2/06/2018 3D Derby Requirements (Exit Ticket)

The car must be completely drafted by the students. Cars will be designed and printed prior to the competition,

using 3D modeling software and the Makerbot 3D Printers.

• The entire car (body, wheels, axels...) must weigh 100 grams or less.

• Car dimensions must be no larger than 5” long x 2.5” wide x 2” tall. (127mmx63.5mmx51mm)

• There must be more than 1/4” (6.35mm) clearance under the car between the wheels.

• There must be more than 1 5/8” (41.275mm) between the wheels. See Track Specifications here.

• The entire car must be printed, the only exception is the nails/screws and weights.

• The car may be printed in pieces and then assembled with glue.

• Teams must also submit a Design Document by 11:59 pm March 3, 2018 to the 3D Derby Design Document