Canon PIXMA MG3020 Setup and Driver Download

Canon PIXMA MG3020 Setup For Windows:

• For the start, you will need to prepare all of the things that you
  need such as the laptop, the printer, the USB cable that connects the
  printer to the laptop, and also the CD driver.

• Make sure the USB cable is compatible with the USB slot in your laptop.

• If you lost the CD driver, then you can simply download the installation files from the website.

• Make sure you download the one that suit your printer model.

• Once you have prepared all of those things, you just need to simply
  run the installation setup program that you already have, from the CD
  driver or from the files that you downloaded.

• The next thing that you need to do is waiting for the whole process to be finished.

• During this time, you will be asked to pick some options such as the
  components, the installation locations, your name, and some other
  things.

• Make sure you fill the options correctly.

• Once the installation wizard is finished, your printer is ready to
  go. You need to start printing a page to make sure that the printer has
  been successfully installed.

Canon PIXMA MG3020 Setup For Mac:

• Procedures for the download and installation

• Download the file. For the location where the file is saved, check the computer settings.

• Double-click the downloaded file and mount it on the Disk Image.

• Double-click the mounted Disk Image.

• Double-click the packaged file in the folder. Installation starts automatically.

Canon Pixma MG3020 Wireless Setup:

• Make sure that the printer Canon MG3020 is turned on.

• Press and hold the [Wi-Fi ] button on the top of the printer until the orange alarm lamp flashes once and then release it.

• Make sure that the Wi-Fi button starts to flash blue and then go to
  your access point and press the [WPS] button within 2 minutes.

• Make sure that your printer is turned on.

• Load a sheet of A4 or Letter-sized plain paper.

• Press and hold the Cancel Button, button until the orange alarm lamp
  flashes 15 times and then release it. The network information page will
  be printed.on CD that came with your product, please download the manuals and software.

• If the Canon MG3020 wireless

• This concludes the WPS setup procedure.

• Please now proceed by installing the software to make the most out of your PIXMA MG3020.

• If you do not have the installati

• setup is still failing after following this guide, please contact us for further assistance for Canon Pixma MG3020 Wireless Setup

Fixing Canon pixma mg3020 manual steps are hereby given below:

Step 1: Be sure that the printer is switched ON.

Step 2: Press & hold the WiFi button available on the top of the printer till the alarm lamp flashes once.

Step 3: Ensure that the lamp next to this button starts flashing.

Step 4: The WiFi lamp on the printer will continue flashing while searching, and the WiFi lamp and power will flash when connecting to the access point.

Step 5: When the connection has successfully established with your wireless network, the Wifi lamp and Power will stop flashing and remain lit.

Amazing Steps for Connecting Canon PIXMA MG3020 printer to WiFi

Step 1: Switch on your printer for your Canon PIXMA setup.

Step 2: Ensure that there is a steady green light beside the Power button.

Step 3: Proceed to press and hold the wireless button.

Step 4: With blue wireless button LED or flashing, press the color button on your Canon PIXMA.

Step 5: Press the wireless button once until the network light is lit.

Step 6: Hit on the color button and check whether the wireless light is blinking fast.

Step 7: Insert the Canon PIXMA MG3020 driver CD, which you would have got when purchasing your printer into the CD drive.

Step 8: Tap on the Start Setup button to go with the installation process.

Step 9: When you get encouraged, Connect canon mg3020 printer to WiFi through the wireless network using the router.

Step 10: To connect through a wireless network, Switch on your router by plugging the power cable in the power socket.

Step 11: Press the WiFi button that you can find on your printer and keep pressing it until the light gets on.

Step 12: After waiting sometimes, press the WPS button located on the router.

Step 13: Once the WiFi and power lights become stable, the WiFi network will connect to your printing device.

Step 14: Now, give a command to print a test page and be sure that the device is operating properly.

Download Driver Visiting By ij.start.cannon setup