Router Ethernet Not Working? Here’s How To Fix It

Ethernet is the best way to get a stable and fast internet connection. However, since the Ethernet cable and ports are exposed, they are also prone to more hardware issues than WiFi. Such problems can inhibit the Ethernet connection from working properly.

Your computer or any device using the internet may also have issues in its software components preventing proper usage of Ethernet. So, we have created this article to help you solve such issues.

Why is Router Ethernet Not Working?

There are many reasons for your router Ethernet to stop working. Some of them are as follows:

• Physical damage to the Ethernet port.

• Internal damage on the Ethernet cable.

• Ethernet disabled on your system.

• Reaching the session limit on your router.

• Ethernet driver issues.

How to Fix Router Ethernet Not Working?

Here is the step-by-step guide on how you can fix a dysfunctional Router Ethernet.

Narrow Down the Problematic Device

First, turn WiFi off on your PC and execute the following processes to narrow down the faulty device:

• Unplug and reconnect the Ethernet cable on the same port. Some Ethernet devices have a sleeping feature that turns them inactive when not using the internet. Reconnecting the cable takes care of this issue.

• Reinsert the Ethernet cable on another port (both router and your device).

• Switch to another Ethernet cable.

• Use Ethernet Cable Testers or Loop Feedback tools to check for internal breaks.

• Connect the Ethernet cable to another PC.

Doing all these things should help you determine if the fault is with the Router/Modem, the cable, or your PC. Afterward, move on to the relevant sections to find the troubleshooting methods.

Troubleshoot Issues With Router/Cable

If you have narrowed down your issue to router or cable faults, apply the methods below:

Check for Physical Damage

If an Ethernet cable doesn’t work, the cord may have internal damage. It’s also possible that the RJ-45 connector has bent wires. The easiest solution is to replace the cable altogether.

But you can also use RJ45 Network Cable Testers to check for discontinuity. You can also cut the cable at an appropriate point and install an RJ-45 jack if it’s inconvenient to replace the cable. We recommend seeking help from a technician if you don’t have the necessary tools and skills.

Make sure to avoid sharp bends or twists while plugging in the cable to any device. Keeping the Ethernet cable at a touching distance from other cables may also cause electromagnetic interference. So remember to avoid doing so as well.

If one of the Router ports doesn’t work, you simply need to connect it to another. Or you can check for bent pins and try to straighten them out. You need to buy a new router if you need multiple Ethernet connections and lack enough free ports.

Power Cycle Router or Modem

Power cycling or restarting a router/modem clears its cache, resets all active sessions, and removes unwanted devices from your network. If other sessions or devices are limiting your LAN usage, you won’t be able to access the internet, hence the need for a reboot.

To power cycle a router or modem, unplug its power cord, wait for a minute, and power it up again. We recommend power cycling your router regularly (once every two weeks) for better performance.

Factory Reset Router

An improper network configuration on the router can also cause this issue. Instead of accessing the router portal and checking each setting, it’s better to perform a factory reset. Doing so restores all default settings for the router, none of which block the Ethernet connection.

To perform a factory reset,

1. Look for the reset button on your router.

2. Press and hold until the router restarts.

Troubleshoot Issues With Computer

You may wrongly believe your router is faulty when the issue is with your PC. If the Ethernet doesn’t work on one PC but works on others, try the following solutions to resolve such issues.

Check Ethernet Status

The first thing you should do on your PC is to check the Ethernet status. Here’s how you can do so:

On Windows

1. Press Win + R to open Run.

2. Type ncpa.cpl and press Enter.

3. If Ethernet is grayed out and shows Disabled, right-click on it and select Enable.
   

On Mac

1. Go to Apple menu > System Preferences > Network.

2. Search for Ethernet on the list on the left.

3. If it’s not present, click + and set the Interface to Ethernet.

4. Click Ok and then Apply.

In very rare cases, your network icon may show WiFi when both Ethernet and WiFi are connected. So, you may think the Ethernet is not working. You can check the status of Ethernet from the above steps to check if it’s functional. In such cases, it should show Connected or an SSID.

Run Network Troubleshooter

Windows has dedicated troubleshooting features to check and fix minor system errors. You can try running the Ethernet Troubleshooter if your Ethernet is not working. Here are the necessary steps:

1. Press Win + I to open Settings.

2. Go to System > Troubleshoot or Update & Security > Troubleshoot.

3. Click Additional troubleshooters or Other troubleshooters.

4. Click on Run next to Internet Connections and Network Adapter. Or select the option and click Run the troubleshooter.
   

Update or Reinstall Ethernet Driver

Another method you should try is to update or reinstall the Ethernet driver. If you upgrade your hardware without installing their software, incompatibility issues can arise. So, you need to update your drives. To do so,

1. Enter devmgmt.msc on Run to launch the Device Manager.

2. Expand Network Adapters.

3. Right-click on your LAN or Ethernet device and click Update driver.
   

4. Select Search automatically for drivers.

If you have the latest version of your driver, reinstall it. Doing so takes care of minor issues with the driver. You only need to uninstall the driver. Restarting your PC after that automatically installs the driver if your Ethernet cable is still connected.

Check Ethernet Power Configuration

Your Ethernet may stop working on Power saving mode if the relevant power management setting is On. Here’s how you can change the setting:

1. Open the Device Manager and expand to your Ethernet device.

2. Right-click on it and select Properties.

3. Go to the Power management tab.

4. Uncheck Allow the computer to turn off this device to save power.

5. Click Ok.

You can also run your PC on maximum performance to avoid this issue.

Reconfigure DNS Settings

By default, your system automatically obtains a DNS server address to allocate IP addresses. However, you can change this setting by setting a static DNS address. If you used an invalid DNS server, you can’t access the internet. Here’s how you can resolve this issue:

1. Open Run and enter ncpa.cpl.

2. Right-click on Ethernet and select Properties.

3. Double-click on Internet Protocol Version 4(TCP/IPv4).

4. Tick Obtain an IP address automatically.

5. You can check Obtain an DNS server automatically or Use the following DNS server addresses.

6. If you select the latter option, set a valid DNS server address. We recommend using the following public DNS addresses:

   • Google – 8.8.8.8 and 8.8.4.4

   • Cloudflare – 1.1.1.1 and 1.0.0.1
     

Disable Third-party Security Software

It is also possible that you can’t open certain websites on your PC while using the Ethernet. It can happen because of your Firewall or antivirus settings or network configuration issues. Disable all third-party security software on your PC and check if the issue persists. If it doesn’t, move on to the subsequent solution.

We recommend uninstalling third-party security software on Windows altogether. The default apps are more than enough to prevent all malware attacks. Just make sure to enable cloud protection for updating your antivirus database with the latest information.

Reset Network Configurations

You can also run some network commands to reset some network configuration. Doing so fixes many issues that block you from opening certain websites on your browser. It works both for WiFi or Ethernet connection. Here are the necessary steps for Windows:

1. Open Run.

2. Type cmd and press Ctrl + Shift + Enter to open the Elevated Command Prompt.

3. Enter the following commands:

   • netsh winsock reset

   • netsh int ip reset

   • ipconfig /release

   • ipconfig /renew

   • ipconfig /flushdns

4. On Mac, the commands are:

   • sudo ifconfig en0 down

   • sudo ifconfig en0 up

Reset Network Adapters

If the above method doesn’t fix the issue, you can try going one step further and resetting your Network adapters. To do so:

on Windows,

1. Open Settings.

2. Go to Network & Internet or Network & Internet > Advanced network settings.

3. Click Network reset > Reset now.
   

On Mac,

1. Go to Apple menu > System Preferences > Network.

2. Select Ethernet and click – (minus) from the icons below.

3. Then, click + (plus).

4. Set the Interface to Ethernet and click Ok.

5. Hit Apply.

Source:

https://www.technewstoday.com/router-ethernet-not-working/

https://gospeedcheck.com/article/ethernet-port-not-working-1055

https://sites.google.com/view/gospeedcheck/blog/router-ethernet-not-working-heres-how-to-fix-it

https://sites.google.com/view/gospeedcheck/blog/what-phones-are-compatible-with-cricket-wireless

https://sites.google.com/view/gospeedcheck/blog/does-cox-throttle-the-internet-all-you-need-to-know