Expansion Joints:

Exhaust expansion joint are designed to absorb the heat induced by expansion and contraction of pipe systems and exhaust system. The spring rates for best overall performance. The typical pressure rating for exhaust expansion joint, temperature depending is 1.0 BarG

Externally Pressurized Expansion joint are the best in solution when the expansion joint must absorb very large amount of axial movement under high pressure. Externally Pressurized Expansion Joint are well protected under a cover transport damage to the involvement is unlikely to occur but most importantly, the cover offers maximum protection against leaking bellows or bellows failure.

Axial Expansion Joint is designed to absorb to absorb axial movement (extension and compression in its longitudal axial movement direction). Axial Expansion Joint offers a simple and cost efficient solution in terms of movement compensation. Axial Expansion Joints can be equipped with all kinds of connectors, such welding ends or welded or lose (rotatable) flanges

Lateral Expansion Joint that mainly absorbs the lateral movement laterally along the section pipe. The lateral expansion joint is normally equipped with fixtures such as external tie rods, which allows the unit to absorb movements in all lateral direction but also absorbs the pressure thrust

Hinged Expansion Joint is a metallic assembly that can rotate in a single plane, used to absorb the changes resulting from the piping thermal expansion joint or contraction.

A Universal Expansion Joint contains two bellows with a connecting pipe or centre spool between them. It is usually furnished with the limit rods depending upon the service conditions.

Gimbal expansion joins are designed to permit angular rotation in any plane by the use of two pairs of hinges affixed to a common floating Gimbal ring.

A Pressure Balanced Expansion Joint is normally a double bellows expansion joint with side outlet between the bellows

Rectangulr metal Expansion Joints are designed to absorb the axial movements in all the three directions. The Rectangular bellows are mostly designed for very low pressure applications such as ducts, exhaust systems ventilation system etc

Flexible bellows, is also called as expansion joints are flexible elements that absorbs movement in the pipe system. These Movement absorb are defined by axial, lateral, angular, and universal movement