Projects

출원 : 해외 34편, 국내 1편

해외

2014. 07

박경수
Design Modifications to Improve the Antishock Performance of a Stamped Base for a 2.5-in HDD
IEEE Transactions on Magnetics

2014. 07

박경수
An advanced guide feeding system for optical disc drives
Microsystem Technologies

2014. 08

박경수
Analysis of the correlation between acoustic noise and vibration generated                                         by a multi‑layer ceramic capacitor
Microsystem Technologies

2015

박경수
Application of seismic analysis methodology to small modular integral reactor internals
Nuclear science and technology

2015. 12

박경수
Design parametric study on the influence of anti‑shock performance during operational condition for a 2.5 inch HDD
Microsystem Technologies

2015. 12

박경수
Advanced operational shock analysis considering ramp–disk contact for 2.5‑inch stamped base HDD
Microsystem Technologies

2015. 12

박경수
Advanced air‑bearing modeling for operational shock analysis of                                                              a 2.5‑inch HDD with ramp–disk contact
Microsystem Technologies

2015. 12

박경수
Analysis of the influence of soldering parameters on multi‑layer ceramic capacitor vibration
Microsystem Technologies

2015. 12

박경수
Flying stability of a slider with a damaged diamond like carbon layer induced by confined optical energy in a thermally assisted magnetic recording system
Microsystem Technologies

2015. 12

박경수
Analysis of thermal flying‑height control slider in a hard disk drive under humid air condition
Microsystem Technologies

2015. 12

박경수
Influence of disk curvature on slider attitude under operational shock conditions for                           a 2.5-in. hard disk drive
Microsystem Technologies

2016. 06

박경수
Analysis of accumulated lubricant for air–helium gas mixture in HDDs
Microsystem Technologies

2016. 06

박경수
The optimal helium fraction for air–helium gas mixture HDDs
Microsystem Technologies

2016. 06

허준무, 최성현, 박경수
Workspace analysis of a 6-DOF cable-driven parallel robot considering pulley bearing friction under ultra high acceleration
Microsystem Technologies

2016. 06

도현동, 박경수
Analysis of Effective Vibration Frequency of Cable-Driven Parallel Robot using Mode Tracking and Quasi-Static Method
Microsystem Technologies

2017. 01

도현동, 박경수
Wrench-feasible workspace analysis considering aerodynamics of                                                    aerial robotic camera under high speed
Microsystem Technologies

2016. 08

박경수
Operational Shock Analysis for 2.5-in Multi-Disk HDD Considering Ramp-Disk Gap Irregularity
IEEETransactionsonMagnetics

2017. 02

박경수
Analysis of the Loading process of a Slider With Reflowed Lubrication in a Hard Disk Drive
IEEETransactionsonMagnetics

2017. 03

박경수
Analysis of the Influence of the Ramp and Disk Dynamics on the HDI Response of                            2.5-in Hard Disk Drive to a Shock
IEEETransactionsonMagnetics

2017. 03

박경수
Analysis of Slider Dynamics Considering the Mechanical Spacing in the                                           Slider-Lubricant Contact Regime
IEEETransactionsonMagnetics

2017. 08

최성현, 박경수
Tension analysis of a 6-degree-of-freedom cable-driven parallel robot considering                  dynamic pulley bearing friction.
Advances in Mechanical Engineering

2018. 03

허준무,박경수
Workspace and stability analysis of a 6-DOF cable-driven parallel robot using frequency-based variable constraints
Journal of Mechanical Science and Technology

2018. 03

최성현,박경수
Integrated and nonlinear dynamic model of a polymer cable for                                                          low-speed cable-driven parallel robots
MicrosystemTechnologies

2018. 06

박경수
Nano-andsubmicro-sizedthree-dimensionalshapemeasuringsystemusing a                                       SAW-based capacitance sensor
Journal of Mechanical Science and Technology

2019. 07

하휘, 박정완, 박경수
Advanced numerical analysis for vibration characteristics and ride comfort of                                ultra-high-speed maglev train
Microsystem Technologies

2019. 07

강정민, 최성현, 박정완, 박경수
Position error prediction using hybrid recurrent neural network algorithm for improvement of pose accuracy of cable driven parallel robots
Microsystem Technologies

2019. 03

박경수
Investigation of the thermal effect of a tubular permanent magnet actuator with a water cooling channel for active lateral suspension of a high-speed train
Advances in Mechanical Engineering

2019. 03

하휘, 박경수
Construction of simulation framework for dynamic analysis of a superconducting magnetic levitation train with flexible car bodies
Journal of Mechanical Science and Technology

2020. 02

류현기, 박경수
Experimental and numerical analysis of the equilibrium shape of                                                    sessile drop-lets on elastic thin membranes
Journal of Mechanical Science and Technology

2020. 02

박동수, 박경수
Numerical analyses of the coupleddynamic behavior of droplets on a vibrating membrane with a microsphere array at a three-phase interface
Journal of Mechanical Science and Technology

2020. 05

Dinh, T. N., Park, J., & Park, K. S.
Design and evaluation of disturbance observer algorithm for cable-driven parallel robots. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE
AND PROCESSING SYSTEMS.

2020. 06

Ryu, H. G., & Park, K. S.
Analysis on the deflection of thin membrane with a droplet according
to the surface tension and elasticity.
Microsystem Technologies, 26(11), 3489-3499.

2020. 07

Xu, J., & Park, K. S.
A real-time path planning algorithm for cable-driven parallel robots
in dynamic environment based on artificial potential guided RRT.
Microsystem Technologies, 26(11), 3533-3546.

국내

2020

류현기, 손동훈, 김준, 이동근 박경수
등가 대기 속도를 활용한 돌풍 하중에 따른 무인 항공기 고소작업대의 구조물 안전성 해석. 한국소음진동공학회논문집, 30(5), 482-489.