Publications

International Journal Papers

28. H. Wang, W. Woo, D.-K. Kim*, Effect of Locallized Residual Stress on the Fracture Toughness: In-situ Neutron Diffraction and Finite Element Analysis, In preparation (Corresponding author)

27. H.W. Lee, K.-H. Jung, S.-K. Hwang, D.-K. Kim*, Microstructure and mechanical anisotropy of CoCrW alloy processed by selective laser melting, Submitted to Materials Science and Engineering: A (Corresponding author, SCI IF 3.094, JCR TOP 8.67%)

26. W. Woo, D.-K. Kim*, E. J. Kingston, V. Luzin, F. Salvemini, M. R. Hill, Through-thickness distributions of residual stresses in functionally graded additive manufactured components: a neutron, contour, and hole drilling coupled study, Materials Science and Engineering A, Under review (Corresponding author, SCI IF 3.094, JCR TOP 8.67%)

2019

25. D.-K. Kim, W. Woo, E.-Y. Kim, and S.H. Choi, Microstructure and mechanical characteristics of multi-layered material of 316L stainless steel/ferritic steel produced by direct energy deposition, Journal of Alloys and Compounds 774, (2019) pp. 896-907 (First author, SCI IF 3.779, JCR TOP 5.33%)

2018

24. H. Wang, W. Woo, D. -K. Kim, V. Em, S.Y. Lee, Effect of chemical dilution and the number of weld layers on residual stresses in a multi-pass low-transformation-temperature weld, Materials and Design 160, (2018) pp. 384-394 (SCIE IF 4.525, JCR TOP 18.5%)

23. H. Wang, W. Woo, D. -K. Kim, V. Em, G.B. An, S.Y. Lee, Effect of tailored martensitic transformation in a thick weld: residual stresses mitigation, heterogeneous microstructure, and mechanical properties, Materials Characterization, 144, (2018) pp. 345-355. (SCIE IF 2.892, JCR TOP 7.6%)

2017

22. Y. Wan, W. Jiang, J. Li, G. Sun, D.-K. Kim, W. Woo, S.Tung, Weld residual stresses in a thick plate considering back chipping: Neutron diffraction, contour method and finite element simulation study, Materials Science and Engineering A, 699 (2017) pp. 62-70. (SCI IF 3.094, JCR TOP 8.67%)

21. D.-K. Kim, J.H. Hwang, E.Y. Kim, Y.U. Huh, W. Woo, S.H. Choi, Evaluation of stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using in-situ neutron diffraction and crystal plasticity FEM, Journal of Alloys and Compounds, 714 (2017) pp. 687-697. (First author, SCI IF 3.779, JCR TOP 5.33%)

20. D.-K. Kim, W. Woo, W.W. Park, Y.T. Im, A.D. Rollett, Mesoscopic modeling of texture formation during recrystallization considering stored energy decomposition, Computational Materials Science, 129 (2017) pp. 55-65. (First author, SCI IF 2.292, JCR TOP 38%)

19. D.-K. Kim, E.Y. Kim, J. Han, W. Woo, S.H. Choi, Effect of microstructural factors on void formation by ferrite/martensite interface decohesion in DP980 steel under uniaxial tension, International Journal of Plasticity, 94 (2017) pp. 3-23. (First author, SCI IF 5.702, JCR TOP 1%)

18. J. Han, D. Sohn, W. Woo, D.-K. Kim*, Molecular dynamics study of fracture toughness and trans-intergranular transition in bi-crystalline graphene, Computational Materials Science, 129 (2017) pp. 323-331. (Corresponding author, SCI IF 2.292, JCR TOP 38%)

2016

17. D.-K. Kim, W. Woo, J.H. Hwang, K. An, S.H. Choi, Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction, Journal of Alloys and Compounds, 686 (2016) pp. 281-286. (First author, SCI IF 3.779, JCR TOP 5.33%)

16. J. Han, S. Ryu, D.-K. Kim, W. Woo, D. Sohn, Effect of interlayer sliding on the estimation of elastic modulus of multilayer graphene in nanoindentation simulation, Europhysics Letters, 114 (2016) 68001. (SCI IF 1.957, JCR TOP 28%)

2015

15. D.-K. Kim, J.M. Kim, W.W. Park, H.W. Lee, Y.T. Im, Y.S. Lee, Three-dimensional crystal plasticity finite element analysis of microstructure and texture evolution during channel die compression of IF steel, Computational Materials Science, 100 (2015) pp. 52-60. (First author, SCI IF 2.292, JCR TOP 38%)

14. N. Pholdee, S. Bureerat, W.W. Park, D.-K. Kim, Y.T. Im, H.C. Kwon, M.S. Chun, Optimization of Flatness of a Strip during Coiling Process based on Evolutionary Algorithms, International Journal of Precision Engineering and Manufacturing, 16 (2015) pp. 1493-1499. (SCIE IF 1.497, JCR TOP 48%)

13. N. Pholdee, W.W. Park, D.-K. Kim, Y.T. Im, S. Bureerat, H.C. Kwon, M.S. Chun, Efficient hybrid evolutionary algorithm for optimization of a strip coiling process, Engineering Optimization, 47 (2015) pp. 521-532. (SCIE IF 1.728, JCR TOP 30%)

2014

12. D.-K. Kim, K.H. Jung, W.W. Park, Y.T. Im, Y.S. Lee, Numerical study of the effect of deformation history on texture evolution during equal channel angular pressing, Computational Materials Science, 81 (2014) pp. 68-78. (First author, SCI IF 2.292, JCR TOP 38%)

2013

11. D.-K. Kim, H.W. Lee, K.H. Jung, Y.T. Im, Mesoscopic modeling of primary recrystallization of AA1050 with curvature-driven interface migration effect, Materials Transaction, 54 (2013) pp. 81-89. (First author, SCI IF 0.713, JCR TOP 64%)

10. K.H. Jung, D.-K. Kim, Y.T. Im, Y.S. Lee, Crystal plasticity finite element analysis of texture evolution during rolling of fcc polycrystalline metal, Materials Transaction, 54 (2013) pp. 769-775. (SCI IF 0.713, JCR TOP 64%)

9. D.-K. Kim, W.W. Park, H.W. Lee, S.H. Kang, Y.T. Im, Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction, Journal of Microscopy, 252 (2013) pp. 204-216. (First author, SCI IF 1.692, JCR TOP 45%)

8. K.H. Jung, D.-K. Kim, Y.T. Im, Y.S. Lee, Prediction of the effects of hardening and texture heterogeneities by finite element analysis based on the Taylor model, International Journal of Plasticity, 42 (2013) pp.120-140. (SCI IF 5.702, JCR TOP 1%)

7. W. W. Park, D.-K. Kim, Y. T. Im, H. C. Kwon, and M. S. Chun, The effect of processing parameters on elastic deformation of the coil during the thin-strip coiling process, Metals and Materials International, 20 (2013), pp. 719-726. (SCI IF 1.889, JCR TOP 20%)

2012

6. D.-K. Kim, K.H. Jung, H.W. Lee, Y.T. Im, Cellular automata simulation of textural evolution during primary static recrystallization of IF steel, Materials Science Forum, (2012) pp. 615-618.

5. K.H. Jung, H.C. Lee, D.-K. Kim, S.H. Kang, Y.T. Im, Friction measurement by the tip test for cold forging, Wear, 286-287 (2012) pp. 19-26. (SCI IF 2.531, JCR TOP 21%)

4. Y.T. Im, S.K. Hwang, D.-K. Kim, H.M. Baek, W.Y. Park, J.W. Lee, H.S. Joo, J.M. Kim, Sustainability issues of research and development of forging, Journal of Achievements in Materials and Manufacturing Engineering, 54 (2012) pp. 147-158.

2011

3. Y.S. Oh, I.H. Son, K.H. Jung, D.-K. Kim, D.L. Lee, Y.T. Im, Effect of initial microstructure on mechanical properties in warm caliber rolling of high carbon steel, Materials Science and Engineering A, 528 (2011) pp. 5833-5839. (SCI IF 3.094, JCR TOP 8.67%)

2. S.K. Hwang, Y.G. Jin, H.M. Baek, D.-K. Kim, I.H. Son, Y.T. Im, A continuous hybrid process for manufacturing high-strength low carbon steel, Steel Research International, special issue (2011) pp. 314-319.

2008

1. P. Chauviere, K.H. Jung, D.-K. Kim, H.C. Lee, S.H. Kang, Y.T. Im, Experimental study of miniaturized tip test, Journal of Mechanical Science Technology, 22 (2008) pp. 924-930. (SCI IF 1.194, JCR TOP 59%)

Domestic Journal Papers

1. D.K. Kim, W. Woo, Y.H. Kang, Characterization of residual stress distribution of thick steel weld by contour method, Journal of Welding and Joining, 33 (2015) pp. 24-29.

2. W. Woo, D.K. Kim, G.B. An, Residual stress measurements using neutron diffraction, Journal of Welding and Joining, 33 (2015) pp. 30-34.

3. D.K. Kim, J.M. Kim, W.W. Park, Y.T. Im, Y.S. Lee, Prediction of deformation texture in bcc metals based on rate-dependent crystal plasticity finite element analysis, Transactions of Materials Processing, 23 (2014) pp.231-237.

4. K.H. Jung, D.K. Kim, Y.T. Im, Y.S. Lee, Prediction of deformation texture based on three-dimensional crystal plasticity finite element method, Transactions of Materials Processing, 21 (2012) pp.252-257.

5. D.K. Kim, K.H. Jung, S.H. Kang, Y.T. Im, A study on temperature measurement for quenching of carbon steel, Transactions of Materials Processing, 19 (2010) pp. 25-31.

Conference Presentations/Proceedings

1. D.K. Kim, W.C. Woo, E.Y. Kim, S.H. Choi, Plastic deformation anisotropy of functionally graded material produced by additive manufacturing, International Journal of Plasticity (IJP) conference, Puerto Rico, USA, (2018).

2. D.K. Kim, W.C. Woo, Y.H. Heo, S.H. Choi, Micromechanical elasto-plastic deformation of additive-manufactured AlSi10Mg alloy, International conference on neutron scattering (ICNS), Daejeon, Korea, (2017).

3. D.K. Kim, W.C. Woo, S.Y. Lee, Neutron diffraction measurement of residual stress in 3d printing functionally-graded material, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Changwon, Korea, (2017), in Korean.

4. H. Wang, D.K. Kim, W.C. Woo, G.B. An, S.Y. Lee, Influence of residual stresses on fracture resistance studied by neutron diffraction and finite element analysis, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Changwon, Korea, (2017), in Korean.

5. D.K. Kim, W.C. Woo, Y.H. Heo, S.H. Choi, In situ neutron diffraction study on stress-strain partitioning of additive-manufactured AlSi10Mg alloy, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Daegu, Korea, (2017).

6. D.K. Kim, W.C. Woo, J.H. Hwang, S.H. Choi, Micromechanical deformation and failure behaviors in AlSi10Mg alloy processed by selective laser melting, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Busan, Korea, (2016).

7. D.K. Kim, W.C. Woo, E.Y. Kim, S.H. Choi, Crystal plasticity finite element modeling of micromechanical stress-strain partitioning and failure mechanism, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2016), in Korean.

8. D.K. Kim, Neutron diffraction study on the mechanics of industrial metallic materials, KAERI-KIST joint symposium, Seoul, Korea, (2016), in Korean.

9. D.K. Kim, W.C. Woo, J.H. Hwang, K. An, S.H. Choi, In situ neutron diffraction study on strain partitioning in AlSi10Mg fabricated by selective laser melting, HANARO symposium, Daejeon, Korea, (2016), in Korean.

10. D.K. Kim, J.H. Han, W.C. Woo, G.B. An, Effect of residual stress on the fracture toughness: in-situ neutron diffraction and simulation, The Korean Society of Mechanical Engineers (KSME) Spring Workshop, Jeju, Korea, (2016), in Korean.

11. D.K. Kim, E.Y. Kim, W.C. Woo, S.H. Choi, Crystal plasticity finite element modeling of micromechanical failure behaviors of dual phase steel, International Journal of Plasticity (IJP) conference, Hawaii, USA, (2016).

12. J.H. Hwang, E.Y. Kim, D.K. Kim, W.C. Woo, D.I. Kim, Y.U. Heo, S.H. Choi, Effect of microstructure on micromechanical deformation and failure behaviors of AlSi10Mg alloy fabricated by selective laser melting during uniaxial tension, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Busan, Korea, (2016), in Korean.

13. H. Wang, D.K. Kim, W.C. Woo, G.B. An, H.B. Choi, S.Y. Lee, Microstructure and Mechanical Property of Multi-Pass Low Transformation Temperature Welds, The Korean Institute of Metals and Materials (KIMM) Fall Workshop, Busan, Korea, (2016).

14. H. Wang, D.K. Kim, W.C. Woo, G.B. An, H.B. Choi, S.Y. Lee, Studies on localized material properties in low transformation temperature welds, 15th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Taipei, Taiwan, (2016).

15. B.K. Oh, D.K. Kim, Residual stress prediction of tubular shaft for automotive application, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Kyungju, Korea, (2016), in Korean.

16. E.Y. Kim, W.C. Woo, D.K. Kim, J.H. Kwak, S.H. Choi, Estimation of microscopic hardening parameter for constituent phases in lightweight duplex steel, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Kyungju, Korea, (2016), in Korean.

17. W.C. Woo, G.B. An, D.K. Kim, S.Y. Lee, J.W. Park, Residual stress measurement in dissimilar thick plate welds: neutron diffraction, deep hole drilling, and contour method, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Kyungju, Korea, (2016), in Korean.

18. D.K. Kim, W.C. Woo, W.W. Park, Y.T. Im, A.D. Rollett, Microstructure-based modeling of texture evolution in primary recrystallized cold-rolled IF steels, International Symposium on Novel and Nano Materials (ISNNM), Budapest, Hungary, (2015).

19. D.K. Kim, W.C. Woo, J.H. Han, G.B. An, Evaluation of Fracture Toughness under Consideration of Residual Stresses, 14th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Jeju, Korea, (2015).

20. J.H. Han, D.K. Kim, Evaluation of fracture toughness considering crack propagation in bicrystalline graphene via molecular dynamics simulations, 14th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Jeju, Korea, (2015).

21. W.C. Woo, D.K. Kim, E.W. Huang, J.W. Yeh, Pseudo-creep deformation behavior study on a CoCrFeMnNi high entropy alloy using neutron diffraction, 14th International Union of Materials Research Societies (IURMS), International Conference on Advanced Materials, Jeju, Korea, (2015).

22. D.K. Kim, W.C. Woo, G.B. An, In-Situ Neutron Diffraction Study on the Effect of Localized Residual Stress on the Fracture, The Korean Society of Mechanical Engineers (KSME) Spring Workshop, Jeju, Korea, (2015), in Korean.

23. D.K. Kim, W.C. Woo, Y.H. Kang, Development of Contour Method for Measurement of Residual Stress Distribution in a Bulk Structural Member, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Changwon, Korea, (2015), in Korean.

24. W.C. Woo, D.K. Kim, G.B. An, S.H. Choi, Neutron diffraction method for residual stress measurement and materials deformation study, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Changwon, Korea, (2015), in Korean.

25. D.K. Kim, W.C. Woo, G.B. An, The Effect of Residual Stress on the Fracture Toughness: In-situ Neutron Diffraction and Finite Element Analysis, The Korean Society For Technology of Plasticity (KSTP) Spring Workshop, Busan, Korea, (2015), in Korean.

26. D.K. Kim, W.C Woo, W.W. Park, Y.T. Im, Microstructure-based coupled simulation of texture evolution during deformation and recrystallization, International Journal of Plasticity (IJP) conference, Montego, Jamaica, (2015).

27. D.K. Kim, W.C. Woo, G.B. An, Neutron diffraction measurement of stress field at the crack tip, HANARO symposium, Daejeon, Korea, (2015), in Korean.

28. D.K. Kim, W.W. Park, J.M. Kim, Y.T. Im, C. Woo, Through-process simulation of microstructure and texture evolution in IF steel based on microstructure-based modeling approach, Materials Science and Technology, MS&T, Pittsburgh, USA, (2014).

29. D.K. Kim, J.M. Kim, W.W. Park, Y.T. Im, Y.S. Lee, 3-D microstructure-based simulation of inhomogeneous plastic deformation and crystallographic orientation distribution of IF steel, International Symposium on Novel and Nano Materials (ISNNM), Cracow, Poland, (2014).

30. D.K. Kim, W.W. Park, J.M. Kim, Y.T. Im, C. W, Multiscale simulation by crystal plasticity finite element method and cellular automata for prediction of microstructure and texture evolution, HANARO symposium, Daejeon, Korea, (2014), in Korean.

31. D.K. Kim, J.M. Kim, W.W. Park, Y.T. Im, C. Woo, Microstructure-based Simulation of Inhomogeneous Plastic Deformation and Crystallographic Orientation Distribution in Ferritic Steel, The Korean Society of Mechanical Engineers (KSME) Fall Workshop, Jeju, Korea, (2014), in Korean.

32. D.K. Kim, J.M. Kim, W.W. Park, Y.T. Im, C. W, H.W. Lee, 3-D simulation of microstructure and texture evolution of IF steel based on crystal plasticity finite element method, The Korean Institute of Metals and Materials (KIMM) Spring Workshop, Daegu, Korea, (2014), in Korean.

33. D.K. Kim, Multiscale simulation of microstructure and texture evolution during deformation and recrystallization, KAERI-KIST joint symposium, Seoul, Korea, (2014), in Korean.

34. Y.G. Yoo, D.K. Kim,W.C. Woo, S.Y. Lee, Contour method for measurement of residual stress in the thick plate welds, The Korean Welding and Joining Society (KWJS), Kangwon, Korea, (2014), in Korean.

35. N. Pholdee, S. Bureerat, W.W. Park, D.K. Kim, Y.T. Im, H.C. Kwon, M.S. Chun, Optimization of flatness of a strip during coiling process based on evolutionary algorithms, International Symposium on Green Manufacturing and Applications, Busan, Korea, (2014).

36. D.K. Kim, J.M. Kim, W.W. Park, Y.T. Im, Y.S. Lee, Prediction of microstructure and texture evolution of IF steel based on crystal plasticity finite element method, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2013), pp. 229-232, in Korean.

37. K.H. Jung, D.K. Kim, Y.T. Im, Y.S. Lee, Prediction of deformation induced anisotropy based on three-dimensional crystal plasticity finite element method, International Journal of Plasticity (IJP) conference, Nassau, Bahamas, pp. 13-15, (2013).

38. N. Pholdee, W.W. Park, D.K. Kim, Y.T. Im, S. Bureerat, H.C. Kwon, M.S. Chun, Hybrid scheme of optimization based on evolutionary algorithms for strip coiling process, The Korean Society of Mechanical Engineers (KSME) Spring Workshop, Daejeon, Korea, (2013).

39. W.W. Park, D.K. Kim, Y.T. Im, H.C. Kwon, M.S. Cheon, The effect of processing parameters on flatness of the strip during coiling process by elastic stress analysis, The 16th International Conference on Advances in Materials and Processing Technologies (AMPT), Taipei, Taiwan, (2013).

40. N. Pholdee, W.W. Park, D.K. Kim, Y.T. Im, S. Bureerat, H.C. Kwon, M.S. Chun, Optimization of a strip coiling process using evolutionary algorithms, The 16th International Conference on Advances in Materials and Processing Technologies (AMPT), Taipei, Taiwan, (2013).

41. D.K. Kim, K.H. Jung, W.W. Park, Y.T. Im, Y.S. Lee, Numerical study of the effect of deformation history on texture evolution during equal channel angular pressing, The 15th International Conference on Advances in Materials and Processing Technologies (AMPT), Wollongong, Australia, (2012).

42. W.W. Park, D.K. Kim, Y.T. Im, H.C. Kwon, D. G. Choi, M. S. Chun, Stress analysis based on elastic model during strip coiling process, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Gyeongju, Korea, (2012), pp. 273-276, in Korean.

43. Y.T. Im, J.W. Lee, S.K. Hwang, D.K. Kim, H.M. Baek, W.W. Park, H.S. Joo, J.M. Kim, I.H. Son, C.M. Bae, Bolt manufacturing of fine-grained materials, The 45th International Cold Forging Group (ICFG), Nagoya, Japan, (2012), pp. 142-149.

44. Y.T. Im, S.K. Hwang, D.K. Kim, H.M. Baek, W.Y. Park, J.W. Lee, H.S. Joo, J.M. Kim, Sustainability issues of research and development of forging, The 20st International Scientific Conference on Achievements in Materials and Manufacturing Engineering, Cracow, Poland, (2012).

45. D.K. Kim, K.H. Jung, H.W. Lee, Y.T. Im, Cellular automata simulation of textural evolution during primary static recrystallization of IF steel, The 16th International Conference on the Textures of Materials (ICOTOM), Mumbai, India, (2011), pp. 615-618.

46. K.H. Jung, D.K. Kim, Y.T. Im and Y.S. Lee, Finite element analysis of texture evolution during rolling of FCC polycrystalline metal based on crystal plasticity, The 14th International Conference on Advances in Materials and Processing Technologies (AMPT), Istanbul, Turkey, (2011).

47. S.K. Hwang, Y.G. Jin, H.M. Baek, D.K. Kim, I.H. Son, Y.T. Im, A continuous hybrid process for manufacturing high-strength low carbon steel, The 10th International Conference on Technology of Plasticity (ICTP), Aachen, Germany, (2011), pp. 314-319.

48. Y.S. Oh, K.H. Jung, D.K. Kim, Y.T. Im, I.H. Son, D.L, Lee, Effect of initial microstructure on mechanical properties of high carbon steel in warm, The 10th Global Congress on Manufacturing and Management (GCMM), Bangkok, Thailand, (2010), pp. 247-252.

49. D.K. Kim, H.W. Lee, K.H. Jung, Y.T. Im, Cellular automata modeling of primary recrystallization during annealing of AA1050, The 11th Asian Symposium on Precision Forging (ASPF), Kyoto, Japan, (2010), pp. 66-71.

50. Y.T. Im, K.H. Jung, H.C. Lee, D.K. Kim, S.H. Kang, Tip test of friction measurement for cold forging, The 4th International Conference on Tribology in Manufacturing Processes (ICTMP), Niece, France, (2010), pp. 507-516.

51. Y.T. Im, K.H. Jung, H.C. Lee, D.K. Kim, Y.S. Oh, Tip test of friction measurement for cold forging, The 11th Asian Symposium on Precision Forging (ASPF), Kyoto, Japan, (2010), pp. 76-83.

52. D.K. Kim, H.W. Lee, K.H. Jung, Y.T. Im, Cellular automata modeling of primary recrystallization during annealing of AA1050, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2010), pp. 100-103, in Korean.

53. Y.S. Oh, I.H. Son, K.H. Jung, D.K. Kim, D.L Lee, Y.T. Im, Effect of initial microstructure on mechanical properties of high carbon steel in warm caliber rolling, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, (2010), pp. 96-99, in Korean.

54. Y.T. Im, K.H. Jung, S.H. Kang, H.C. Lee, D.K. Kim, Friction measurement by tip test in cold forging process, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Jeju, Korea, 2010, pp. 238-241, in Korean.

55. D.K. Kim, K.H. Jung, S.H. Kang, Y.T. Im, Prediction of phase transformation and mechanical property of carbon steel in quenching based on finite element analysis, The Korean Society For Technology of Plasticity (KSTP) Fall Workshop, Gangneung, Korea, 2009, pp. 173-176, in Korean.