Download Canon Printer Drivers from Canon.com/ijsetup then Install and set up your canon printer product by visiting www.canon.com/ijsetup. If you just bought a new canon printer, then you have to set it up via canon.com/ijsetup.

Weather you are a new or old use of Canon printers, you have to visit the official website of Canon. Canon offers the most advanced and efficient printing services, smoothening production, and mind-blowing prints. The first thing you have to do when you purchase a new printer or re-setup your existing printing device is to download the printer driver from www.canon.com/ijsetup.

Download, Setup, and Install Canon Drivers and Software

• Go to canon.com/ijsetup.

• Enter your canon.com ijsetup printer model in the box. When your model appears below the box, click it.

• Select Drivers and Downloads to one side of the picture of your model.

• Select the Drivers, Software, or Firmware tab relying upon what you need to download.

• Choose the Select button to one side of the product or driver document you wish to download. The Select button at that point turns into a Close button.

• Select Download and save the file to your computer.

Install canon printer drivers through canon.com/ijsetup

• Download Printer drivers: Goto canon.com/ijstup and download the driver according to your printer model number.

• Select connection type: Double-click on the cannon.com/ijsetup icon and choose your connection type (USB or Wireless).

• Power On your Printer: Turn your printer on by pressing the power button.

• Wireless Connection: To turn on the printer’s WIFI, press the WIFI alarm button.

• Confirm Connection: If you see the flashing lights (green & blue), then your printer is connected.

• Read Term & Agree: Now click on the “I agree” button to proceed with the installation.

• Final steps: click on the finish button to complete the installation process.

Printer Connection

Now let us carry on towards the network link of your Canon Printer. There are three options from which you can select one.

• USB Printing Setup

• Ethernet Connection

• Wireless Network Setup

Connection Setup Using USB wire

• USB wire ports are known that are used to plug-in USB wire or Ethernet wire in your PC or network router.

• Mainly computers are linked to a wired network by one built-in Ethernet port.

• USB or Ethernet wires are dissimilar from the ones that you use to connect your phone.

• Put in both the port of the USB wire in your printer and another on your PC.

• Now follow the on-screen commands and install the canon.com setup printer driver software.

Ethernet Setup

• Initial, Make sure that you have an Ethernet wire to support your printer model.

• At what time choosing the connection type during the installation, confirm you pick Wired Network or Ethernet option.

• So now you require a network router.

• A switch or hub with obtainable Ethernet ports is necessary if the router doesn’t have any free ports.

• Attach the Ethernet ports with printer and router.

• This will set up the connection amid your printer and network router.

Best Way to install Canon Printer Setup on Mac –

Downloading Canon Printer Setup from canon.com/ijsetup for Mac can be installed by the below steps.

Using USB cable

• Using The USB cable, connect your printer to the Mac device.

• To install canon printer drivers automatically, click on Add Printer.

• Wait for the complete installation.

• In case if you face issues with the above steps, then download the setup from canon.com/ijsetup.

Wireless installation

• Open and start the printer and find the WPS button on the Wi-Fi router.

• From the htp://canon.com/ijsetup MAC, download printer drivers on Mac.

• Open the file and follow along with further steps.

• Press WPS button WIFI.

• Press the OK button on the canon printer.

• It will automatically connect using the network.

• On Mac, click on ADD PRINTER.

• Now, browse or locate the printer.

• Start the installation and complete it.

• Check the print of files to confirm.

Canon Printer Drivers Download

To run your printer and get the prints in your production you require having drivers and software on your computer. As drivers allow the printing and send the printing command to the printer. Let’s begin:

• Switch on your printer and the computer.

• Now open the browser and go to canon.com/ijsetup or ij start.cannon

• Next Enter Model Number Search bar

• After that Click the go button

• Click on Download and follow the on-screen commands to whole the setup.

• After the download procedure is done you can see it in the download folder.

• Now you require installing the Canon Printer drivers, but previous to this make sure the printer linked with the computer.

• Open the setup file in the Downloads folder and then run the setup.

• Now click on the Install option and begin installing, follow the on-screen instructions to complete the setup.