Unit 8 Aquatic and Terrestrial Pollution

Objectives and Essential Knowledge

ENDURING UNDERSTANDING

  • STB-3 Human activities, including the use of resources, have physical, chemical, and biological consequences for ecosystems.

8.1 Sources of Pollution

LEARNING OBJECTIVE

  • STB-3.A Identify differences between point and nonpoint sources of pollution.

ESSENTIAL KNOWLEDGE

  • STB-3.A.1 A point source refers to a single, identifiable source of a pollutant, such as a smokestack or waste discharge pipe.

  • STB-3.A.2 Nonpoint sources of pollution are diffused and can therefore be difficult to identify, such as pesticide spraying or urban runoff.

Content:

AP Video Lecture: https://youtu.be/2swIzu3rzII

8.2 Human Impacts on Ecosystems

LEARNING OBJECTIVE

  • STB-3.B Describe the impacts of human activities on aquatic ecosystems.

ESSENTIAL KNOWLEDGE

  • STB-3.B.1 Organisms have a range of tolerance for various pollutants. Organisms have an optimum range for each factor where they can maintain homeostasis. Outside of this range, organisms may experience physiological stress, limited growth, reduced reproduction, and in extreme cases, death.

  • STB-3.B.2 Coral reefs have been suffering damage due to a variety of factors, including increasing ocean temperature, sediment runoff, and destructive fishing practices.

  • STB-3.B.3 Oil spills in marine waters cause organisms to die from the hydrocarbons in oil. Oil that floats on the surface of water can coat the feathers of birds and fur of marine mammals. Some components of oil sink to the ocean floor, killing some bottom-dwelling organisms.

  • STB-3.B.4 Oil that washes up on the beach can have economic consequences on the fishing and tourism industries.

  • STB-3.B.5 Oceanic dead zones are areas of low oxygen in the world’s oceans caused by increased nutrient pollution.

  • STB-3.B.6 An oxygen sag curve is a plot of dissolved oxygen levels versus the distance from a source of pollution, usually excess nutrients and biological refuse.

  • STB-3.B.7 Heavy metals used for industry, especially mining and burning of fossil fuels, can reach the groundwater, impacting the drinking water supply.

  • STB-3.B.8 Litter that reaches aquatic ecosystems, besides being unsightly, can create intestinal blockage and choking hazards for wildlife and introduce toxic substances to the food chain.

  • STB-3.B.9 Increased sediment in waterways can reduce light infiltration, which can affect primary producers and visual predators. Sediment can also settle, disrupting habitats.

  • STB-3.B.10 When elemental sources of mercury enter aquatic environments, bacteria in the water convert it to highly toxic methylmercury.

8.3 Endocrine Disruptors

LEARNING OBJECTIVE

  • STB-3.C Describe endocrine disruptors.

ESSENTIAL KNOWLEDGE

  • STB-3.C.1 Endocrine disruptors are chemicals that can interfere with the endocrine system of animals.

LEARNING OBJECTIVE

  • STB-3.D Describe the effects of endocrine disruptors on ecosystems.

ESSENTIAL KNOWLEDGE

  • STB-3.D.1 Endocrine disruptors can lead to birth defects, developmental disorders, and gender imbalances in fish and other species.

8.4 Human Impacts on Wetlands and Mangroves

LEARNING OBJECTIVE

  • STB-3.E Describe the impacts of human activity on wetlands and mangroves.

ESSENTIAL KNOWLEDGE

  • STB-3.E.1 Wetlands are areas where water covers the soil, either part or all of the time.

  • STB-3.E.2 Wetlands provide a variety of ecological services, including water purification, flood protection, water filtration, and habitat.

  • STB-3.E.3 Threats to wetlands and mangroves include commercial development, dam construction, overfishing, and pollutants from agriculture and industrial waste.

8.5 Eutrophication

LEARNING OBJECTIVE

  • STB-3.F Explain the environmental effects of excessive use of fertilizers and detergents on aquatic ecosystems.

ESSENTIAL KNOWLEDGE

  • STB-3.F.1 Eutrophication occurs when a body of water is enriched in nutrients.

  • STB-3.F.2 The increase in nutrients in eutrophic aquatic environments causes an algal bloom. When the algal bloom dies, microbes digest the algae, along with the oxygen in the water, leading to a decrease in the dissolved oxygen levels in the water. The lack of dissolved oxygen can result in large die-offs of fish and other aquatic organisms.

  • STB-3.F.3 Hypoxic waterways are those bodies of water that are low in dissolved oxygen.

  • STB-3.F.4 Compared to eutrophic waterways, oligotrophic waterways have very low amounts of nutrients, stable algae populations, and high dissolved oxygen.

  • STB-3.F.5 Anthropogenic causes of eutrophication are agricultural runoff and wastewater release.

8.6 Thermal Pollution

LEARNING OBJECTIVE

  • STB-3.G Describe the effects of thermal pollution on aquatic ecosystems.

ESSENTIAL KNOWLEDGE

  • STB-3.G.1 Thermal pollution occurs when heat released into the water produces negative effects to the organisms in that ecosystem.

  • STB-3.G.2 Variations in water temperature affect the concentration of dissolved oxygen because warm water does not contain as much oxygen as cold water.

8.7 Persistent Organic Pollutants (POPs)

LEARNING OBJECTIVE

  • STB-3.H Describe the effect of persistent organic pollutants (POPs) on ecosystems.

ESSENTIAL KNOWLEDGE

  • STB-3.H.1 Persistent organic pollutants (POPs) do not easily break down in the environment because they are synthetic, carbon-based molecules (such as DDT and PCBs).

  • STB-3.H.2 Persistent organic pollutants (POPs) can be toxic to organisms because they are soluble in fat, which allows them to accumulate in organisms’ fatty tissues.

  • STB-3.H.3 Persistent organic pollutants (POPs) can travel over long distances via wind and water before being redeposited.

8.8 Bioaccumulation and Biomagnification

LEARNING OBJECTIVE

  • STB-3.I Describe bioaccumulation and biomagnification.

ESSENTIAL KNOWLEDGE

  • STB-3.I.1 Bioaccumulation is the selective absorption and concentration of elements or compounds by cells in a living organism, most commonly fat-soluble compounds.

  • STB-3.I.2 Biomagnification is the increase in concentration of substances per unit of body tissue that occurs in successively higher trophic levels of a food chain or in a food web.

LEARNING OBJECTIVE

  • STB-3.J Describe the effects of bioaccumulation and biomagnification.

ESSENTIAL KNOWLEDGE

  • STB-3.J.1 Some effects that can occur in an ecosystem when a persistent substance is biomagnified in a food chain include eggshell thinning and developmental deformities in top carnivores of the higher trophic levels.

  • STB-3.J.2 Humans also experience harmful effects from biomagnification, including issues with the reproductive, nervous, and circulatory systems.

  • STB-3.J.3 DDT, mercury, and PCBs are substances that bioaccumulate and have significant environmental impacts.

8.9 Solid Waste Disposal

LEARNING OBJECTIVE

  • STB-3.K Describe solid waste disposal methods.

ESSENTIAL KNOWLEDGE

  • STB-3.K.1 Solid waste is any discarded material that is not a liquid or gas. It is generated in domestic, industrial, business, and agricultural sectors.

  • STB-3.K.2 Solid waste is most often disposed of in landfills. Landfills can contaminate groundwater and release harmful gases.

  • STB-3.K.3 Electronic waste, or e-waste, is composed of discarded electronic devices including televisions, cell phones, and computers.

  • STB-3.K.4 A sanitary municipal landfill consists of a bottom liner (plastic or clay), a storm water collection system, a leachate collection system, a cap, and a methane collection system.

LEARNING OBJECTIVE

  • STB-3.L Describe the effects of solid waste disposal methods.

ESSENTIAL KNOWLEDGE

  • STB-3.L.1 Factors in landfill decomposition include the composition of the trash and conditions needed for microbial decomposition of the waste.

  • STB-3.L.2 Solid waste can also be disposed of through incineration, where waste is burned at high temperatures. This method significantly reduces the volume of solid waste but releases air pollutants.

  • STB-3.L.3 Some items are not accepted in sanitary landfills and may be disposed of illegally, leading to environmental problems. One example is used rubber tires, which when left in piles can become breeding grounds for mosquitoes that can spread disease.

  • STB-3.L.4 Some countries dispose of their waste by dumping it in the ocean. This practice, along with other sources of plastic, has led to large floating islands of trash in the oceans. Additionally, wildlife can become entangled in the waste, as well as ingest it.

8.10 Waste Reduction Methods

LEARNING OBJECTIVE

  • STB-3.M Describe changes to current practices that could reduce the amount of generated waste and their associated benefits and drawbacks.

ESSENTIAL KNOWLEDGE

  • STB-3.M.1 Recycling is a process by which certain solid waste materials are processed and converted into new products.

  • STB-3.M.2 Recycling is one way to reduce the current global demand on minerals, but this process is energy-intensive and can be costly.

  • STB-3.M.3 Composting is the process of organic matter such as food scraps, paper, and yard waste decomposing. The product of this decomposition can be used as fertilizer. Drawbacks to composting include odor and rodents.

  • STB-3.M.4 E-waste can be reduced by recycling and reuse. E-wastes may contain hazardous chemicals, including heavy metals such as lead and mercury, which can leach from landfills into groundwater if they are not disposed of properly.

  • STB-3.M.5 Landfill mitigation strategies range from burning waste for energy to restoring habitat on former landfills for use as parks.

  • STB-3.M.6 The combustion of gases produced from decomposition of organic material in landfills can be used to turn turbines and generate electricity. This process reduces landfill volume.

8.11 Sewage Treatment

LEARNING OBJECTIVE

  • STB-3.N Describe best practices in sewage treatment.

ESSENTIAL KNOWLEDGE

  • STB-3.N.1 Primary treatment of sewage is the physical removal of large objects, often through the use of screens and grates, followed by the settling of solid waste in the bottom of a tank.

  • STB-3.N.2 Secondary treatment is a biological process in which bacteria break down organic matter into carbon dioxide and inorganic sludge, which settles in the bottom of a tank. The tank is aerated to increase the rate at which the bacteria break down the organic matter.

  • STB-3.N.3 Tertiary treatment is the use of ecological or chemical processes to remove any pollutants left in the water after primary and secondary treatment.

  • STB-3.N.4 Prior to discharge, the treated water is exposed to one or more disinfectants (usually, chlorine, ozone, or UV light) to kill bacteria.

8.12 Lethal Dose 50% (LD50)

LEARNING OBJECTIVE

  • EIN-3.A Define lethal dose 50% (LD50).

ESSENTIAL KNOWLEDGE

  • EIN-3.A.1 Lethal dose 50% (LD50) is the dose of a chemical that is lethal to 50% of the population of a particular species.

8.13 Dose Response Curve

LEARNING OBJECTIVE

  • EIN-3.B Evaluate dose response curves.

ESSENTIAL KNOWLEDGE

  • EIN-3.B.1 A dose response curve describes the effect on an organism or mortality rate in a population based on the dose of a particular toxin or drug.

8.14 Pollution and Human Health

LEARNING OBJECTIVE

  • EIN-3.C Identify sources of human health issues that are linked to pollution.

ESSENTIAL KNOWLEDGE

  • EIN-3.C.1 It can be difficult to establish a cause and effect between pollutants and human health issues because humans experience exposure to a variety of chemicals and pollutants.

  • EIN-3.C.2 Dysentery is caused by untreated sewage in streams and rivers.

  • EIN-3.C.3 Mesothelioma is a type of cancer caused mainly by exposure to asbestos.

  • EIN-3.C.4 Respiratory problems and overall lung function can be impacted by elevated levels of tropospheric ozone.

8.15 Pathogens and Infectious Diseases

LEARNING OBJECTIVE

  • EIN-3.D Explain human pathogens and their cycling through the environment.

ESSENTIAL KNOWLEDGE

  • EIN-3.D.1 Pathogens adapt to take advantage of new opportunities to infect and spread through human populations.

  • EIN-3.D.2 Specific pathogens can occur in many environments regardless of the appearance of sanitary conditions.

  • EIN-3.D.3 As equatorial-type climate zones spread north and south in to what are currently subtropical and temperate climate zones, pathogens, infectious diseases, and any associated vectors are spreading into these areas where the disease has not previously been known to occur.

  • EIN-3.D.4 Poverty-stricken, low-income areas often lack sanitary waste disposal and have contaminated drinking water supplies, leading to havens and opportunities for the spread of infectious diseases.

  • EIN-3.D.5 Plague is a disease carried by organisms infected with the plague bacteria. It is transferred to humans via the bite of an infected organism or through contact with contaminated fluids or tissues.

  • EIN-3.D.6 Tuberculosis is a bacterial infection that typically attacks the lungs. It is spread by breathing in the bacteria from the bodily fluids of an infected person.

  • EIN-3.D.7 Malaria is a parasitic disease caused by bites from infected mosquitoes. It is most often found in sub-Saharan Africa.

  • EIN-3.D.8 West Nile virus is transmitted to humans via bites from infected mosquitoes.

  • EIN-3.D.9 Severe acute respiratory syndrome (SARS) is a form of pneumonia. It is transferred by inhaling or touching infected fluids.

  • EIN-3.D.10 Middle East Respiratory Syndrome (MERS) is a viral respiratory illness that is transferred from animals to humans.

  • EIN-3.D.11 Zika is a virus caused by bites from infected mosquitoes. It can be transmitted through sexual contact.

  • EIN-3.D.12 Cholera is a bacterial disease that is contracted from infected water.

Notes and Powerpoint

Review Videos From College Board

The link is a playlist of review videos for Environmental Science put out by the college board. They will also be linked individually in the appropriate topic section above.