C. Ryu, C. K. Hong, C. W. Moon, S. Kaang, “Effects of Particle Size and Structure of Fillers on the Friction and Wear Behavior of Filled Elastomer”, Elastomer, 41(3), 194-204 (2006).
4. H. Jin, C. K. Hong, D. L. Cho, S. Kaang, “Effect of Temperature on Hardness and Stiffness of NR and SBR Vulcanizates”, Elastomer, 42, 143-150 (2007).
5. S. Park, C. K. Hong, D. L. Cho, S. Kaang, “Measurement of Thermal Shrinkage/Expansion Force of Filled Rubber”, Elastomer, 42, 201-208 (2007).
6. H. Jin, C. K. Hong, D. L. Cho, S. Kaang, “Effect of Temperature on Hardness of Rubber Materials with Different Curing System”, Elastomer, 43, 213-220 (2008).
7. H. Jin, C. K. Hong, D. L. Cho, S. Kaang, “Effects of Temperature and Curing Systems on Compression Set of NR compounds at Constant Load”, Elastomers and Composites, 44, 41-46 (2009).
Book
1. C. K. Hong, Jue Lu and R. P. Wool, “Bio-Based Nanocomposites from Functionalized Plant Oils” in “Polymer Nanocomposites Handbook”, Ed. by R. K. Gupta, E. Kennel and K. Kim, Chap. 18, CRC press, NY, 2009.
기타논문
1. S. Kaang, C. Hong, D. Kweon, “Diffusion of Solvents in Natural Rubber Networks”, Polymer (Korea), 18(4), 492-501 (1994).
2. C. K. Hong and R. P. Wool, “Low Dielectric Constant Material from Hollow Fibers and Plant Oil”, Journal of Natural Fibers, 1(2), 83-92 (2004).
3. C. K. Hong, “An Application of Powerful Ultrasound to Rubber Processing: in-situ Compatibilization of rubber blends”, 고무기술, 7(1), 8-16 (2006).
Patents
국제등록
1. A. I. Isayev and C. K. Hong, “Ultrasound Assisted Continuous Process for Making Novel Polymer Blends and Copolymer”, US Patent 6,528,554 (2003. 03. 04).
2. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, US 7,585,608 (2009. 09. 08).
3. J. Lee, K. Yon, C. K. Hong, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, US 7,749,675 (2010. 07. 06).
4. C. K. Hong, K. Yon, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, US 7,759,041 (2010. 07. 20).
5. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, US 7,842,449 (2010. 11. 30).
6. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Core-shell Toner and Toner Prepared Using the Method”, US 7,892,716 (2011. 02. 22).
7.
국내등록
1. 정민영, 연경열, 홍창국, 이준영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0644711, (2006. 11. 03). 소멸
2. 홍창국, 연경열, 이준영, 정민영, “토너 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0657345, (2006. 12. 07).
3. 홍창국, 연경열, 이준영, 정민영, “토너의 제조방법 및 이를 이용하여 제조된 토너(S)”, 한국, 등록번호 10-0708169, (2007. 04. 10).
4. 이준영, 연경열, 홍창국, 김상우, “코어/쉘 구조를 갖는 고분자 라텍스 입자의 제조 방법”, 한국, 등록번호 10-0715851 (2007. 05. 01).
5. 이준영, 연경열, 홍창국, 정민영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0717025 (2007. 05. 04).
6. 정민영, 연경열, 홍창국, 이준영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0727984 (2007. 06. 07).
7. 홍창국, 연경열, 이준영, 정민영, “개질된 플랜트 오일을 이용한 토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0727983 (2007. 06. 07).
8. 홍창국, 연경열, 이준영, 정민영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0728013 (2007. 06. 07).
9. 정민영, 연경열, 홍창국, 이준영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0728015 (2007. 06. 07).
10. 정민영, 연경열, 홍창국, 이준영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0728018 (2007. 06. 07).
11. 정민영, 연경열, 홍창국, 이준영, “토너 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0728023 (2007. 06. 07).
12. 이준영, 연경열, 홍창국, 정민영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0728030 (2007. 06. 07).
13. 홍창국, 연경열, 정민영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0728027 (2007. 06. 07).
14. 정민영, 임상순, 연경열, 홍창국, 신요다, 박수범, 김현주, 박성환, “토너 제조방법 및 이를 이용하여 제조된 토너”, 한국, 등록번호 10-0782849 (2007. 11. 30). 소멸
15. 박경희, 홍창국, 구할본, 조동련, 김태영, “천연 식물성 오일과 지방산의 화학적 개질을 통한 바인더를 사용한 염료감응형 태양전지 및 그 제조방법”, 한국 등록번호 10-0835364 (2008. 05. 29).
16. 박경희, 홍창국, 구할본, 김은미, 문희, “하이드록시기와 카르복실기를 포함하는 공중합체 바인더를 사용한 염료감응형 태양전지 및 그 제조방법”, 한국, 등록번호 10-0861117 (2008. 09. 24).
17. 안영수, 여정구, 조철희, 김시경, 홍창국, 조성준, “허니콤구조체용 박판 제조장치 및 그 제조방법”, 한국, 등록번호 10-0911023 (2009. 07. 30).
18. 안영수, 여정구, 조철희, 김시경, 홍창국, 조성준, 이동채, 김호년, “전열교환기용 하니컴구조체 제조방법 및 그 제조장치”, 한국, 등록번호 10-0911024 (2009. 07. 30).
19. 여정구, 안영수, 조철희, 김시경, 홍창국, 조성준 “전열교환기용 허니컴 구조체 제조 방법 및 이에 의해 제조된 허니컴 구조체”, 한국, 등록번호 10-0975431 (2010. 08. 05).
20. 조성용, 박기민, 이승재, 김태영, 홍창국, 민병준, “기능기가 증가된 광촉매 및 그 제조방법, 상기 광촉매를 포함하는 염료감응형 태양전지의 반도체 전극용 페이스트 조성물과 그 제조방법, 및 이를 이용한 염료감응형 태양전지 및 그 제조방법”, 한국, 등록번호 10-1097752 (2011. 12. 16).
21. 이주형, 신민철, 최석진, 홍창국, 배송이, “아크릴로니트릴 부타디엔 스티렌 소재의 내충격 물성 예측 방법”, 한국, 등록번호 10-1144112 (2012. 5. 2).
22. 여정구, 이은주, 조철희, 박현설, 정남조, 홍창국, 김동국, “탄소 에어로겔 시트의 제조방법”, 한국, 등록번호 10-1147156 (2012. 5. 10).
23. 홍창국, 조은미, “기공이 제어된 다공성 탄소나노시트의 제조방법 및 이에 의하여 제조된 다공성 탄소나노시트”, 한국, 등록번호 10-1439896 (2014. 9. 3).
24. 홍창국, 장운영, “탄소 에어로겔-고분자 복합체 시트의 제조 방법 및 이에 의하여 제조된 탄소 에어로겔-고분자 복합체 시트”, 한국 (등록결정)
25.
국제출원
1. R. P. Wool and C. K. Hong, “Low Dielectric Constant Materials from Plant Oils and Feathers”, US Patent Application Pub. US 2004 0072976 (2004. 04. 15).
국내출원
1. 정재혁, 이정원, 연경열, 홍창국, 정민영, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 출원번호 10-2006-0125693 (2006. 12. 11). 공개
2. 이주형, 신민철, 최석진, 홍창국, 배송이 “ABS 수지의 고무함량 및 그래프트율 정량분석 방법”, 한국, 출원번호 10-2010-0048664 (2010. 05. 25)
3. 안영수, 여정구, 주국택, 조철희, 홍창국, 오상연, 김세희, 오형선, 유재식, 신승현, “건물공조용 또는 제습용 고분자 복합소재 및 그 제조방법”, 한국, 출원번호 10-2010-0128677 (2010. 12. 15).
4. 오정석, 정순준, 홍창국, 심창수, “라텍스 폼의 제조방법”, 한국, 출원번호 10-2014-0157222 (2014. 11. 12).
국내출원 (취하)
1. 김상우, 이준영, 연경열, 홍창국, “미세 입자경 토너 제조 방법”, 한국, 출원번호 10-2005-0045048 (2005. 05. 27). 취하
2. 홍창국, 정민영, 신요다, 연경열, 임상순, 박수범, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 출원번호 10-2006-0056541 (2006. 06. 22). 취하
3. 신요다, 연경열, 홍창국, 정민영, 임상순, 박수범, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 출원번호 10-2006-0060682 (2006. 06. 30). 취하
4. 신요다, 홍창국, 정민영, 연경열, 임상순, 박수범, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 출원번호 10-2006-0059243 (2006. 06. 29). 취하
5. 신요다, 홍창국, 정민영, 연경열, “토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 출원번호 10-2006-0076367 (2006. 08. 11). 취하
6. 신요다, 홍창국, 정민영, 연경열, “토너 조성물 제조법”, 한국, 출원번호 10-2006-0082487 (2006. 08. 29). 취하
7. 홍창국, 정민영, 연경열, 이정원, 심상은, “토너 조성물용 라텍스 제조방법 및 이를 이용한 토너 조성물 제조방법”, 한국, 출원번호 10-2006-0093512 (2006. 10. 07). 취하
8. 홍창국, 정민영, 연경열, 이정원, 심상은, “토너 조성물용 라텍스 제조방법 및 이를 이용한 토너 조성물 제조방법”, 한국, 출원번호 10-2006-0093511 (2006. 10. 07). 취하
9. 신요다, 연경열, 홍창국, 정민영, “토너 제조 공정”, 한국, 출원번호 10-2006-0106505 (2006. 11. 02) 취하
10. 정민영, 홍창국, 신요다, 이정원, 연경열, 임상순, “ 토너의 제조방법 및 이를 이용하여 제조된 토너”, 한국, 출원번호 10-2006-0113046 (2006. 11. 15). 취하
11. 신요다, 연경열, 홍창국, 정민영, 방경, “토너 제조방법 및 이를 이용하여 제조된 토너”, 한국, 출원번호 10-2006-0116071 (2006. 11. 22). 취하
12.
국제출원 (확인 불가능)
1. R. P. Wool and C. K. Hong, “Low Dielectric Constant Materials from Plant Oils and Feathers”, US Patent Application Pub. US 2004 0072976 (2004. 04. 15).
2. J. Lee, S. Kim, K. Yon and C. K. Hong, “Method for Preparing Polymer Latex Particles Having Core/Shell Structure”, US Patent Application Pub. US 2006 0228642 (2006. 10. 12).
3. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0026337 (2007. 02. 01).
4. J. Lee, K. Yon, C. K. Hong, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the method”, US Patent Application Pub. US 2007 0048644 (2007. 03. 01).
5. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0059624 (2007. 03. 15).
6. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner Using Reformed Plant Oil and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0072106 (2007. 03. 29).
7. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0072107 (2007. 03. 29).
8. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Electrophotographic Toner and Method of Preparing Toner”, US Patent Application Pub. US 2007 0117034 (2007. 05. 24).
9. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0122732 (2007. 05. 31).
10. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0134583 (2007. 06. 14).
11. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0154830 (2007. 07. 05). Issued
12. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0154831 (2007. 07. 05).
13. C. K. Hong, K. Yon, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0154832 (2007. 07. 05).
14. J. Lee, K. Yon, C. K. Hong, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the method”, US Patent Application Pub. US 2007 0166637 (2007. 07. 19).
15. M. Cheong, S. Lim, K. Yon, C. K. Hong, Y. Shin, S. Park, H. Kim, S. Park, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0269731 (2007. 11. 22).
16. C. K. Hong, M. Cheong, Y. Shin, K. Yon, S. Lim, S. Park, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2007 0298345 (2007. 12. 27).
17. Y. Shin, C. K. Hong, M. Cheong, K. Yon, S. Lim, S. Park, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2008 0003514 (2008. 01.03).
18. Y. Shin, K. Yon, C. K. Hong, M. Cheong, S. Lim, S. Park, “Method of Preparing Toner and Toner Prepared Using the Method”, US Patent Application Pub. US 2008 0003515 (2008. 01.03).
19. Y. Shin, C. K. Hong, M. Cheong, K. Yon, “Method of Preparing Toner, Toner Prepared Using the Method, and Method and Device for Forming Image Using the Toner”, US Patent Application Pub. US 2008 0063967 (2008. 03. 13).
20. C. K. Hong, J. Lee, K. Yon, M. Cheong, S. Shim, “Method of Preparing Latex for Toner Composition and Method of Preparing Toner Composition Using the Same”, US Patent Application Pub. US 2008 0076053 (2008. 03. 27).
21. C. K. Hong, J. Lee, K. Yon, M. Cheong, S. Shim, “Method of Preparing Latex for Toner Composition and Method of Preparing Toner Composition Using the Same”, US Patent Application Pub. US 2008 0076057 (2008. 03. 27).
22. K. Pang, K. Yon, C. K. Hong, S. E. Shim, J. Lee, M. Cheong, “Method of Preparing Resin Composition of Toner and Toner Composition Having the Same”, US Patent Application Pub. US 2008 0102394 (2008. 05. 01).
23. M. Cheong, C. K. Hong, Y. Shin, J. Lee, K. Yon, S. Lim, “Method of Preparing Toner, Toner Prepared Using the Method, Method of Forming Image Using the Toner, and Image Forming Apparatus Employing the Toner”, US Patent Application Pub. US 2008 0113290 (2008. 05. 15).
24. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, EP 1748320 (2007. 01. 31).
25. M. Cheong, S. Lim, K. Yon, C. K. Hong, Y. Shin, S. Park, H. Kim, S. Park, “Method of Preparing Electrophotographic Toner and Toner Prepared Using the Method”, EP 1857883 (2007. 11. 22).
26. C. K. Hong, M. Cheong, Y. Shin, K. Yon, S. Lim, S. Park, “Method of Preparing Toner and Toner Prepared Using the Method”, EP 1870776 (2007. 12. 26).
27. Y. Shin, K. Yon, C. K. Hong, M. Cheong, S. Lim, S. Park, “Method of Preparing Toner and Toner Prepared Using the Method”, EP 1873589 (2008. 1. 2).
28. Y. Shin, C. K. Hong, K. Yon, M. Cheong, S. Lim, S. Park, “Toner and Method of Preparing the Same”, EP 1873590 (2008. 1. 2).
29. Y. Shin, C. K. Hong, M. Cheong, K. Yon, “Method of Preparing Toner, Toner Prepared Using the Method, and Method and device for forming image using the toner”, EP 1887431 (2008. 2. 13).
30. J. Lee, S. Kim, K. Yon, C. K. Hong, “Method for Preparing Pigment Filled Core/Shell Acrylic Latex Particles”, JP 2006 291200 (2006. 10. 26).
31. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, JP 2007 034310 (2007. 02. 08).
32. J. Lee, K. Yon, C. K. Hong, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, JP 2007 065675 (2007. 03. 15).
33. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Electrophotographic Toner and Its Manufacture”, JP 2007 079576 (2007. 03. 29).
34. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Toner and Toner Prepared Using the Method”, CN 1904745 (2007. 01. 31).
35. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Electrophotographic Toner and Its Manufacture”, CN 1928727 (2007. 03. 14).
36. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Method of Preparing Environmentally Friendly Electrophotographic Toner Using Reformed Plant Oil and Toner Prepared Using the Method”, CN 1936714 (2007. 03. 28).
37. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Electrophotographic Core Shell Type Toner Showing Narrow Particle Size Distribution and Toner Prepared Using the Method”, CN 1936713 (2007. 03. 28).
38. C. K. Hong, K. Yon, J. Lee, M. Cheong, “Electrophotographic Toner and Method of Preparing Toner”, CN 1971434 (2007. 05. 30).
39. M. Cheong, K. Yon, C. K. Hong, J. Lee, “Method of Preparing Toner and Toner Prepared Using the Method”, CN 1971433 (2007. 05. 30).
Owned by PEML @ JNU
Last updated 5/4/2017