1. D.-K. Kim, Acoustic emission data-based monitoring of material damage and fracture, The Korean Society for Technology of Plasticity (KSTP) Materials Application Symposium, Seoul, Korea, (2026), in Korean.
2. J.-H. Kwon, D.-S. Kwon, D.-K. Kim, AI-assisted unveiling micromechanical failure mechanisms in metal matrix composite: in situ acoustic emission and neutron diffraction, The International Conference on Plasticity, Damage & Fracture, Geelong, Australia, (2026).
3. D-.K. Kim, J.-H. Kwon, S. Cho, H.W. Lee, H. Chae, W. Woo, In situ characterization of micromechanical damage in particle-reinforced aluminum matrix composite, The Korean Society for Composite Materials (KSCM), Fall Conference, Seoul, Korea, (2025), in Korean.
4. J.-H. Kwon, D.-S. Kwon, D.-K. Kim, In situ characterization of micromechanical damage in B4C/AA6061 composite: acoustic emission and neutron diffraction, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2025), in Korean.
5. J.-M. Heo, J.-H. Kwon, D.-K. Kim, Cryogenic high cycle fatigue fracture behavior of AA6082-T6 aluminum alloy, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Jeju, Korea, (2025), in Korean.
6. J.-H. Kwon, H. Lee, S. Cho, D.-K. Kim, Micromechanical damage mechanisms in particle-reinforced metal matrix composites: In situ acoustic emission and neutron diffraction, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Jeju, Korea, (2025), in Korean.
7. D.-S. Kwon, J.-H. Kwon, J.-M. Heo, H.-S. Park, D.-K. Kim, Evaluation of ductile fracture limits of CHQ steel wires based on unsupervised learning of acoustic emission signal, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Jeju, Korea, (2025), in Korean.
8. J.-H. Kwon, H. Lee, S. Cho, H. Chae, W. Woo, D.-K. Kim, Micromechanical damage mechanisms in B4C/AA6061 composite: In situ acoustic emission and neutron diffraction, The International Symposium on Characterization of Metals and Nanostructured Materials by Neutron and X-ray Synchrotron Scattering (NeXS), Kwangju, Korea (2025).
9. Z. Shan, C. H. Dang, W. Woo, D.-K. Kim, Residual stress and microstructure evolution in additive manufacturing: modeling and neutron diffraction study The International Symposium on Characterization of Metals and Nanostructured Materials by Neutron and X-ray Synchrotron Scattering (NeXS), Kwangju, Korea (2025).
10. D.H. Cong, Z. Shan, D.-P. Pham, K.-H. Jung, D.-K. Kim, Advanced simulation framework for predicting residual stresses and optimizing post-heat treatment in additive manufacturing, International Conference on welding and joining, Intermediate Meeting of Commission II and IX, Songdo, Korea, (2024).
11. X.M. Nguyen, D.H. Cong, M.T. Tran, A.R. Jo, S.-K. Hwang, D.-K. Kim, Finite element simulation of ductile fracture mechanisms in AlSi10Mg processed by laser powder bed fusion, The Korean Society for Technology of Plasticity (KSTP) Spring Workshop, Seoul, Korea, (2024).
12. J.H. Kwon, J.M. Heo, N.T. Nguyen, M.T. Tran, H.W. Lee, D.-K. Kim, Construction of ductile fracture locus depending on stress triaxiality of CHQ steel wires via unsupervised learning of acoustic emission signal, The Korean Society for Technology of Plasticity (KSTP) Spring Workshop, Seoul, Korea, (2024), in Korean.
13. D.-K. Kim, Size effect on plastic material flow of ultra-thin metallic bipolar plate for hydrogen fuel cell, Korean Society of Precision Engineering, Busan, Korea, (2023), in Korean.
14. J.H. Kwon, H.S. Joo, H.W. Lee, K.H. Lee, S.H. Park, Y.G. Jeong, D.-K. Kim, Evaluation of stress triaxiality-dependent formability for cold heading quality steel wire, The Korean Society for Technology of Plasticity (KSTP) Spring Workshop, Gangneung, Korea, (2023), in Korean.
15. J.H. Kwon, H.S. Joo, H.W. Lee, K.H. Lee, S.H. Park, Y.G. Jeong, D.-K. Kim, Evaluation of stress triaxiality-dependent formability for cold heading quality steel wire, The Korean Society for Technology of Plasticity (KSTP) Spring Workshop, Seoul, Korea, (2023), in Korean.
16. D.-K. Kim, In-situ neutron diffraction characterization of micromechanical properties of constituent phases in complex phase AHSS, 19th The International Symposium on Characterization of Metals and Nanostructured Materials by Neutron and X-ray Synchrotron Scattering (NeXS), Daegu, Korea (2023)
17. M.T. Tran, S.-K. Hwang, A.R. Jo, H.W. Lee, D.-K. Kim, simulation of micromechanical failure behavior in the ultra-thin steel sheet for fuel cell bipolar plate, International Conference on Precision Engineering and Sustainable Manufacturing (PRESM), Okinawa, Japan, (2023)
18. M.T. Tran, M.S. Pham, H. Kim, H. Chae, W. Woo, D.-K. Kim, Crystal plasticity modeling of micromechanical properties of constituent phases in 3rd generation complex phase AHSS, The 4th Asian Pacific Symposium on Technology Plasticity (ASTP), Gangneung, Korea, (2023)
19. J.H. Kwon, N.T. Nguyen, H.W. Lee, H.S. Joo, K.H. Lee, S.H. Park, D.W. Kim, Y.G. Jeong, D.-K. Kim, An unsupervised learning approach to assess acoustic emission signals for ductile fracture detection in bulk materials, Asian Materials Data Symposium (AMDS), Daegu, Korea, (2023).
20. D.-K. Kim, Virtual material testing by crystal plasticity finite element method: Grain size effect on the formability of ultra-thin metallic sheet, The Korean Society of Mechanical Engineers (KSME) Spring Workshop, Busan, Korea, (2022), in Korean.
21. M.T. Tran, S.-K. Hwang, H.W. Lee, D.-K. Kim, Micromechanical Deformation and Failure Behavior of Ultra-thin Steel Sheet: In-situ EBSD and Crystal Plasticity Simulation, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Changwon, Korea, (2022).
22. M.T. Tran, T.H. Nguyen, H.W. Lee, S.-K. Hwang, D.-K. Kim, Crystal plasticity Finite Element Simulation of Microstructural Deformation in Ultra-Thin Ferritic Steel Sheet, TMS, California, USA, (2022).
23. D.-K. Kim, Residual Stress Distribution in Additive Manufacturing: Neutron diffraction, Contour method, and Simulation, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Korea, (2021).
24. M.T. Tran, D.H. Lee, H. Wang, H.W. Lee, D.-K. Kim, Crystal plasticity-based forming limit prediction for ultra-thin bipolar plate for proton exchange membrane fuel cells, Materials Science & Technology (MS&T), Columbus, Ohio, USA, October, (2021).
25. Z. Shan, M.T. Tran, H. Wang, S.-K. Hwang, D.-K. Kim, Inherent strain method for residual stress prediction in ferritic-austenitic steel structure fabricated by directed energy deposition, Materials Science & Technology (MS&T), Columbus, Ohio, USA, October, (2021).
26. T.H. Nguyen, M.T. Tran, K.-H. Jung, H.W. Lee, S.-K. Hwang, D.-K. Kim, Cryogenic mechanical properties of CrCoNi medium entropy alloy produced by selective laser melting with hot isostatic pressing, Materials Science & Technology (MS&T), Columbus, Ohio, USA, October, (2021).
27. M.T. Tran, H.W. Lee, D.-K. Kim, Size Effect on Formability of Ultra-Thin Steel Sheet, International symposium on technology of plasticity, Busan, Korea, (2021).
28. D.H. Lee, M.T. Tran, H.W. Lee, D.-K. Kim, Design of multi-stage forming process of metal bipolar plate for PEM fuel cell, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Busan, Korea, (2021), in Korean.
29. S.-Y. Jung, D.H. Lee, S.K. Kim, Y.-J. Yum, D.-K. Kim, Study on mechanical behavior of non-flammable polymer materials, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Busan, Korea, (2021), in Korean.
30. S.-Y. Jung, D.H. Lee, H. Wu, Y.-J. Yum, D.-K. Kim, Evaluation of mechanical properties of flame-retardant polymer materials, The Korean Society of Mechanical Engineers (KSME) Fall Workshop, Busan, Korea, (2021), in Korean.
31. M.T. Tran, Z. Shan, H.W. Lee, D.-K. Kim, Study on effect of varying blank holding force on earing reduction in deep drawing with deep neural network, The Korean Society for Technology of Plasticity (KSTP) Spring Workshop, Yeosu, Korea, (2021).
32. D.H. Lee, M.T. Tran, H.W. Lee, D.-K. Kim, Optimization of multi-stage forming process of metal bipolar plate for PEM fuel cell by artificial intelligence, The Korean Society for Technology of Plasticity (KSTP) Spring Workshop, Yeosu, Korea, (2021), in Korean.
33. Z. Shan, M.T. Tran, S.K. Hwang, D.-K. Kim, Prediction of Residual Stress in Additively Manufactured Ferritic-austenitic Steel Structure using Inherent Strain Method, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Virtual, Korea, (2021).
34. T.H. Nguyen, M.T. Tran, W. Woo, H.W. Lee, S.H. Choi, D.-K. Kim, Mechanical properties and microstructure of additively manufactured CrCoNi medium entropy alloy at cryogenic temperature, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Virtual, Korea, (2021).
35. M.T. Tran, Z. Shan, H.W. Lee, D.-K. Kim, Earing reduction in deep drawing by varying blank holding force, 39th International Deep-Drawing Research Group (IDDRG) Conference, Virtual, Korea (2020).
36. D.-K. Kim, Finite element simulation of quasi-static ductile fracture behavior depending on crack-tip residual stress, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2019), in Korean.
37. D. H. Lee, S. J. Min, D. K. Kim, Finite element Simulation of forging process with local heating for manufacturing automotive ball stud, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2019), in Korean.
38. M.T. Tran, D.-K. Kim, Through-thickness Distribution of Subsurface Residual Stress Determined by A Combined Layer Removal Technique with X-ray Diffraction Method, The Korean Society of Mechanical Engineers (KSME) Spring Regional Workshop, Ulan, Korea, (2019), in Korean.
39. Y.S. Kim, H. Chae, W. Woo, D.-K. Kim, E-W. Huang, T. Kawasaki, S. Harjo, S.Y, Lee, Neutron diffraction characterization of 3D printed CoCrNi high entropy alloy at 298 K and 210 K, The 3rd Asia-Oceania Conference on Neutron Scattering (AOCNS) Taipei, Taiwan, (2019)
40. D.-K. Kim, Effect of the localized residual stress on the quasi-static ductile fracture, The 22nd International Conference on Advances in Materials and Processing Technology, Taipei, Taiwan, (2019)
41. D.-K. Kim, W. Woo, H. Wang, S.Y. Lee, Simulation of ductile fracture considering the effect of residual stress for structural steel and aluminum alloys, The 14th Asia-Pacific Symposium on Engineering Plasticity and Its Applications, Jeju, Korea, (2018)
42. D.-K. Kim, W. Woo, Neutron diffraction measurement of residual stress in high melting point metal 3D printing, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, (2018), in Korean.
43. D.-K. Kim, W. Woo, E.Y. Kim, S.H. Choi, Upsetting of functionally-graded material produced by direct energy deposition, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Jeju, Korea, (2018), in Korean.
44. W. Woo, D.-K. Kim, H.B. Chae, M.G. Hong, S.Y. Lee, In situ neutron diffraction studies on deformation behavior and stacking fault analysis in additive manufactured CrCoNi medium entropy alloy, International conference on High-Entropy Materials (ICHEM), Jeju, Korea, (2018)
45. D.-K. Kim, W. Woo, E.Y. Kim, S.H. Choi, Plastic deformation anisotropy of functionally graded material produced by additive manufacturing, The International Conference on Plasticity, Damage & Fracture, Puerto Rico, USA, (2018).
46. D.-K. Kim, W. Woo, Y.H. Heo, S.H. Choi, Micromechanical elasto-plastic deformation of additive-manufactured AlSi10Mg alloy, International conference on neutron scattering (ICNS), Daejeon, Korea, (2017).
47. D.-K. Kim, W. Woo, S.Y. Lee, Neutron diffraction measurement of residual stress in 3d printing functionally-graded material, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Changwon, Korea, (2017), in Korean.
48. H. Wang, D.-K. Kim, W. Woo, G.B. An, S.Y. Lee, Influence of residual stresses on fracture resistance studied by neutron diffraction and finite element analysis, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Changwon, Korea, (2017), in Korean.
49. D.-K. Kim, W. Woo, Y.H. Heo, S.H. Choi, In situ neutron diffraction study on stress-strain partitioning of additive-manufactured AlSi10Mg alloy, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Daegu, Korea, (2017).
50. D.-K. Kim, W. Woo, J.H. Hwang, S.H. Choi, Micromechanical deformation and failure behaviors in AlSi10Mg alloy processed by selective laser melting, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Busan, Korea, (2016).
51. D.-K. Kim, W. Woo, E.Y. Kim, S.H. Choi, Crystal plasticity finite element modeling of micromechanical stress-strain partitioning and failure mechanism, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2016), in Korean.
52. D.-K. Kim, Neutron diffraction study on the mechanics of industrial metallic materials, KAERI-KIST joint symposium, Seoul, Korea, (2016), in Korean.
53. D.-K. Kim, W. Woo, J.H. Hwang, K. An, S.H. Choi, In situ neutron diffraction study on strain partitioning in AlSi10Mg fabricated by selective laser melting, HANARO symposium, Daejeon, Korea, (2016), in Korean.
54. D.-K. Kim, J.H. Han, W. Woo, G.B. An, Effect of residual stress on the fracture toughness: in-situ neutron diffraction and simulation, The Korean Society of Mechanical Engineers (KSME) Spring Workshop, Jeju, Korea, (2016), in Korean.
55. D.-K. Kim, E.Y. Kim, W. Woo, S.H. Choi, Crystal plasticity finite element modeling of micromechanical failure behaviors of dual phase steel, The International Conference on Plasticity, Damage & Fracture, Hawaii, USA, (2016).
56. J.H. Hwang, E.Y. Kim, D.-K. Kim, W. Woo, D.I. Kim, Y.U. Heo, S.H. Choi, Effect of microstructure on micromechanical deformation and failure behaviors of AlSi10Mg alloy fabricated by selective laser melting during uniaxial tension, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Busan, Korea, (2016), in Korean.
57. H. Wang, D.-K. Kim, W. Woo, G.B. An, H.B. Choi, S.Y. Lee, Microstructure and Mechanical Property of Multi-Pass Low Transformation Temperature Welds, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Busan, Korea, (2016).
58. H. Wang, D.-K. Kim, W. Woo, G.B. An, H.B. Choi, S.Y. Lee, Studies on localized material properties in low transformation temperature welds, 15th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Taipei, Taiwan, (2016).
59. B.K. Oh, D.-K. Kim, Residual stress prediction of tubular shaft for automotive application, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Kyungju, Korea, (2016), in Korean.
60. E.Y. Kim, W. Woo, D.-K. Kim, J.H. Kwak, S.H. Choi, Estimation of microscopic hardening parameter for constituent phases in lightweight duplex steel, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Kyungju, Korea, (2016), in Korean.
61. W. Woo, G.B. An, D.-K. Kim, S.Y. Lee, J.W. Park, Residual stress measurement in dissimilar thick plate welds: neutron diffraction, deep hole drilling, and contour method, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Kyungju, Korea, (2016), in Korean.
62. D.-K. Kim, W. Woo, W.W. Park, Y.T. Im, A.D. Rollett, Microstructure-based modeling of texture evolution in primary recrystallized cold-rolled IF steels, International Symposium on Novel and Nano Materials (ISNNM), Budapest, Hungary, (2015).
63. D.-K. Kim, W. Woo, J.H. Han, G.B. An, Evaluation of Fracture Toughness under Consideration of Residual Stresses, 14th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Jeju, Korea, (2015).
64. J.H. Han, D.-K. Kim, Evaluation of fracture toughness considering crack propagation in bicrystalline graphene via molecular dynamics simulations, 14th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Jeju, Korea, (2015).
65. W. Woo, D.-K. Kim, E.W. Huang, J.W. Yeh, Pseudo-creep deformation behavior study on a CoCrFeMnNi high entropy alloy using neutron diffraction, 14th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Jeju, Korea, (2015).
66. D.-K. Kim, W. Woo, G.B. An, In-Situ Neutron Diffraction Study on the Effect of Localized Residual Stress on the Fracture, The Korean Society of Mechanical Engineers (KSME) Spring Workshop, Jeju, Korea, (2015), in Korean.
67. D.-K. Kim, W. Woo, Y.H. Kang, Development of Contour Method for Measurement of Residual Stress Distribution in a Bulk Structural Member, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Changwon, Korea, (2015), in Korean.
68. W. Woo, D.-K. Kim, G.B. An, S.H. Choi, Neutron diffraction method for residual stress measurement and materials deformation study, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Changwon, Korea, (2015), in Korean.
69. D.-K. Kim, W. Woo, G.B. An, The Effect of Residual Stress on the Fracture Toughness: In-situ Neutron Diffraction and Finite Element Analysis, The Korean Society for Technology of Plasticity (KSTP) Spring Workshop, Busan, Korea, (2015), in Korean.
70. D.-K. Kim, W. Woo, W.W. Park, Y.T. Im, Microstructure-based coupled simulation of texture evolution during deformation and recrystallization, The International Conference on Plasticity, Damage & Fracture, Montego, Jamaica, (2015).
71. D.-K. Kim, W. Woo, G.B. An, Neutron diffraction measurement of stress field at the crack tip, HANARO symposium, Daejeon, Korea, (2015), in Korean.
72. D.-K. Kim, W.W. Park, J.M. Kim, Y.T. Im, C. Woo, Through-process simulation of microstructure and texture evolution in IF steel based on microstructure-based modeling approach, Materials Science and Technology, MS&T, Pittsburgh, USA, (2014).
73. D.-K. Kim, J.M. Kim, W.W. Park, Y.T. Im, Y.S. Lee, 3-D microstructure-based simulation of inhomogeneous plastic deformation and crystallographic orientation distribution of IF steel, International Symposium on Novel and Nano Materials (ISNNM), Cracow, Poland, (2014).
74. D.-K. Kim, W.W. Park, J.M. Kim, Y.T. Im, C. W, Multiscale simulation by crystal plasticity finite element method and cellular automata for prediction of microstructure and texture evolution, HANARO symposium, Daejeon, Korea, (2014), in Korean.
75. D.-K. Kim, J.M. Kim, W.W. Park, Y.T. Im, C. Woo, Microstructure-based Simulation of Inhomogeneous Plastic Deformation and Crystallographic Orientation Distribution in Ferritic Steel, The Korean Society of Mechanical Engineers (KSME) Fall Workshop, Jeju, Korea, (2014), in Korean.
76. D.-K. Kim, J.M. Kim, W.W. Park, Y.T. Im, C. W, H.W. Lee, 3-D simulation of microstructure and texture evolution of IF steel based on crystal plasticity finite element method, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Daegu, Korea, (2014), in Korean.
77. D.-K. Kim, Multiscale simulation of microstructure and texture evolution during deformation and recrystallization, KAERI-KIST joint symposium, Seoul, Korea, (2014), in Korean.
78. Y.G. Yoo, D.-K. Kim,W.C. Woo, S.Y. Lee, Contour method for measurement of residual stress in the thick plate welds, The Korean Welding and Joining Society (KWJS), Kangwon, Korea, (2014), in Korean.
79. N. Pholdee, S. Bureerat, W.W. Park, D.-K. Kim, Y.T. Im, H.C. Kwon, M.S. Chun, Optimization of flatness of a strip during coiling process based on evolutionary algorithms, International Symposium on Green Manufacturing and Applications, Busan, Korea, (2014).
80. D.-K. Kim, J.M. Kim, W.W. Park, Y.T. Im, Y.S. Lee, Prediction of microstructure and texture evolution of IF steel based on crystal plasticity finite element method, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2013), pp. 229-232, in Korean.
81. K.H. Jung, D.-K. Kim, Y.T. Im, Y.S. Lee, Prediction of deformation induced anisotropy based on three-dimensional crystal plasticity finite element method, The International Conference on Plasticity, Damage & Fracture, Nassau, Bahamas, pp. 13-15, (2013).
82. N. Pholdee, W.W. Park, D.-K. Kim, Y.T. Im, S. Bureerat, H.C. Kwon, M.S. Chun, Hybrid scheme of optimization based on evolutionary algorithms for strip coiling process, The Korean Society of Mechanical Engineers (KSME) Spring Workshop, Daejeon, Korea, (2013).
83. W.W. Park, D.-K. Kim, Y.T. Im, H.C. Kwon, M.S. Cheon, The effect of processing parameters on flatness of the strip during coiling process by elastic stress analysis, The 16th International Conference on Advances in Materials and Processing Technologies (AMPT), Taipei, Taiwan, (2013).
84. N. Pholdee, W.W. Park, D.-K. Kim, Y.T. Im, S. Bureerat, H.C. Kwon, M.S. Chun, Optimization of a strip coiling process using evolutionary algorithms, The 16th International Conference on Advances in Materials and Processing Technologies (AMPT), Taipei, Taiwan, (2013).
85. D.-K. Kim, K.H. Jung, W.W. Park, Y.T. Im, Y.S. Lee, Numerical study of the effect of deformation history on texture evolution during equal channel angular pressing, The 15th International Conference on Advances in Materials and Processing Technologies (AMPT), Wollongong, Australia, (2012).
86. W.W. Park, D.-K. Kim, Y.T. Im, H.C. Kwon, D. G. Choi, M. S. Chun, Stress analysis based on elastic model during strip coiling process, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Gyeongju, Korea, (2012), pp. 273-276, in Korean.
87. Y.T. Im, J.W. Lee, S.K. Hwang, D.-K. Kim, H.M. Baek, W.W. Park, H.S. Joo, J.M. Kim, I.H. Son, C.M. Bae, Bolt manufacturing of fine-grained materials, The 45th International Cold Forging Group (ICFG), Nagoya, Japan, (2012), pp. 142-149.
88. Y.T. Im, S.K. Hwang, D.-K. Kim, H.M. Baek, W.Y. Park, J.W. Lee, H.S. Joo, J.M. Kim, Sustainability issues of research and development of forging, The 20st International Scientific Conference on Achievements in Materials and Manufacturing Engineering, Cracow, Poland, (2012).
89. D.-K. Kim, K.H. Jung, H.W. Lee, Y.T. Im, Cellular automata simulation of textural evolution during primary static recrystallization of IF steel, The 16th International Conference on the Textures of Materials (ICOTOM), Mumbai, India, (2011), pp. 615-618.
90. K.H. Jung, D.-K. Kim, Y.T. Im and Y.S. Lee, Finite element analysis of texture evolution during rolling of FCC polycrystalline metal based on crystal plasticity, The 14th International Conference on Advances in Materials and Processing Technologies (AMPT), Istanbul, Turkey, (2011).
91. S.K. Hwang, Y.G. Jin, H.M. Baek, D.-K. Kim, I.H. Son, Y.T. Im, A continuous hybrid process for manufacturing high-strength low carbon steel, The 10th International Conference on Technology of Plasticity (ICTP), Aachen, Germany, (2011), pp. 314-319.
92. Y.S. Oh, K.H. Jung, D.-K. Kim, Y.T. Im, I.H. Son, D.L, Lee, Effect of initial microstructure on mechanical properties of high carbon steel in warm, The 10th Global Congress on Manufacturing and Management (GCMM), Bangkok, Thailand, (2010), pp. 247-252.
93. D.-K. Kim, H.W. Lee, K.H. Jung, Y.T. Im, Cellular automata modeling of primary recrystallization during annealing of AA1050, The 11th Asian Symposium on Precision Forging (ASPF), Kyoto, Japan, (2010), pp. 66-71.
94. Y.T. Im, K.H. Jung, H.C. Lee, D.-K. Kim, S.H. Kang, Tip test of friction measurement for cold forging, The 4th International Conference on Tribology in Manufacturing Processes (ICTMP), Niece, France, (2010), pp. 507-516.
95. Y.T. Im, K.H. Jung, H.C. Lee, D.-K. Kim, Y.S. Oh, Tip test of friction measurement for cold forging, The 11th Asian Symposium on Precision Forging (ASPF), Kyoto, Japan, (2010), pp. 76-83.
96. D.-K. Kim, H.W. Lee, K.H. Jung, Y.T. Im, Cellular automata modeling of primary recrystallization during annealing of AA1050, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2010), pp. 100-103, in Korean.
97. Y.S. Oh, I.H. Son, K.H. Jung, D.-K. Kim, D.L Lee, Y.T. Im, Effect of initial microstructure on mechanical properties of high carbon steel in warm caliber rolling, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2010), pp. 96-99, in Korean.
98. Y.T. Im, K.H. Jung, S.H. Kang, H.C. Lee, D.-K. Kim, Friction measurement by tip test in cold forging process, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, 2010, pp. 238-241, in Korean.
99. D.-K. Kim, K.H. Jung, S.H. Kang, Y.T. Im, Prediction of phase transformation and mechanical property of carbon steel in quenching based on finite element analysis, The Korean Society for Technology of Plasticity (KSTP) Fall Workshop, Gangneung, Korea, 2009, pp. 173-176, in Korean.