Most workshops only perform a simple gas top-up.
At DriveLab, we carry out a more complete aircon servicing process by extracting old refrigerant, removing contaminated compressor oil and refilling the system properly.
Over time, moisture, dirty oil and contaminants can build up inside the aircon system, affecting cooling efficiency and increasing compressor strain.
A proper flushing service helps:
✔ Restore colder air
✔ Improve cooling efficiency
✔ Reduce compressor strain
✔ Remove contaminated oil and moisture
✔ Maintain long-term aircon system performance
Recommended every 90,000KM or 2 years, whichever earlier.
Depending on vehicle usage conditions.
Adds refrigerant only
Old compressor oil remains
Moisture may remain inside
Temporary cooling improvement
Basic maintenance
Extracts and refills refrigerant properly
Compressor oil replaced
Vacuum moisture removal
More complete preventive servicing
Proper flushing process
Helps remove contaminated refrigerant oil, moisture and impurities from the system.
Existing refrigerant is properly recovered before refilling with fresh refrigerant.
Fresh compressor oil helps maintain lubrication and compressor efficiency.
Helps remove trapped moisture within the aircon system.
Checks system pressure and identifies abnormal readings.
Ensures proper cooling performance after servicing.
✔ Transparent pricing
✔ No hard selling
✔ Proper servicing process
✔ Professional equipment
✔ Preventive maintenance approach
✔ Appointment-based workflow
✔ Aircon not as cold as before
✔ Cooling takes longer
✔ Aircon becomes warm while idling
✔ Musty smell from air vents
✔ Compressor louder than usual
✔ Inconsistent cooling performance
Estimated servicing time: 1 hour – 1.5 hour
(May vary depending on vehicle condition)
E9 Premium, Woodlands
By Appointment Only
📅 Dedicated slot for every customer — no rushing
Keep your aircon in top condition. Avoid costly repairs. Drive with confidence.
📲 WhatsApp us now for a fast quote & booking:
Yes. Even if cooling is still acceptable, old compressor oil and moisture can accumulate over time.
Preventive servicing helps maintain cooling performance and long-term system efficiency.
Gas top-up simply adds refrigerant into the system.
Flushing involves recovering existing refrigerant, removing contaminated oil and refilling the system properly.
Approx. 60 to 90 minutes depending on vehicle condition.
Yes. We service most passenger vehicles and selected smaller commercial vehicles (Vans/10ft lorries)
Both R134a and R1234yf refrigerant systems are supported.
For commercial vehicles or R1234yf systems, please contact us for pricing and availability.